User Manuals Simplified.
Honeywell TG-7FS LTE Commercial Fire Alarm Communicator General Purpose When preparing a specification or quotation for the use of a Telguard cellular device in a commercial fire application, it may be necessary to supply a detailed functional description of the equipment. The architectural and Engineering Specifications presented in this publication cover such information for the …
Continue reading “Honeywell TG-7FS LTE Commercial Fire Alarm Communicator Owner’s Manual”
NOTIFIER 411UDAC Fire Alarm Communicator 411UDAC Rev 2 Fire Alarm Communicator Communicators General The Fire-Watch 411UDAC Rev 2 is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four chan-nels (inputs) that accept waterflow devices, two-wire and four-wire smoke detectors, pull stations, and other …
Continue reading “NOTIFIER 411UDAC Fire Alarm Communicator Owner’s Manual”
Honeywell IPGSM-4GC Fire Alarm Communicator Fire Alarm Communicator IPGSM-4GC IP Internet & GSM Dual Path Fire Communicator General The IPGSM-4GC is a fire alarm communicator that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This easy to install, dual path communicator connects directly to the primary and …
Continue reading “Honeywell IPGSM-4GC Fire Alarm Communicator Owner’s Manual”
411UDAC Fire Alarm Communicator Owner’s Manual February 6, 2006 411UDAC Fire Alarm Communicator Section: Control/Communicators DF-51852 A3-050 GENERAL The Fire-Watch 411UDAC from Fire Lite is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two- and four-wire …
Continue reading “Honeywell 411UDAC Fire Alarm Communicator Owner’s Manual”
Honeywell 411UDAC Rev 2 Fire Alarm Communicator General The Fire-Watch 411UDAC Rev 2 is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two-wire and fourwire smoke detectors, pull stations, and other normally-open contact devices. The 411UDAC …
Continue reading “Honeywell 411UDAC Rev 2 Fire Alarm Communicator Owner’s Manual”
IPDACT IP Fire Alarm Communicator Instructions IP Fire Alarm Communicator The new Silent Knight IP communicator, UL listed for monitoring of Silent Knight fire alarm panels. (See compatibility table) The IP Communicator has two supervised inputs, and two additional outputs.The IP-Communicator with Up/download adds a modem daughter board (2UD) that supports upload/download over the Internet …
Continue reading “Honeywell IPDACT IP Fire Alarm Communicator Instructions”
POTTER PFC-7501 Fire Alarm Communicator Instruction Manual This equipment generates and uses radio frequency energy and, if not installed and used properly in strict accordance with the manufacturer’s instructions, may cause interference with radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device …
Continue reading “POTTER PFC-7501 Fire Alarm Communicator Instruction Manual”
POTTER PFC-7500 Fire Alarm Communicator Instruction Manual Before You Begin About this Guide This guide provides programming information for the Potter PFC-7500/PFC-7501 Panels. After this introduction, the remaining sections describe each programming menu item function and its available options. The PFC-7500/PFC-7501 panels contain all programming information in an on-board processor and do not require an …
Continue reading “POTTER PFC-7500 Fire Alarm Communicator Instruction Manual”
