Building Automation Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Building Automation products.

Tip: include the full model number printed on your Building Automation label for the best match.

Building Automation manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Carrier i-Vu Pro Simplify Building Management with Building Automation User Guide

November 13, 2025

Carrier i-Vu Pro Simplifies Building Management with Building Automation Product Information Specifications Transfer Protocol: TCP, UDP Ports: 80 (TCP), 443 (TCP), 47806 (TCP), 47808 (UDP/TCP), 47812 (UDP), 50005-50008 (UDP) Uses: HTTP, HTTPS, WSS, Alarm Notification, BACnet/IP, CCN/IP, Firmware CCN/IP, Diagnostic…

Brand: Carrier

E Plus E Elektronik EE160 Humidity and Temperature Sensor for Building Automation User Guide

December 22, 2024

E Plus E Elektronik EE160 Humidity and Temperature Sensor for Building Automation Specifications: Product Name: EE160 - Humidity and Temperature Sensor for Building Automation Electrical Connection: Bus termination with 120 Ohm resistor Address Setting: Via PCS10 Product Configuration Software or…

Brand: E Plus E Elektronik

JENESYS PC9000 Building Management System For Building Automation Instructions

October 10, 2023

JENEsys® PC9000 Frequently Asked Questions PC9000 Building Management System For Building Automation Questions? Contact us at sales@lynxspring.com JENE is a registered trademark of Lynxspring Inc. 2023

Brand: JENESYS