systemair 24806 EC-BASIC-U Universal 0-10V Controller
Description
- Simple to install, connect and set up
- 50/60HZ mains option
- Can be used with all 220V single phase and 380V three phase EC fans
- Can accept 0-10V input from any control sensor or BMS
- Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
- Demand control made simple
The controller compares input signal with an adjustable set point and regulates a 0..10 V output signal applied to a ventilator with a PI algorithm in direct or reverse action based on jumper JP1 setting:
- JP1 closed 1-2 = reverse action
- JP1 closed 2-3 = direct action
Technical parameters
| Voltage | 85-265 | V |
| Power consumption | max 0,46 | W |
| Frequency | 50/60 | Hz |
| Temperature range | -20-50 | °C |
| Working range | 0…100% |
Dimensions
Accessories
Electric accessories
- Systemair-1M CO2 duct sensor (14908)
- Systemair-1 CO2 duct sensor (14906)
- Systemair-2 CO2 duct sensor (14907)
Documentation
- IMO_EC-BASIC_EN_SV_rev3.pdf (1,42MB)
- 24806_Declaration of Conformity_EN.pdf (127,33kB)
Wiring
Get In Touch
Call: 0845 6880112
Email: info@adremit.co.uk
Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard, Settle, North Yorkshire, BD24 9RH
Documents / Resources
 |
systemair 24806 EC-BASIC-U Universal 0-10V Controller [pdf] Instructions 24806 EC-BASIC-U Universal 0-10V Controller, 24806, EC-BASIC-U Universal 0-10V Controller, Controller |
