PIXIE Garage Door & Gate Controller

Basic Operation

• Set up via PIXIE App
• 4 clicks manual pairing
• 9 clicks reset device

Applications

Garage doors and gates which accept a dry contact input signal.

What's in the Box

• 1 x Garage door & gate Controller
• Installation instructions

Accessories

CSR41BTP Contact Sensor as per page 2.

Download the PIXIE and PIXIE PLUS Apps

Scan the QR code or visit your app store to download the PIXIE and PIXIE PLUS Apps.

[App Store]

[Google Play]

Product Overview

The PIXIE Gate & Door Control is designed to control motorised sliding gates, swing gates and garage doors which accept dry contact signals (such as bell press, voltage free signal, dry-contact etc) as a command input. It's capable of monitoring the open/close status via a set of contact sensors (sold separately), and sending status change notifications to the user as required via PIXIE PLUS App only.

Features

• Garage Sensor part#: CSR41BTP – required for STATUS & Push Notifications (Gateway Needed for notifications)
• Control 1 sliding gate, or 1 swing gate, or up to 2 garage doors.
• Works with wired contact sensors (magnetic reed switches) for different gates and doors, providing monitoring of open / close status.
• Two in-built buttons for easy setting and testing.
• Two LED indicators to reflect the contact sensor's position status.

Electrical Specifications

*** Depending on building materials and construction.

Related Products

• Roller Door Contact Sensor #CSR41BTP
• PIXIE Dual Relay #PC206DR-R-BTAM
• PIXIE Translator #PC100T-R-BTAS
• PIXIE Gateway G3 #SGW3BT

Wiring Diagram

The diagram illustrates the wiring connections for the PIXIE Garage Door & Gate Controller. It shows terminals for 'Contact sensor 1 (Must)', 'Contact sensor 2 (Optional)', 'Garage Door 2 motor signal input terminals (Optional)', and 'Gate/Door 1 motor signal input terminals (Must)'. The device dimensions are 110 mm in length and 26 mm in height.

Roller Door Contact Sensor (CSR41BTP) Details

Contact Mode: Normally closed (N.C.)

Operation Gap: >40mm

Operation Voltage: <100V DC

Operation Current: <500mA

Reed Switch Dimension: L106 x W48 x H10 mm

Magnet Dimension: L88 x W20 x H21 mm

Cable Length: 650mm

Installation Method: Surface mounted

PIXIE Integration

PIXIE products are designed to fit into a huge range of Australian wall plates.

Description of image: Shows PIXIE light switches and dimmers in various colours (white, grey, black) installed in Australian wall plates.