SUNFORCE logo

SUNFORCE 82102 100 LED Solar Motion Activated Light

SUNFORCE 82102 100 LED Solar Motion Activated Light featured

Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
If at any time you are unclear about this product, or require further assistance please do not hesitate to contact our trained professionals operating the customer support line at 1-888-478-6435 (English/French/ Spanish language services, U.S.A. and Canada only), from Monday to Friday, 8:30 am to 5:00 pm Eastern Standard Time or email us at
[email protected]

Safety information

  • Your motion light is not a toy. Keep it out of reach of small children.
  • Your motion light and solar panel are both weather-resistant.
  • You can mount your motion light indoors, but your solar panel must be installed outdoors to receive light from the sun.
  • If using a step ladder, you may require a second person to help install the solar motion light.
  • Prior to installation, lay out all components to ensure they correspond to the parts diagram on the cover page.
  • Never look directly into the solar motion light when illuminated.

BATTERY REPLACEMENT INSTRUCTIONS

When replacing the batteries, be sure to:

  • Use rechargeable batteries only.
  • Match the replacement battery specifications with the batteries that have been removed.
  • Observe the correct polarity (+ and -) when installing the replacement batteries.
  • Replace the whole set of batteries at one time. Do not combine old and new batteries together or those with different specifications.

Care & Maintenance

  • From time to time, ensure the plug between the solar panel and light is securely connected.
  • It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the winter months.
  • The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal performance and battery charging. Periodically, utilize the same technique to clean the lens of the motion light.
  • Never let any abrasive material come into contact with the solar panel.

Product features

  • 100 white LEDs
  • Solar panel with 4.5 m / 15 ft wire
  • Adjustable motion sensor
  • Adjustable time and distance settings

Warranty

This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase. The included batteries are not covered under this warranty. Proof of purchase including date, and explanation of complaint is required for warranty service.

Installation

  1. Ensure your solar panel is placed so that its exposure to the sun is optimized. Be aware of objects such as trees or property overhangs that may impede the panel’s ability to generate a charge.instruction 1
  2. Optional: Use a power drill (not included) to create the holes on your chosen mounting surface. Use 4 of the included wall plugs and screws to fasten the solar panel to the surface.
  3. Remove the mounting bracket from the solar motion light by unscrewing the side bolts.instruction 2
  4. Optional: Use a power drill (not included) to create the holes on your chosen mounting surface. Fasten the mounting bracket to your chosen surface with the 2 remaining wall plugs and screws.instruction 3
  5. Reattach the mounting bracket to the light and tighten the side bolts (refer to the illustration in Step 3).instruction 4instruction 5

Frequently asked questions

  1. Where should the solar panel be mounted?
    • Mount your solar panel in a position that will enable the most amount of light to be absorbed (refer to Step 1 on page 2). In the Northern Hemisphere this is usually south facing.
  2. Does the solar panel require direct sun to charge?
    • The solar panel can charge the internal batteries in direct and indirect light. For best results, try to optimize your solar panel’s sun exposure.
  3. Can additional or extended cable wire for the solar panel be purchased?
    • At this point there are no extensions available for the cable that connects the light to the solar panel. Any additions to the cable will void the warranty.
  4. Why does the solar motion light appear to “strobe” or flash?
    • A rapidly flashing light is caused by undercharged batteries. Turn the solar motion light to the “OFF” position and charge for two full sunny days to bring the batteries to full charge.
  5. Will decorative or street lights have an effect on the motion sensor’s ability to operate?
    • Yes, the sensor of the solar motion light is light-sensitive. For nighttime usage, ensure no other light activates the motion sensor.
  6. What type of battery does my solar motion light require to operate?
    • Yes, the sensor of the solar motion light is light-sensitive. For nighttime usage, ensure no other light activates the motion sensor.

Documents / Resources

SUNFORCE 82102 100 LED Solar Motion Activated Light [pdf] Installation Guide
82102, 100 LED Solar Motion Activated Light, 82102 100 LED Solar Motion Activated Light, Motion Activated Light, Activated Light

Leave a comment

Your email address will not be published.