SUPERLIGHTINGLED SR-2102HT High Voltage RGB LED Strip DMX Controller

Product Information

Product Specifications

• Product Name: High Volt DC100~240V LED Strip DMX Controller
• Model Number: 09.212HS.04264
• Input Voltage: AC 100-240V
• Output Voltage: DC 100-240V
• Output Current: Max 3×1.66A
• Max Load: 500W @110V, 1000W @240V
• Size (LxWxH): 170x59x29mm

Product Usage Instructions

Mode Selection
To choose the mode:

1. Hold buttons 1 & 2 together until the digital display flashes.
2. Click button 3 to select between DMX Master mode or DMX Decoder mode.
3. After selecting the mode, hold any one button to confirm the setting.

Setting DMX Decoder Address
If in DMX Decoder mode:

1. Hold any one of the buttons until the display flashes.
2. Use the buttons to set the DMX address.
3. Hold any one button to confirm the setting.

Setting DMX Channels
If in DMX Decoder mode:

1. Hold buttons 2 & 3 together until the display flashes.
2. Click button 1 to choose between occupying 1 or 3 DMX channels.
3. Hold any one button to confirm the setting.

Master Mode Instructions

1. All connected DMX decoders should be set to address 001.
2. Once in DMX Master mode, adjust programs, brightness, and speed using the buttons.
3. To adjust programs, brightness, and speed, follow the instructions provided in the manual.

Frequently Asked Questions (FAQ)

• Q: What is the default setting of the controller?
  A: The default setting is DMX Decoder mode ru2 with 3 channels occupied.
• Q: How do I wire the controller in DMX Master mode?
  A: Refer to the wiring diagram provided in the manual for proper wiring instructions when using DMX Master mode.

Important: Read All Instructions Prior to Installation

Function introduction

Product Data

• Safe and reliable full isolation design
• Output for high voltage DC100~240V LED Strip (RGB or Mono)
• With both Master / Decoder functions switchable.
• Waterproof IP grade IP20
• High-temperature-resistant address digital display.

Safety & Warnings

• DO NOT install with power applied to the device.
• DO NOT expose the device to moisture.

Operation

• A. Choose mode
  • Hold buttons 1 & 2 together until the digital display flashes, click button 3 to choose 1 or 2.
  • is DMX Master mode, is DMX Decoder mode.
  • After choosing ru1 or ru2, then hold any one button to confirm the setting.
• B. Set DMX Decoder Address
  If the controller at DMX Decoder mode, you need to set the DMX address by holding any one of the buttons until the display flashes, then click the buttons to set the address, then hold any one button to confirm the setting.
• C. Set DMX Channels
  • After setting the controller at DMX Decoder mode, you can set the DMX channels by holding buttons 2 & 3 together until the display flashes, then click button 1 to choose 1 or 3, then hold any one button to confirm the setting.
  • means the decoder occupies 3 dmx addresses, usually for RGB LED strips.
  • means the decoder occupies 1 dmx address, usually for the mono LED strip.

Note: the factory default setting is DMX Decoder mode ru2, 3cH

Instruction for Master mode

Instruction for Master mode

1. All the connected DMX decoders should be addressed 001 only.
2. After setting the controller to DMX Master mode, you can adjust its programs, brightness, and speed.
3. Keep on clicking button 1 you can get P, 5, 6, and CP means program, keep on clicking button 3, to play 10 running programs.
   • 5 means speed, keep on clicking button 3, to adjust the speed of running programs.
   • 6 From 5-1 to 5-1, speed turns slower and slower 6 means brightness, keep on clicking button 3, to get 8 levels of brightness.
   • From 6-1 to +-8, brightness turns more and more c means color, keep on clicking button 3, to get a total 9 static colors.

Wiring Diagram

Wiring as DMX Decoder Mode

Wiring as DMX Master Mode

Documents / Resources

SUPERLIGHTINGLED SR-2102HT High Voltage RGB LED Strip DMX Controller [pdf] Instructions SR-2102HT, SR-2102HT High Voltage RGB LED Strip DMX Controller, High Voltage RGB LED Strip DMX Controller, RGB LED Strip DMX Controller, LED Strip DMX Controller, Strip DMX Controller, DMX Controller, Controller

References

• User Manual