Cell2 Manuals & User Guides

Cell2 SAF206S Electronic Siren User Guide

February 28, 2023

Model SAF206S Electronic Siren Installation and operation manual Notice to installer Before installation and use -- read all instructions and warnings. Deliver this manual to the end user of this equipment. Doc. No.: SAF206S Siren_v.2 GENERAL DESCRIPTION The SAF206S Siren…

Brand: Cell2

cell2 B18-DC Dual Colour LED Beacon User Manual

February 28, 2023

B18-DC Dual Colour LED Beacon User Manual WIRING / OPERATION Permanent Mount: BLACK: To -Chassis Ground RED: To +VDC (fuse@5A) for Warning Mode in COLOUR1 YELLOW: To +VDC (fuse@5A) for Warning Mode in COLOUR2  (RED + YELLOW):  To +VDC (fuse@5A)…

Brand: Cell2

Cell2 Photon 8H Riser Block User Manual

February 28, 2023

Photon 8H Riser Block User Manual TRAFFIC WARNING LIGHT Manual INTRODUCTION This lamp is a LED warning light for fixed or temperer/ application in road warning, informing or guiding. WIRING OPERATION For Flash Pattern Selection: While activating in Warning Mode,…

Brand: Cell2

Cell2 SW833 8+2 Outputs Control Panel User Manual

February 28, 2023

Cell2 SW833 8+2 Outputs Control Panel Warning & Precautions NOTICE TO INSTALLER Before installation and operation – read all instructions, warnings and precautions thoroughly and carefully. Deliver this manual to the end user of this product Failure to follow these…

Brand: Cell2

cell2 B19 LED Beacon User Manual

February 28, 2023

B19 LED Beacon User Manual WIRING / OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHOM: Apply +VDC continually for low power operation YELLOW: Flash patterns & Synchronization Connect YELLOW wires of beacons together for synchronization…

Brand: Cell2

Cell2 R65 Mini Light Head User Manual

February 28, 2023

R65 MINI LIGHT HEAD User Manual Surface Mount Connect YELLOW wires of multiple light heads together for synchronization (All heads should be set at the same Flash Pattern) For Simultaneous or Alternating Flash: Apply +VDC to RED and YELLOW wires…

Brand: Cell2

cell2 B12 LED Beacons User Manual

February 28, 2023

LED BEACON User Manual OPERATION RED: To +VDC BLACK: To Chassis Ground (-) FLASH PATTERN SELECTION Open Twist the dome lens counter clockwise B, then lift the dome lens to open. Change Momentarily push the red button to change to…

Brand: Cell2

cell2 Reactor LED Warning Modules User Manual

February 28, 2023

cell2 Reactor LED Warning Modules WARNING LIGHTHEAD Wiring To+VDC for Warning Mode (fuse @ 1A):...............RED To Chassis Ground:.......................................BLACK For Synchronization and Flash Pattern:........YELLOW Connect YELLOW wires of all lightheads together for synchronization. (All lightheads should be set to the same…

Brand: Cell2

Cell2 B19 – AC Mirror Mount User Manual

February 28, 2023

Cell2 B19 - AC Mirror Mount WIRING/ OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHITE: Apply +VDC continually for low power operation Note: All units should be set at the same pattern…

Brand: Cell2

Cell2 B19 Internal Magnetic Mount User Manual

February 28, 2023

Cell2 B19 Internal Magnetic Mount WIRING/ OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHITE: Apply +VDC continually for low power operation Note: All units should be set at the same pattern Momentarily…

Brand: Cell2