Quick Start Guide

How to Wear

Adjust the ear hooks between four levels to find the most comfortable and secure fit and achieve the best listening experience.

Powering On & Pairing

1. For first-time use, remove the insulation stickers.
2. Return the earbuds to the charging case.
3. Take out the earbuds again, they will automatically power on and enter Bluetooth pairing mode.
4. Select "soundcore V40i" on your device's Bluetooth list to connect.

Manual Pairing

1. Tap and Hold (5s)

Touch Controls

Dual Earbuds

• Tap twice on the touch area on either earbud to answer incoming calls.
• Tap and hold the touch area on either earbud for two seconds to end or reject the call.

Single Earbud

• Tap twice on the touch area on either earbud to answer incoming calls.
• Tap and hold the touch area on either earbud for two seconds to end or reject the call.

Support and Warranty

For FAQs and more support information, please visit:

Download APP

Scan the QR code to view the detailed user guide.

18-month limited warranty

Contact information:

• Email: service@soundcore.com
• Email: support.mea@soundcore.com (For Middle East and Africa Only)
• Email: support@anker.com (Japan)
• Email: support.kr@anker.com (Korea)
• Phone: +1 (800) 988 7973 (US/Canada)
• Phone: +44 (0) 1604 936 200 (UK)
• Phone: +49 (0) 69 9579 7960 (DE)
• Phone: 03 4455 7823 (Japan)
• Phone: +86 400 0550036 (China)
• Phone: +82 1666-8470 (Korea)
• Phone: +971 8000320817 (UAE)
• Phone: +966 8008500030 (KSA)
• Phone: +965 22069086 (Kuwait)
• Phone: +20 8000000826 (Egypt)
• Phone: +90 (850) 460 14 14 (Türkiye)
• Phone: +8 (800) 511-86-23 (Russia)
• Phone: 000-8000-504-414 (India)

Important Safety Instructions

• Do not disassemble.
• Keep out of the reach of children. The product contains small parts which may be a choking hazard.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments.
• Ensure there is no liquid, sweat or water on the charging port when charging.
• Refer to your user manual for your earphones' waterproof level and follow the corresponding instructions.
• For IPX4: Do not expose earphones to dripping or splashing water.
• For IPX4, IPX5, and IPX6: Do not submerge earphones in water.

Hearing Safety

• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not turn the volume so high that you're unable to hear your surroundings.
• Do not use earphones while driving.
• You should use caution or temporarily discontinue use in potentially hazardous situations.

Magnetic Field Warning

The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and other implants. Always maintain a distance of at least 3.94"/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.

Notice

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support.soundcore.com/s/articleRecommend?type=DownLoad&secondType=doc

Disposal Information

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

This symbol indicates "separate collection" for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/gas, don't disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.

FCC Statement

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC NOTICE TO CANADIAN USERS

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Important Safety Instructions (Multiple Languages)

Please refer to the multilingual safety instructions provided throughout the document.

Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.