Swissten Flypods True Wireless Stereo Earbuds
- wireless earbuds
- charging cable
- loading box
- MFS multifunction sensor
- Charging pin
- Micro USB connector
- Led charging indicator light
- Loading box
- Open the charging case and remove both earbuds from the case
- If the earbuds are fully charged, they are ready to be pairing
- Activate Bluetooth on your phone
- Select Swissten FlyPods from the device list
- FlyPods will pair with your phone
FlyPods will be memorized by the mobile phone, so the next use will be automatically connected.
Play / pause: double tap the right earbud
Next song: double tap the left earbud
Answering / hanging up a call: double tap on the right / left earbud
Voice assistant: touch 3x on the right / left earbud
On: Remove the earbuds from the charging box, or touch the MFS sensor and press for 3 seconds.
Disconnect: place the earbuds in the charging box, or touch the MFS sensor and press for 5 seconds.
Charge the box using the included micro USB cable.
The charging time is 1.5 to 2 hours.
If the led light flashes, the box is charging.
If the led light glows steadily, the box is fully charged.
Functions and features
Bluetooth Version : 5.0
True Wireless Stereo – TWS
Operating range: 10 m
Battery earbuds: 30 mAh
Battery box: 550 mAh
Operating autonomy: 3 hrs
Operating time with box: up to 24 hrs
Weight earbuds: 3.45 g / each
Earbud dimensions: 43 x 16 x 17 mm
Box weight: 33 g
Box dimensions: 52 x 52 x 21 mm
BT profiles; HFP, A2DP, AVRCP, HSP
Freq. Response: 20Hz – 20KHz
Sensitivity: 100 db + – 3db