Richtech V3 W Automated AI Temperature Screening System (AATSS)

PLEASE NOTE:

The purpose of this manual is to ensure that the user can use this product correctly, and to avoid danger or damage to the product during operation. Please read this manual carefully before using the product and keep it for future reference. Without written permission, no entity or individual is allowed to extract, copy, translate or modify all or part of this manual in any way. Unless otherwise agreed upon, the company does not provide any express or implied statement or guarantee.

ATTENTION:

1. Do not splash liquid on the outer screen or make contact with metal to avoid scratches and/or damage
2. Use specialized detergent to clean the equipment to avoid watermarks
3. Please ensure that the equipment is well grounded to avoid interference and damage to video and audio signals
4. Please wait 5-10 minutes after the unit is initially switched on for it to detect temperature accurately

1. About AATSS model V3

The V3 is designed for easy integration into your local area network and existing access control systems. Combining high-precision infrared temperature detection with face recognition technology and a full suite of software functions, the AATSS V3 is the ultimate all-in-one solution for swift fully-automated contactless temperature screening.

In the Health Questionnaire Mode, you can use your smartphone/ tablet to finish the questionnaire and get a complete QR code. The code can be read on the V3 W QR code reading area. The temperature measurement only activates after you pass the questionnaire and QR code reading successfully. A badge prints out after the temperature scan.

Image Description: An image of the Richtech V3 W Automated AI Temperature Screening System, showing a screen displaying a person wearing a mask, a temperature reading of 96°F, and a 'PASS' status.

Image Description: A diagram of the Richtech V3 W unit mounted on a stand, with a Wi-Fi symbol indicating connectivity.

2. Table Stand Installation

Image Description: Illustrations of the table stand installation process. The first image shows the components laid out: the V3 unit, cables, and the stand base. The second image shows the V3 interface cables being threaded through the center hole of the stand base.

2.1. Slip the V3 interface cables through the center hole of the Stand Base.

2.2. Screw the V3 mount into the base stand and secure it from the bottom using the helix nut provided. The mount is meant to be screwed in, not forced in directly.

Image Description: Images depicting the connection of cables to the stand base. The first shows the V3 unit connected to the stand base with Ethernet and power cables. The second shows a close-up of the stand base connectors with cables attached.

2.3. Connect the Ethernet and Power Cable to the Stand Base connectors.

2.4. Completed installation:

3. Display Pedestal Installation

If you ordered a Display Pedestal, the installation method is very similar to the Table Stand.

Image Description: Images of the Richtech V3 W unit on a display pedestal. The first shows a hand holding the unit, and the second shows the screen displaying a temperature reading.

3.1 Open the stand base and use the screwdriver to remove the backside cover.

3.2 Slip the V3 interface cables through the center hole of the Stand Base.

Image Description: Illustrations for display pedestal installation. The first image shows the stand base with its backside cover removed. The second image shows the V3 interface cables being threaded through the center hole of the stand base.

3.3 Pass all the data interface cables through the hole in the stand backside cover.

3.4 Connect the USB, Ethernet, and Power Cable to the Stand Base connectors.

Image Description: Images showing the final steps of display pedestal installation. The first shows the V3 mount being screwed into the base stand. The second shows the backside cover being secured with screws.

3.5 Screw the V3 mount into the base stand and secure it from the bottom using the helix nut provided. The mount is meant to be screwed in, not forced in directly.

3.6 Secure the backside cover using screws.

Image Description: Two images of the fully installed Richtech V3 W on display pedestals. The left unit is shown with its screen adjusted to the side with a blue light bar.

3.7 Upon completing installation, adjust the screen to the side with the blue light bar.

3.8 Power Adaptor Connection and Ethernet Connection

Connect the power supply to the base of the stand. The system will start automatically after powering on, the boot time is about 30 - 40 seconds.

If you need to manage the V3 through a network, connect the base to your router via an ethernet cable. For instructions on how to set up the network, please refer to the following Software section.

If you would like to connect the device to an existing access control system, please refer to the Access Control Integration section.

4. About V3 QR Kiosk model

The V3 QR Kiosk is designed for easy integration into your local area network and existing access control systems. Combining high-precision infrared temperature detection with face recognition technology and a full suite of software functions, the V3 QR Kiosk is the ultimate all-in-one solution for swift fully-automated contactless temperature screening.

In the Health Questionnaire Mode, you can use your smartphone/ tablet to finish the questionnaire and get a complete QR code. The code can be read on the V3 QR Kiosk code reading area. The temperature measurement only activates after you pass the questionnaire and QR code reading successfully. A badge prints out after the temperature scan.

Image Description: A diagram of the Richtech V3 QR Kiosk unit mounted on a tall stand.

4.1 Install the stand base and the column

Image Description: Illustrations for installing the column of the V3 QR Kiosk. The first image shows the back cover of the column being opened. The second image shows the column being screwed onto the stand base.

4.1.1 Open the back cover of the column

4.1.2 Screw the column with the stand base

Image Description: Images detailing the V3 QR Kiosk column installation. The first shows the stand base being tightened. The second shows the back cover of the column being secured.

4.1.3 Tighten the stand base

4.1.4 Secure the back cover on the column

Image Description: An image of the fully installed V3 QR Kiosk, featuring a large green checkmark and the word 'COMPLETE'.

4.1.5 Installation complete

4.2 Paper Installation

ATTENTION: When device shows “OUT OF PAPER.PLEASE CHECK AND ADD PAPER”, you need to check and add paper.

Image Description: Illustrations for paper installation in the printer. The first shows a finger pressing a printer button to open the access. The second shows a roll of label paper being inserted into the printer.

4.2.1 Press the printer button

4.2.2 Put the label paper inside of the printer

Image Description: Images showing the completion of paper installation and cable connections. The first shows the printer cover being closed. The second shows a close-up of the stand base connectors with power and Ethernet cables attached.

4.2.3 Close the printer cover

4.2.4 Connect the power and Ethernet cable to the stand base connectors

4.3 QR Code Reading and Temperature Scanning

Image Description: Illustrations of the QR code reading and temperature scanning process. The first shows a person holding a smartphone with a QR code in front of the V3 QR Kiosk's reading area. The second shows a person standing in front of the device to initiate temperature screening.

4.3.1 Put the complete QR code in front of the QR code reading area

4.3.2 After validating the QR code, you can stand in front of the device to start temperature screening.

Image Description: An image showing the printer dispensing a badge after the temperature scan is complete.

4.3.3 The printer prints a badge after the scanning

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Contact Information

Website: www.richtech-ai.com

Email: service@richtech-ai.com

Phone: +1-856-363-0570