SEA HEAD and SMART Transmitters
This document provides comprehensive information regarding the SEA HEAD and SMART series of transmitters, designed for the automation of doors, gates, and leaves. These devices operate on radio frequencies of 433.920 MHz and 868.300 MHz, offering reliable and secure command transmission.
Product Overview
The SEA HEAD and SMART transmitters are electronic devices engineered for transmitting digital data to compatible SEA receivers. They are utilized to automate the opening and closing of various access points such as doors, gates, and shutters. The transmitters are available in different channel configurations (2-channel, 3-channel, and 4-channel) and utilize advanced coding technologies, including fixed code and rolling code for enhanced security.
Key Features and Specifications:
- Frequencies: 433.920 MHz and 868.300 MHz
- Power Supply: Typically 12V (23A battery) or 3Vdc (CR2032 or 2xCR2016 batteries)
- Range: Up to 100 meters (subject to environmental conditions)
- Code Types: Digital (66-bit, 12-bit, 4096 combinations), Rolling Code (64-bit encrypted)
- Operating Temperature: -20°C to +55°C
- Storage Temperature: -30°C to +80°C
- Dimensions: Approximately 64 x 35 x 14 mm
- Humidity: 5% to 90% non-condensing
Intended Use
These transmitters are designed exclusively for use as digital data transmitters, sending commands to compatible SEA receivers. They are intended for automating the operation of doors, gates, and other automated access systems. Users must ensure that the transmitters are used only with SEA receivers operating on the same frequency and with compatible coding.
Maintenance and Battery Replacement
The primary maintenance task for these transmitters is battery replacement. It is recommended to replace the battery every two years or when a significant reduction in range or functionality is observed. The battery type varies by model (e.g., 23A, CR2032, 2xCR2016). Used batteries should be disposed of responsibly in designated collection containers.
Programming and Code Setting
Specific programming procedures are provided for different transmitter models. Generally, this involves setting a unique code combination on both the transmitter and the receiver using DIP switches or a specific button sequence. For models like the SMART DUAL-COPY, a cloning procedure is outlined, requiring the original transmitter to be present during programming.
- DIP Switch Models: Users must set the same code combination on the receiver and the transmitter using the 10-way microswitch.
- SMART DUAL-COPY Programming: Involves pressing specific buttons on the transmitter to enter programming mode, followed by pressing the desired button to store the code, and then pressing the button on the transmitter to be cloned. The LED indicator confirms successful programming.
Safety and Environmental Considerations
SEA emphasizes responsible product usage and disposal. Users are advised against dispersing packaging materials into the environment. The product is designed to comply with relevant European directives (e.g., 1999/5/CE R&TTE). Proper disposal of electronic waste is crucial; users should follow local regulations for recycling electronic equipment.
Declarations of Conformity
All SEA transmitters mentioned in this document conform to the relevant European directives and standards, ensuring their compliance with safety and electromagnetic compatibility requirements.
Contact Information
For spare parts or further inquiries, contact SEA S.r.l. at Zona Ind.le, 64020 S.ATTO - Teramo - Italia.
Model Information
The document covers various SEA transmitter models including:
- HEAD Series (2-channel, 4-channel)
- SMART Series (2-channel, 3-channel DIP SWITCH)
- SMART DUAL-COPY Series (2-channel, 3-channel)
- SMART ROLLING CODE Series (2-channel, 3-channel)
Specific model codes are provided, such as 23110210, 23110305, 23110316, 23110360/365, 23110380/385, 23110451/53, 23110350/355, and 23110370/375.
