MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

1. Utangulizi

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1 Bidhaa Zaidiview

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 Yaliyomo kwenye Kifurushi

• MiBOXER PUSH2-3 Wireless Dimming Remote
• Mwongozo wa Mtumiaji
• Wiring terminals (pre-attached)

Kielelezo cha 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

Kielelezo cha 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. Taarifa za Usalama

Tafadhali zingatia tahadhari zifuatazo za usalama ili kuzuia majeraha au uharibifu wa bidhaa:

• Usiweke kifaa kwenye unyevu au joto kali.
• Ensure all power is disconnected before installation or wiring.
• Kifaa hiki kimekusudiwa kwa matumizi ya ndani tu.
• Usijaribu kutenganisha au kurekebisha kifaa.
• Weka mbali na watoto.

3. Bidhaa za Bidhaa

• 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
• 2.4GHz Teknolojia Isiyo na Waya: Provides reliable and interference-free communication with compatible LED systems.
• Utangamano mpana: Works with RGB, CCT, and single-color LED systems.
• Muundo wa Ergonomic: Features an easy-to-use layout for quick brightness adjustments.
• Mahitaji ya Betri: Inahitaji betri ya CR2032 (haijajumuishwa).
• Utunzaji mdogo: Designed for simple operation and long-lasting performance.

4. Vipimo

Kielelezo cha 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

Kielelezo cha 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. Kuweka

5.1 Ufungaji wa Betri

1. Tafuta sehemu ya betri nyuma ya kidhibiti cha mbali.
2. Fungua kifuniko cha compartment.
3. Ingiza betri moja ya CR2032, kuhakikisha polarity sahihi (+/-).
4. Funga kifuniko cha sehemu ya betri kwa usalama.

5.2 Kuunganisha Waya na Muunganisho

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

Kielelezo cha 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps na vidhibiti.
5. Once all connections are secure, restore power to the lighting system.

Kielelezo cha 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. Maagizo ya Uendeshaji

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 Pairing the Remote

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

1. Powering on the light fixture.
2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

• Uchaguzi wa Eneo: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
• Kupunguza: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
• Washa/Zima: A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. Matengenezo

• Kusafisha: Futa remote kwa kitambaa laini na kikavu. Usitumie visafishaji au viyeyusho vya kukwaruza.
• Ubadilishaji wa Betri: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
• Hifadhi: If storing the remote for an extended period, remove the battery to prevent leakage.

8. Utatuzi wa shida

9. Udhamini na Msaada

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER webtovuti au wasiliana na mchuuzi wako. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.

Manufacturer: Miboxer

Tarehe ya Kwanza Inapatikana: Novemba 5, 2024