⚠️ SAFETY GUIDE
WARNING: After turning on the humidifier, it is necessary to wait 30-40 minutes for the water to heat to boiling before the mist can be produced.
- DO NOT use this appliance until you have read the safety warnings and operating instructions. Risk of fire, malfunction, property damage, electric shock, serious injury, or even death may result if warnings and instructions are not adhered to.
- The manufacturer declines all responsibility for personal injury or damage to animals or objects caused by inappropriate use of the appliance according to the warnings for installation, use, and maintenance described in this instruction manual.
- This appliance is not to be used or have maintenance performed by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given strict supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Before connecting the humidifier to a power source, please ensure your home power supply (voltage & frequency) matches the specifications marked on the product label.
- Clean the water scale and dust from the water tank regularly. Make sure to turn off the power and unplug the device before cleaning or moving it.
- Do not immerse the cord, plug, or electric body in water or any other liquid to protect against fire, electric shock, and personal injury.
- When unplugging the power plug, make sure your hands are dry to avoid the risk of electric shock.
- Using accessory attachments not recommended by the manufacturer may result in fire, electric shock, or injury.
- Do not move the appliance with water in it.
- Do not open the lid to touch the inner tank (stainless steel inner pot) while it is turned on.
- Avoid covering the mist outlet with a towel or any other object while the appliance is in operation.
- Keep the humidifier away from babies and children, and do not place it in a cot, pram, or playpen. Also, do not allow babies and young children to play with or use the appliance to avoid accidents.
- Do not use the appliance near any combustibles or in a wet environment.
- Do not add essential oils or any other substances to the appliance.
- Keep the appliance away from heat sources such as stovetops, ovens, radiators, etc. Also, keep it away from furniture and other household appliances to avoid moisture.
- This appliance is for indoor use only. During thunderstorms or when not in use for a long period of time, unplug it.
- Do not use any appliance with a damaged cord or plug, or if it malfunctions, or if it is dropped or damaged in any way. Contact customer service.
- Ensure that the appliance is at room temperature before operating it.
- Use the appliance only on flat and stable surfaces.
- Do not block the mist outlet, do not fill water from the mist outlet.
- Do not disassemble any of the original body parts.
- Use this appliance with care to prevent burns from the hot steam emitted from the mist outlet.
- Do not use the appliance to cook with acids or alkalis, as this will seriously endanger its life.
- The water tank is made of stainless steel, do not wash it with wire balls or any other hard objects.
- Keep babies and children away from the appliance, as the outer body and hot steam mist can cause burns when the appliance is in use.
- Place the humidifier on a flat surface away from walls and furniture to prevent damage from moisture.
COMPONENTS
Product Details
- Removable Cover Plate
- Control Screen
- Steam/Mist Outlet: Note: Extremely hot during operation. Do not touch!
- Body
Accessories:
- Power Cord
- Water Tank: Made of 304 Stainless Steel.
SPECIFICATIONS
| Model Number | GLS04 |
| Voltage | 120 V/60 Hz |
| Power | 600 W |
| Capacity | 4 L |
| Mist Output | 500 ML/H |
PRODUCT USAGE
Step 1: Add Water
Place the humidifier on a flat surface, open the top cover, and fill in an appropriate amount of distilled water, purified water, or cooled boiled water into the water tank.
*Ensure the power is off when filling the water tank and cleaning the humidifier.
Attention: Make sure not to exceed the MAX line, which indicates the maximum water scale.
Step 2: Place the Water Tank
Dry the outer surface of the water tank and the bottom heating plate. Then, put the tank into the body and gently rotate it left and right to ensure that the tank and the heating plate are in full contact.
Visual Description: Diagram shows the correct placement of the water tank on the heating plate, contrasting with incorrect methods where contact is not fully established.
Step 3: Lock the Lid
It is important to lock the lid by sliding the slide lock downward to the “Lock” position. To unlock the lid/cover, push it upward to the “Unlock” position. Slide lock to open the lid/cover.
Visual Description: Diagram illustrates the slide lock mechanism with "UNLOCK" and "LOCK" positions indicated by arrows.
Step 4: Connect Power
Plug the power cord into the unit, switch on the power supply, and the ? [power-button] will light up the display. The humidifier has entered standby mode.
Visual Description: Diagram shows the humidifier unit and a separate diagram of the control panel displaying standby mode indicators.
Step 5: Select Working Mode
Press the ? [power-button] to turn on the humidifier, choose your work mode, and the humidifier will start working after 5 seconds.
*Do not touch the mist outlet hole or the outer body shell with your hands to prevent burns.
Visual Description: Diagram of the control panel showing various mode selections.
FUNCTION DESCRIPTION
- ? ON/OFF
Press it to turn on the machine, and all the function buttons (including “Mist Mode,” “Timer,” and “Lock”) will light up. Press the “On/Off” button again, and the humidifier will return to standby status.
(If there is no operation after the first press, the humidifier will automatically switch to standby mode after 30 seconds.)
- ? Lock
Long press it for 2 seconds to lock and unlock the screen. Press it short to turn on/off the light.
- ? Mist Mode
Press it to select the mist level between “Standard Mode”, “Fast Mode”, “Sleep Mode”, and "Auto Clean”. The device will work after 3 seconds, and the screen will display the selected mode.
*Auto Clean: It takes about 1.5 hours to clean the tank. It is recommended to add citric acid for better results.
ICON MODE MIST LEVEL ♨️ Fast Mode 75% 〰️ Standard Mode 65% ? Sleep Mode 55% Note: After selecting the mist level, the screen will automatically turn off after 1 minute. Press the ? [power-button] and ? [mist-button] again to activate the screen.
- ⏰ Timer Setting
The timer can be set from 1-12 hours in increments of 1 hour. The humidifier will shut down automatically when the time reaches the set value.
Note: In auto clean mode, the timer cannot be set.
- ? Waterless
When the water level is too low, the water shortage icon on the display will light up red. The machine will automatically shut down and all selected functions will be turned off at the same time.
- "OP" (Top Cover Open Indicator)
When the top cover is opened during working, the humidifier will automatically shut down and the display will show “OP”. The humidifier will continue to work after closing the top cover.
- "Anti-Tipping"
When the machine tilts more than 45°, it will automatically shut down. After resetting, press the power button to turn on the device, it will work again.
MAINTENANCE AND CLEANING
WARNING: Before cleaning, turn off and unplug the humidifier.
Cleaning Method
Visual Description: Diagrams illustrate "Water Tank Cleaning" and "Cover Plate Removing" with a "One-Click Breakaway Button" indicated.
- Clean the water tank and removable cover plate regularly, at least once a week. DO NOT immerse the body pot in water.
- Clean the stainless-steel water tank with citric acid or vinegar if there is white water scale (use with auto clean mode for better results), but do not use highly concentrated acidic washing solutions.
- Do not use chemical solvents, petrol, polishing powder, or other substances to clean the surface of the appliance, and do not use detergents to clean the machine.
- Use a dry or wet cloth to wipe the dirt on the interior of the appliance or the bottom heating plate. Do not rinse with water or wipe with a dripping cloth.
- The removable cover plate can be removed to rinse.
- Replace the residual water inside the water tank promptly to keep it clean.
- When not using the humidifier for a long time, clean all the parts, dry them, and put them into the original packing box or place them in a dry place.
TROUBLESHOOTING
| Fault Phenomenon | Possible Reason | Troubleshooting Method |
|---|---|---|
| The indicator light does not light up | Power not connected | Check power connection. |
| Circuit failure | Contact TURBRO support team for assistance. | |
| The indicator light is on but no heating | Circuit failure | Contact TURBRO support team for assistance. |
| Heating plate failure | Contact TURBRO support team for assistance. | |
| Display fault code | Bottom sensor failure | Contact TURBRO support team for assistance. |
| No mist out | Did not wait for 30-40 minutes after power on | Please wait 30-40 minutes after turning on the unit. Mist is produced when water is heated to boiling. |
Note: If the above methods still cannot solve the problems, please contact TURBRO for assistance.
WARRANTY INFORMATION
This 1-year limited warranty is extended to the original purchaser of this product and warrants against any defect in materials and workmanship under normal use and conditions, for a period of one year from the date of the original purchase, subject to the conditions and limitations outlined below.
This warranty is non-transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.
THIS LIMITED WARRANTY IS GIVEN TO THE PURCHASER IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
What Is Covered?
- TURBRO's warranty extends only to products purchased from authorized sellers that are subject to TURBRO's quality controls and have agreed to follow its quality controls.
- This warranty is limited to the repair or replacement of part(s) proved to be defective in material or workmanship after said defect is confirmed by the manufacturer's inspection.
- The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).
UPON THE EXPIRATION OF THIS WARRANTY, ALL SUCH LIABILITY WILL TERMINATE. NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED ANYMORE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
What Is Not Covered?
- Damage or losses caused by any alterations or unauthorized repair made to the product by the owner.
- Damage or losses caused by accident, neglectful operation, misuse, abuse, or use contrary to the user manual and safety guidelines.
- Damage or losses occurring during commercial use, rental use, or any use for which the product is not intended.
- Damage or losses caused by improper or inadequate maintenance.
- Failure to perform general maintenance (including cleaning).
- Use of non-standard parts or accessories.
- Natural depreciation and normal wear and tear.
TURBRO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
Obtaining Warranty Service
To obtain the benefit of this warranty, please leave a message online (www.turbro.com/contact), or send an email to support@turbro.com.
To express gratitude for choosing TURBRO, a 1-year warranty extension is provided, extending the coverage period to two years in total.
- Complete the registration of your new product at https://www.turbro.com/warranty within 90 days from the date of package delivery (inclusive of the 90th day).
- Any registration beyond this stipulated period will be deemed invalid.
- The ultimate interpretation of the terms and conditions related to the extended warranty service rests solely with TURBRO.
If your product is discovered to be defective within the specified warranty period, please contact Customer Support via support@turbro.com.
- Order ID and invoice, or bill of sale should be provided. Such payment record must be kept to verify the purchase date and establish a warranty period.
- Model and issue description should be provided in detail, preferably with pictures and videos.
- DO NOT dispose of your product before contacting us.
- DO NOT return the product unless instructed by customer service.
- The original carton should be kept in case of warranty return of the unit.
What Will TURBRO Do?
- Replace certain parts.
- Replace the item.
- Refund the item under certain circumstances.
In no event shall liability exceed the purchase price paid by the original purchaser of the product.
Any instructions or warranty included in this manual may be subject to change without notice. For the most up-to-date instructions and warranty information, please contact TURBRO via support@turbro.com.








