Guide Sensmart is a leading manufacturer of infrared thermal imaging devices for civilian applications, including handheld thermal cameras and night vision systems.
Mwongozo wa Sensmart (Wuhan Guide Sensmart Tech Co., Ltd.) is a specialized manufacturer of infrared thermal imaging products and a subsidiary of the Guide Infrared Group. Founded with a focus on bringing thermal technology to civilian markets, the company produces high-performance thermal cameras used in industrial inspection, power line maintenance, firefighting, and outdoor law enforcement.
The brand's portfolio features widely used devices such as the guide ZC series na TD series handheld thermal imagers. These products combine advanced infrared detectors with user-friendly designs to offer precise temperature measurement and clear imaging in low-visibility conditions.
Miongozo ya hivi punde kutoka manuals+ imetungwa kwa chapa hii.
Maswali ya kawaida kuhusu miongozo, usajili, na usaidizi wa chapa hii.
Avoid touching the lens with your hands, as sweat can corrode the optical coating. If the lens is dirty, carefully wipe it using professional optical lens paper.
Charge the battery strictly according to the user manual instructions. Do not charge near high-temperature sources or fire. If the battery leaks or emits an odor, stop using it immediately.
While many Guide thermal cameras are ruggedized, you should check the IP rating in your specific manual. Generally, avoid exposing the device to heavy moisture or water splashes, and keep the lens covered when not in use.
Inaccurate readings can occur if the camera is not focused correctly, if the target is reflective, or if the emissivity setting does not match the material being measured. Ensure the device is calibrated and the correct parameters are set.
Many models allow you to perform a manual calibration (often by short-pressing the power button or a specific 'C' key) to refresh the image and remove ghosting artifacts.