1. Introduktion
The Dr. Senst Pulsoximeter YK-80B is a portable, non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (PR) in adults and pediatric patients at home or in medical facilities. It is designed for ease of use and provides quick, reliable measurements.
Figure 1: Dr. Senst Pulsoximeter YK-80B. This image shows the compact, white and black design of the pulse oximeter with its digital display showing readings.
2. Säkerhetsinformation
Läs all säkerhetsinformation noggrant innan du använder enheten.
- Använd inte pulsoximetern i en MRT- eller CT-miljö.
- Do not use the device in situations requiring continuous monitoring.
- Keep the device away from young children. Small parts may pose a choking hazard.
- Avoid exposing the device to direct sunlight, high temperatures, or moisture.
- Använd inte enheten om den verkar skadad.
- Consult a medical professional for interpretation of results. This device is for informational purposes and not a substitute for medical advice.
3. Produkt överview
Familiarize yourself with the components of your Dr. Senst Pulsoximeter YK-80B.
Figure 2: Labeled components of the Dr. Senst Pulsoximeter YK-80B. This image highlights the OLED-Display, Power/Mode Button, Battery Compartment Cover, and Finger Opening.
Figure 3: Display elements and dimensions of the Dr. Senst Pulsoximeter YK-80B. This image shows the device's compact size (58mm x 32mm) and points out the Oxygen Saturation (SpO2), Perfusion Index (PI), and Pulse Rate (PR) indicators on the display.
Nyckelkomponenter:
- OLED-Display: Shows SpO2, Pulse Rate, Perfusion Index (PI), and battery level.
- Ström / läge-knapp: Used to turn the device on/off and change display modes.
- Finger Opening: Where the finger is inserted for measurement.
- Batterifack: Located at the back for battery insertion.
4. Inställning
Batteriinstallation:
The device requires 2 AAA batteries (included).
- Öppna batterifackets lock på baksidan av enheten.
- Insert the two AAA batteries according to the polarity indicators (+/-) inside the compartment.
- Stäng batterifacket ordentligt.
5. Bruksanvisning
Göra en mätning:
- Se till att ditt finger är rent och fritt från nagellack eller konstnaglar.
- Öppna clamp av pulsoximetern.
- Insert one of your fingers (preferably the index or middle finger) into the finger opening until it touches the stop.
- Släpp clamp, ensuring the finger is comfortably in place.
- Press the Power/Mode button to turn on the device.
- Keep your hand still during the measurement. Readings will appear on the display within a few seconds.
- The device will automatically turn off after approximately 8 seconds of inactivity.
Figure 4: Demonstrating quick and reliable results. This image shows a hand with the pulse oximeter attached to a finger, indicating ease of use for obtaining readings.
Figure 5: Illustrating precise and painless measurement. This image shows a person's hand with the pulse oximeter on a finger, emphasizing the comfortable and accurate measurement process.
Figure 6: Ideal for measurement at home or in the workplace. This image depicts the pulse oximeter being used in both a home setting (on a bed) and a desk setting, highlighting its versatility.
Visningsinformation:
- SpO2 (%): Oxygen Saturation level. Normal range is typically 95-100%.
- PR (bpm): Pulsfrekvens i slag per minut.
- PI (%): Perfusionsindex, som indikerar pulssignalens styrka.
- Batteriindikator: Visar återstående batteritid.
6. Underhåll
Rengöring:
- Clean the surface of the device with a soft cloth damprengörs med ett milt desinfektionsmedel (t.ex. 70 % isopropylalkohol).
- Doppa inte apparaten i vatten eller någon rengöringslösning.
- Se till att enheten är helt torr innan den används igen.
Lagring:
- Förvara enheten på en sval, torr plats, borta från direkt solljus och extrema temperaturer.
- Om enheten inte ska användas under en längre tid, ta ur batterierna för att förhindra läckage.
7. Felsökning
| Problem | Möjlig orsak | Lösning | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Enheten slås inte på | Svaga eller urladdade batterier; Felaktig batteriinstallation | Byt batterier; Kontrollera batteripolariteten | ||||||||||
| Felaktiga avläsningar | Finger not inserted correctly; Movement during measurement; Nail polish/artificial nails; Cold fingers | Reinsert finger; Remain still; Remove nail polish; Warm hands | ||||||||||
Display shows "---
Relaterade dokument - YK-80B
Ask a question about this manualAsk about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it. |
