edx Ergonomisk Mesh Kontorsstol CH3766G Bruksanvisning

1. Introduktion

Thank you for choosing the edx Ergonomic Mesh Office Chair. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your chair. Please read this manual thoroughly before assembly and retain it for future reference.

2. Säkerhetsinformation

• Se till att alla komponenter är på plats och oskadade före montering. Använd inte om några delar saknas eller är trasiga.
• Montera stolen på en mjuk, ren yta för att förhindra repor.
• Dra inte åt skruvarna för hårt under monteringen.
• Den rekommenderade maximala vikten för denna stol är 275 pundAtt överskrida denna gräns kan orsaka skador eller personskador.
• Håll barn och husdjur borta under monteringen.
• Use the chair only for its intended purpose.

3. Paketets innehåll

Please verify that all the following parts are included in your package:

• A: Backrest (x1)
• B: Seat Cushion (x1)
• C: Armrests (Left x1, Right x1)
• D: Mechanism (x1)
• E: Gas Lift (x1)
• F: Bas (x1)
• G: Head Pillow (x1)
• H: Hjul (x5)
• I: Legs for Base (x5)
• J: Bolts for Backrest (x3)
• K: Bolts for Mechanism (x4)
• L: Bolts for Head Pillow (x2)
• M: Bolts for Armrests (x2)
• N: Bolts for Armrests (x4)
• O: Bolts for Base Legs (x10)
• P: Plastskydd (x1)
• Q: Skiftnyckel (x1)

4. Monteringsanvisningar

För en visuell guide, se den officiella installationsvideon nedan:

1. Step 1: Assemble the Chair Base

   Divide the Base (F) into two parts. Using the Wrench (Q), install the 5 Legs (I) to the Base (F) with 10 Bolts (O). Then, press the 5 Casters (H) into the holes at the end of the Legs (I). Finally, place the Base Cover (part of F) back on the base and insert the Gas Lift (E) into the center hole of the Base (F).

   

   Bildbeskrivning: Diagram showing the overall dimensions of the chair and its 275 lbs weight capacity. This image helps visualize the assembled base structure.

2. Steg 2: Fäst armstöden på sittdynan

   Turn the Seat Cushion (B) upside down. Install the Left Armrest (C-L) and Right Armrest (C-R) to the Seat Cushion (B) using 2 Bolts (M) and 4 Bolts (N). Ensure the armrests are securely fastened. Note: The Seat (B) is marked with "FRONT"; please make sure the installation direction is correct.

3. Step 3: Attach Mechanism to Seat Cushion

   Attach the Mechanism (D) to the Seat Cushion (B) using 4 Bolts (K). Ensure the "FRONT" direction of the Mechanism (D) aligns with the "FRONT" direction of the Seat Cushion (B).

4. Step 4: Attach Backrest to Seat Assembly

   Align the screw holes of the Backrest (A) and the Mechanism (D). Using the Wrench (Q), secure both completely with 3 Bolts (J).

5. Steg 5: Anslut sitsenheten till gaslyften

   Align the hole on the Mechanism (D) with the Gas Lift (E). Carefully lower the assembled seat onto the Gas Lift and press down firmly until it is fully secured.

6. Step 6: Attach Head Pillow

   Using the Wrench (Q), attach the Head Pillow (G) to the Backrest (A) with 2 Bolts (L). Then, attach the Plastic Cover (P) to conceal the hole.

5. Användning av stolen

5.1. Höjdjustering

To adjust the chair's height, pull the lever located under the seat upwards. While pulling the lever, stand up to raise the chair or remain seated to lower it. Release the lever at the desired height.

5.2. Tilt and Rocking Function

The chair features a 90°-135° rocking function. Use the lever under the seat to engage or disengage the rocking motion. The tension of the rocking can be adjusted by turning the round knob located under the seat.

Bildbeskrivning: Illustration showing the chair's 90°-135° rocking range and the location of the recline lock/rocking tension knob and height adjustment lever.

5.3. Justerbart nackstöd

The headrest can be adjusted in height by 3.35 inches and rotated by 45 degrees to reduce neck pressure and provide optimal support.

Bildbeskrivning: Visual representation of the headrest's adjustable height (3.35 inches) and reversible angle (45 degrees).

5.4. Justerbart ländryggsstöd

The ergonomic lumbar support is designed to conform to the natural curve of your lower back. It can be adjusted vertically by 1.96 inches and horizontally by 1.1 inches to provide personalized comfort and support.

Bildbeskrivning: Detaljerad view of the adjustable and retractable lumbar support, highlighting its S-shaped design and vertical/horizontal adjustment capabilities.

5.5. Justering av armstöd

The armrests are 3D adjustable, allowing for height adjustments of 3.54 inches to suit your preference and desk height.

Bildbeskrivning: Close-up showing the breathable resilient mesh fabric, thickened 4-inch sponge material of the seat, and the 3.54-inch adjustable height feature of the armrests.

6. Skötsel och underhåll

• Rengöring: Torka rent med annonsamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh or fabric.
• Inspektion: Kontrollera regelbundet alla bultar och skruvar för att säkerställa att de är åtdragna. Dra åt vid behov.
• Hjul: Håll hjulen fria från skräp för att säkerställa smidig rullning.
• Undvik direkt solljus: Prolonged exposure to direct sunlight may cause fading of the fabric and mesh.

7. Felsökning

• Stolen justerar inte höjden: Ensure the gas lift lever is fully engaged and the gas lift is properly inserted into the base and mechanism.
• Stolens vinglar: Check all bolts and screws, especially those connecting the base, mechanism, and armrests, and tighten them securely. Ensure the chair is on a flat, even surface.
• Hjulen rullar inte smidigt: Kontrollera om det finns hår eller skräp runt hjulen. Rengör dem noggrant.
• Backrest feels loose: Verify that the bolts securing the backrest to the mechanism are tightened.

8. Produktspecifikationer

9. Garanti och support

edx values customer satisfaction. If you encounter any issues with your office chair, please do not hesitate to contact us. We are committed to providing a solution that meets your satisfaction.

For support, please refer to the contact information provided with your purchase or visit the official edx webplats.