User's Manual

Guide of Manual

• Thank you for your choice. We will do our best to provide customer service for everyone.
• Please check to make sure all parts are included as stated when you unpack. If there are parts missing or wrong, please contact us, we will expeditiously provide reissue accessories, compensation or other services.
• Instruction should be read carefully. But the manual may not cover every detail of all possible situations and steps. Please contact us if further information and help are needed. We will respond in a timely manner.
• Please be patient that the other items are on the way if you buy more than one product.

Warning

• It's kindly advised to assemble this product on a carpeted floor to protect it from being scratched.
• Small parts are included. Please keep the product away from children while assembling. Do not let children play or jump on the product. Do not stand on the item or use as a step ladder.
• Please pay attention to the sharp corners during assembly. We recommend the use of gloves to prevent the undesired injury.
• Prior to use, please check to see if there's any loosening screw or part. Make sure that each screw and part is correctly installed and securely fastened.
• It's unnecessary to use electric drill. Please at a low gear if you need.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• There's no need to use furniture polish. If you need, test it first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
• Liquid spills should be removed immediately. Gently blot the spill with a soft clean cloth to avoid rubbing.

Further Advice about the Furniture Care

• It is best to keep your furniture in a climate-controlled environment.
• We recommend to keep furniture from sunlight exposure to avoid possible surface damage.
• Following these important and helpful tips will help retain your furniture's performance even when it ages.
• Periodically (every 90 days) make sure the screws are fully tightened.

Max Weight Capacity

350 lbs [Do not stand on the item]

Parts and Hardware List

Make sure all parts are in the package.

'+' in below list indicates that additional pieces are replacement parts.

Do not fully tighten anything until all screws, nuts, washers and bolts are in place.

Parts List

Hardware List

Assembly Instructions

Step 1

Prepare the base of the recliner. Ensure all parts are present. It is recommended to assemble on a carpeted floor to prevent scratching. Keep small parts away from children. Do not allow children to play on or jump on the product. Do not stand on the item or use it as a step ladder. Be mindful of sharp corners during assembly; gloves are recommended. Before use, check that all screws and parts are correctly installed and securely fastened. An electric drill is not necessary; if used, set it to a low gear.

Diagram Description: Shows the underside of the recliner frame. Components E (Front Legs) and F (Back Legs) are shown separately. Hardware items 1 (Flat washer), 2 (Felt Pad), 3 (Screw), and 4 (Screw Driver) are also displayed.

Step 2

Attach the legs to the base of the recliner. Use four flat washers (1) for this step. The diagram shows two front legs (E) and two back legs (F) being attached to the corresponding mounting points on the recliner's base. Each leg attachment appears to use one washer.

Diagram Description: Shows the recliner base with two front legs (E) and two back legs (F) being attached. Four flat washers (1) are indicated for this step.

Step 3

Attach the backrest to the recliner frame. Use four screws (3) for this step. The diagram shows the backrest (A) being aligned with the mounting points on the recliner's frame and secured with screws.

Diagram Description: Shows the backrest (A) being attached to the main recliner body using four screws (3).

Step 4

Attach the left and right wings to the recliner. Use four screws (3) for this step. The diagram shows the left wing (C) and right wing (D) being aligned with the sides of the recliner and secured with screws.

Diagram Description: Shows the left wing (C) and right wing (D) being attached to the sides of the recliner using four screws (3).

Step 5

Complete the assembly by attaching the side wings. The diagram shows the final placement of the wings onto the recliner body.

Diagram Description: Shows the recliner with the left wing (C) and right wing (D) fully attached to the sides.

Finished

FINISHED

Diagram Description: Shows the fully assembled Balderich Series Recliner.