SHD050B-800480 HDMI Display Module
“
Specifications:
Model No.: SHD050B-800480
Display Size: 5.0 inch
Module Structure: LCD Display + CTP Touch +
PCB
Display Type: TFT/TRANSMISSIVE
Viewing Direction: TN: Normally White, IPS:
Normally Black
Resolution: 800 x 480 pixels
Color Pixel Arrangement: RGB Stripe
Interface Type: LCD Display – HDMI interface,
CTP Touch – USB interface
System Support: Win7/Win8/Win10 (Plug and
play), Android/Linux (need configuration)
Power Supply: USB (5.0V)
Power Consumption: 460mA (Max)
Color Depth: 16.7M
Backlight Type: White LED
Product Usage Instructions:
1. Installation:
– Connect the HDMI interface to your device.
– Connect the USB interface for touch functionality.
– Ensure power supply via USB (5.0V).
2. System Configuration:
– For Windows operating systems, simply plug and play.
– For Android/Linux systems, follow the configuration steps
provided in the manual.
3. Display Settings:
– Adjust display settings on your device to optimize viewing
experience.
– Ensure correct resolution settings for best image quality.
4. Touch Functionality:
– Utilize the touch feature for interactive use.
– Calibrate touch settings if necessary for accurate input.
5. Power Management:
– Monitor power consumption to ensure optimal usage.
– Turn off the display when not in use to save power.
Frequently Asked Questions (FAQ):
Q: Can this display module be used with Raspberry Pi?
A: Yes, this display module can be used with Raspberry Pi by
connecting it via HDMI interface and configuring the touch
functionality through the USB interface.
Q: What is the operating temperature range of the display?
A: The operating temperature range is from -10 to +50 degrees
Celsius.
Q: How many pixels does the display resolution support?
A: The display resolution is 800 x 480 pixels.
“`
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
Surenoo HDMI Display Module Series
Model No.: SHD050B-800480
USER MANUAL
Please click the following image to buy the sample
Shenzhen Surenoo Technology Co.,Ltd. www.surenoo.com
Reference Links
Surenoo HDMI Display Module Selection Guide
www.surenoo.com
P.01
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
CONTENTS
1GENERAL INFORMATION 2EXTERNAL DIMENSIONS 3ABSOLUTE MAXIMUM RATINGS 4ELECTRICAL CHARACTERISTICS 5CTP CHARACTERISTICS 6ELECTRO-OPTICAL CHARACTERISTICS 7INTERFACE DESCRIPTION 8INPUT TIMING 9RELIABILITY TEST CONDITIONS 10INSPECTION CRITERION 11PRODUCT PHOTOS
Model No.: SHD050B-800480
www.surenoo.com
P.02
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
1GENERAL INFORMATION
Item of general information
Contents
Unit
LCD Display Size (Diagonal)
5.0
inch
Module Structure
LCD Display + CTP Touch + PCB
–
LCD Display Type
LCD Display Mode Viewing Direction
Module size (W×H×T)
TFT/TRANSMISSIVE
TN: Normally White IPS: Normally Black
TN: 6:00 IPS: Full Viewing Angle
121.11×95.24
o’clock mm
Active area (W×H)
108.00×64.80
mm
Number of pixels (Resolution)
800RGB×480
pixel
Pixel pitch (W×H)
0.135×0.135
mm
Color Pixel Arrangement
RGB Stripe
–
Module Interface Type
LCD Display
HDMI interface
–
CTP Touch
USB interface
–
System Support
Win7/Win8/Win10(Plug and play)
–
Android/Linux (need to be configured first) –
Power Supply
USB (5.0V)
–
Module Power consumption
460(Max)
mA
Color Numbers
16.7M
–
Backlight Type
White LED
–
www.surenoo.com
P.03
P.04
Model No.: SHD050B-800480
0.20 2.92 3.34 3.17
95.24±0.3 PCB 77.93±0.3 PCB 75.90±0.2 LCM Outline 66.00±0.2 CTP V.A
64.80 LCD A.A
Customer Approved
121.11±0.3 PCB 120.70±0.2 LCM Outline
109.00±0.2 CTP V.A 108.00 LCD A.A
5.0″ TFT 800 X RGB X 480 Dots
0.21
5.75
6.35 4-R1.50
7.30±0.3( )
4.50 LCM
1.20( )
1.60 PCB
10.95
6.15
Display
2.35 Touch
Touch 2.35
Earphone 5.00
6.03 9.95 3.30
7.87 5.23 7.87 6.45
14.50
5.07
5.20 5.20
12.56 1.60
9.46
61
CTP
REV NO. V0
Co ntents First release
Da te 2 019-06-26
40
1
LCM
Symbol
5 GND
4 NC
3 USB D+
2 USB D-
USB TOUCH INTERFACE
Symbol
1 VBUS
1 VBUS 2 USB D3 USB D+ 4 NC 5 GND
USB TOUCH INTERFACE
2 TMDS Data2 Shield 3 TMDS Data24 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data17 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data010 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock13 CEC 14 Reserved 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect
1 TMDS Data2+
Symbol
HDMI INTERFACE
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
2EXTERNAL DIMENSIONS
2.1 Outline Drawing
www.surenoo.com
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
PIN
PIN
P IN
Display Type:
5.0”TFT+CTP+PCB
Driver IC:
–
Pixel Pitch:
Display Mode:
Operating Temperature:
-10 to +50
LCM Brightness:
Viewing Direction: (Gray inversion)
Storage Temperature:
-20 to +60
Backlight:
Display Resolution:
800(RGB)X480 pixels
Structure:
LCD+CTP+PCB
Ma terial Note:
THIS DRAWING IS PROPERTY OF SURNEOO TECHNOLOGY, IT CANNOT BE REPRODUCED WITHOUT PERMISSION.
0. 135mm X 0.135mm 350 cd/m^2
White LED(6X3) ROHS Request
MPN NO:
SHD050B-800480
Part NO:
MPI5001
APPD
Rev
V0
Unit: mm CHKD
Date: 2019-06-26 Scale 1:1
Unmarked Tolerance: ±0.20mm
DWN Sheet
Henry
Eric Jason
1 OF 1
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
2.2 Hardware Description
Model No.: SHD050B-800480
www.surenoo.com
P.05
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
3ABSOLUTE MAXIMUM RATINGS
Parameter of absolute
Symbol
Min
maximum ratings
Max
Unit
Operating temperature
Top
-20
70
Storage temperature
Tst
-30
80
Humidity
RH
–
90%(Max 60) RH
Note: Absolute maximum ratings means the product can withstand short-term, not more than
120 hours. If the product is a long time to withstand these conditions, the life time would be
shorter.
4ELECTRICAL CHARACTERISTICS(DC CHARACTERISTICS)
Parameter of DC characteristics
Symbol
Min.
Typ.
Max.
Unit
PCB operating voltage
VUSB
–
5.0
–
V
LCD I/O operating voltage VDD
3.0
3.3
3.6
V
Input voltage `H’ level
VIH
0.7*VDD
–
VDD
V
Input voltage `L’ level
VIL
VSS
–
0.3*VDD V
Output voltage `H’ level
VOH VDD-0.4
–
VDD
V
Output voltage `L’ level
VOL
VSS
–
VSS+0.4
V
www.surenoo.com
P.06
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
5CTP CHARACTERISTICS
Item of CTP characteristics
Specification
Panel Type
Glass Cover + Glass Sensor
Resolution
800 × 480
Surface Hardness
6H
Transparency
82%
Driver IC
–
Interface Type
USB
Support Points
5
Sampling Rate
20~100
Supply voltage
3.3
Model No.: SHD050B-800480
Unit
Remark
–
–
pixel
–
–
–
–
–
–
–
–
–
–
–
Hz
–
V
–
www.surenoo.com
P.07
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
6ELECTRO-OPTICAL CHARACTERISTICS
Item of
electro-optical Symbol Condition Min. Typ. Max. Unit Remark Note
characteristics
Response time Contrast Ratio
Tr+Tf CR
=0 =0
–
20
–
ms
FIG 1.
4
–
350
–
–
FIG 2.
1
Luminance uniformity WHITE Ta=25
–
80
–
%
FIG 2.
3
Surface Luminance
Lv
–
400
– cd/m2 FIG 2.
2
White x White White y
– 0.317 – 0.324 –
CIE (x, y) chromaticity
Red Green
Red x Red y Green x Green y
=0 =0
Ta=25
– 0.633 – 0.341 – 0.324 – 0.551 –
–
FIG 2.
5
Blue x Blue Blue y
– 0.153 – 0.143 –
=90(12 o’clock)
–
50
–
deg
Viewing =270(6 o’clock) angle range =0(3 o’clock)
CR t 10
–
60 65
–
deg deg
FIG 3.
6
=180(9 o’clock)
–
65
–
deg
NTSC ratio
–
–
–
50
–
%
–
–
Note 1. Contrast Ratio(CR) is defined mathematically by the following formula. For more
information see FIG 2.:
Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information see FIG 2.
Lv=Average Surface Luminance with all white pixels (P1,P2,P3,P4,P5,P6,P7,P8,P9) Note 3. The uniformity in surface luminance WHITEis determined by measuring
www.surenoo.com
P.08
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
luminance at each test position 1 through 9, and then dividing the maximum luminance of 9points luminance by minimum luminance of 9 points luminance. For more information see FIG 2.
Note 4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1. Note 5. CIE (x, y) chromaticity ,The x,y value is determined by screen active area position 5. For more information see FIG 2. Note 6. Viewing angle is the angle at which the contrast ratio is greater than a specific value. For TFT module, the specific value of contrast ratio is 10.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 3. Note 7. For Viewing angle and response time testing, the testing data is base on Autronic-Melchers’s ConoScope. Series Instruments. For contrast ratio, Surface Luminance, Luminance uniformity and CIEthe testing data is base on BM-7 photo detector. Note 8. For TN type TFT transmissive module, Gray scale reverse occurs in the direction of panel viewing angle. FIG.1. The definition of Response Time
www.surenoo.com
P.09
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
FIG.2. Measuring method for Contrast ratio, surface luminance, Luminance uniformity,
CIE (x , y) chromaticity
A : H/6 ; B : V/6 ; H,V : Active Area(AA) size Measurement instrument: BM-7; Light spot size=5mm, 350mm distance from the LCD surface to detector lens.
FIG.3. The definition of viewing angle
www.surenoo.com
P.10
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
7INTERFACE DESCRIPTION
AHDMI Interface Description
NO.
Symbol
DESCRIPTION
1
TMDS Data2+
Positive side of channel 2 TMDS low-voltage signal differential input pair
2
TMDS Data2 Shield
Ground
3
TMDS Data2-
Negative side of channel 2 TMDS low-voltage signal differential input pair
4
TMDS Data1+
Positive side of channel 1 TMDS low-voltage signal differential input pair
5
TMDS Data1 Shield
Ground
6
TMDS Data1-
Negative side of channel 1 TMDS low-voltage signal differential input pair
7
TMDS Data0+
Positive side of channel 0 TMDS low-voltage signal differential input pair
8
TMDS Data0 Shield
Ground
9
TMDS Data0-
Negative side of channel 0 TMDS low-voltage signal differential input pair
10
TMDS Clock+
Positive side of reference clock. TMDS low-voltage signal differential input pair
11
TMDS Clock Shield
Ground
12
TMDS Clock-
Negative side of reference clock. TMDS low-voltage signal differential input pair
13
CEC
No Connection
14
Reserved(N.C.)
No Connection
15
SCL
DDC SCL
16
SDA
DDC SDA
17
DDC/CEC Ground
Ground
18
+5V Power
+5V Power
19
Hot Plug Detect
Hot Plug Detect
BUSB Touch Interface Description
NO. Symbol
DESCRIPTION
1
VUSB
2
D-
3
D+
4
NC
5
GND
USB Power USB DataUSB Data+ No connection Power Ground
Application Note: Please connect the USB first, and then connect the HDMI interface.
www.surenoo.com
P.11
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
8LCD TIMING
Parallel RGB input Timing table
Parameter
DCLK frequency@ Frame rate=60Hz Horizontal display area 1 Horizontal Line HSYNC pulse width
HSYNC Back Porch(Blanking) HSYNC Front Porch Vertical display area VSYNC period time VSYNC pulse width
VSYNC Back Porch(Blanking) VSYNC Front Porch
Symbol
DCLK thd th thpw thb thfp tvd tv tvpw tvb tvfp
Min.
–
1 –
–
Value
Typ.
30 800 928 48 88 40 480 525 3 32 13
Max.
50
–
–
Unit
MHz DCLK DCLK DCLK DCLK DCLK
H H H H H
www.surenoo.com
P.12
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
9RELIABILITY TEST CONDITIONS
No.
Test Item
Test Condition
1 High Temperature Storage
80/120 hours
2
Low Temperature Storage
-30/120 hours
3 High Temperature Operating
70/120 hours
4 Low Temperature Operating
-20/120 hours
5 Temperature Cycle Storage -20(30min.)~25(5min.)~70(30min.)×10cycles
AInspection after test:
Inspection after 2~4 hours storage at room temperature, the sample shall be free from
defects:
¾ Air bubble in the LCD;
¾ Sealleak;
¾ Non-display; ¾ Missing segments;
¾ Glass crack; ¾ Current is twice higher than initial value.
BRemark:
¾ The test samples should be applied to only one test item.
¾ Sample size for each test item is 5~10pcs.
¾ Failure Judgment Criterion: Basic Specification, Electrical Characteristic, Mechanical
Characteristic, Optical Characteristic.
www.surenoo.com
P.13
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
10INSPECTION CRITERION
This specification is made to be used as the standard of acceptance/rejection criteria for TFT-LCD/IPS TFT-LCD module product, and this specification is applicable only in the case that the size of module equal to or exceed than 3.5 inch. 10.1 Sample plan Sampling plan according to GB/T2828.1-2003/ISO 2859-11999 and ANSI/ASQC Z1.4-1993,normal level 2 and based on: Major defect: AQL 0.65 Minor defect: AQL 1.5 10.2 Inspection condition Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of 20~40W light intensity, all directions for inspecting the sample should be within 45q against perpendicular line. (Normal temperature 20~25and normal humidity 60 r 15%RH ) 10.3 Definition of Inspection Item. ADefinition of inspection zone in LCD.
www.surenoo.com
P.14
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
Zone A: character/Digit area
Zone B: viewing area except Zone A (Zone A + Zone B=minimum Viewing area)
Zone C: Outside viewing area (invisible area after assembly in customer’s product)
Fig.1 Inspection zones in an LCD
Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for
quality and assembly of customer’s product. B Definition of some visual defect
Because of losing all or part function, bad pixel dots appear bright and the
Bright dot size is more than 50% of one dot in which LCD panel is displaying under
black pattern.
Dark dot
Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green, blue picture, or pure whiter picture.
10.4 Major Defect
Item
Items to be
No.
inspected
Inspection standard
Classification of defects
1) No display
2) Display abnormally
3) Missing vertical, horizontal segment
1
Functional defects 4) Short circuit
5) Excess power consumption 6)Backlight no lighting, flickering and abnormal
major
lighting
2
Missing
Missing component
3
Outline dimension
Overall outline dimension beyond the drawing is not allowed
www.surenoo.com
P.15
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
10.5 Minor Defect
Item No.
1
2
Items to be inspected
Bright dot /dark dot
defect
Inspection standard
Zone
Acceptable Qty
A+B
3.5″ 710.1″ 10.1″
C
7″
Bright pixel dot
1
2
3
Acceptable
Dark pixel dot
4
4
4
2bright dots adjacent
0
0
0
2dark dots adjacent
0
0
0
Total bright and dark
5
6
7
dots
Note: Minimum distance between defective dots is more than 5mm;
Pixel dots’ function is normal, but bright dots caused by foreign
material and other reasons are judged by the dot defect of 5.2.
Zone
Acceptable Qty
Size(mm)
0.2
A+B
3.5″7″
710.1″
10.1″
C
Acceptable Acceptable Acceptable
Classification of defects
Minor
Acceptable
0.20.5
4
5
6
0.5
0
0
0
Note: 1. Minimum distance between defective dots is more than 5 mm; 2. The quantity of defect is zero in operating condition.
Minor
Zone
Acceptable Qty
Size (mm)
A+B
3
Linear
Length Width 3.5″7″ 710.1″
10.1″
C
Minor
defect
Ignore W0.05 Acceptable Acceptable Acceptable
Acceptable
L5.0
0.05 W0.1
4
5
6
L5.0 W0.1
0
0
0
www.surenoo.com
P.16
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
5.4.1 Polarizer Position
( i) Shifting in position should not exceed the glass outline
dimension.
( ii ) Incomplete covering of the viewing area due to shifting is not
allowed.
5.4.2 Dirt on polarizer
Dirt which can be wiped easily should be acceptable.
5.4.3 Polarizer Dent & Air bubble
Zone
Acceptable Qty
A+B
Size(mm)
3.5″7″
710.1″
10.1″
C
0.2
Acceptable Acceptable Acceptable
Acceptable
0.20.5
4
5
6
4
Polarizer defect
0.5
0
5.4.4 Polarizer scratch
0
0
Minor
(i) If the polarizer scratch can be seen after cover assembling
or in the operating condition, judge by the linear defect of 5.3.
( ii )If the polarizer scratch can be seen only in non-operating
condition or some special angle, judge by the following:
Zone
Acceptable Qty
Size (mm)
A+B
Length Width 3.5″7″ 710.1″
10.1″
C
Acceptable
Ignore
1.0L 5.0 L5.0
W0.05 0.05 W0.20 W0.2
Acceptable
4 0
Acceptable
5 0
Acceptable
6 0
MURA
Using 3% ND filter, it’s NG if it can be seen in R,G,B picture.
5
White/Black dotMURA
Visible underND3%D0.15mm, Acceptable 0.15mm<D0.5mm, N4D>0.5mm, Not allowable.
Minor
www.surenoo.com
P.17
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
(i) Crack Cracks are not allowed.
(ii) TFT chips on corner
Model No.: SHD050B-800480
Minor
Minor
6
Glass defect
X 3.0
Y 3.0
Z Not more than the thickness of glass
Acceptable N3
Chips on the corner of terminal shall not be allowed to extend
into the ITO pad or expose perimeter seal.
(iii) Usual surface crack
X
Y
Z
Acceptable
1.5
1.5
Not more than the thickness of glass
N4
It is only applicable to the upper glass of LCD.
Minor
www.surenoo.com
P.18
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
Model No.: SHD050B-800480
10.6 Module Cosmetic Criteria
Item No.
1 2
3
4 5 6
7
8 9 10
Items to be inspected
Difference in Spec. Pattern peeling
Soldering defects
Resist flaw on PCB FPC gold finger Backlight plastic frame
Marking printing effect Accretion of metallic Foreign matter Stain Plate discoloring
Inspection Standard
Not allowable No substrate pattern peeling and floating No soldering missing No soldering bridge No cold soldering Visible copper foil (0.5 mm or more) on substrate pattern is not allowed No dirt, breaking, oxidation lead to black No deformation, crack, breaking, backlight positioning column breaking, obvious nick. No dark marking, incomplete, deformation lead to unable to judge
No accretion of metallic foreign matter (Not exceed 0.2mm)
No stain to spoil cosmetic badly No plate fading, rusting and discoloring
Classification of defects
Major Major Major Major Minor
Minor
Major
Minor
Minor
Minor
Minor Minor
1. Lead parts
a. Soldering side of PCB Solder to form a `Filet’ all around the lead. Solder should not hide the lead form perfectly.
b. Components side(In case of `Through Hole PCB’) Solder to reach the Components side of PCB.
Minor Minor
2. Flat packages
Either `Toe'(A) or `Seal'(B)of the lead to be covered by “Filet”. Lead form to be assume over Solder.
Minor
11 3. Chips
(3/2) H h (1/2) H
4. Solder ball/Solder splash
a. The spacing between solder ball and the conductor or solder pad h 0.13 mm. The diameter of solder ball d0.15 mm. b. The quantity of solder balls or solder splashes isn’t beyond 5 in 600 mm2.
c. Solder balls/Solder splashes do not violate minimum electrical clearance.
www.surenoo.com
Minor Minor Minor Major
P.19
SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
11PRODUCT PHOTOS PRODUCT
Model No.: SHD050B-800480
www.surenoo.com
P.20
Documents / Resources
 | Surenoo SHD050B-800480 HDMI Display Module [pdf] User Manual SHD050B-800480 HDMI Display Module, SHD050B-800480, HDMI Display Module, Display Module, HDMI Display |