Gagasan 2.1 Saluran Soundbar sareng Manual Pamaké Subwoofer Nirkabel

2.1 Saluran Soundbar sareng Subwoofer Nirkabel
LIVE2 USER MANUAL

Sadaya pitunjuk kaamanan sareng operasi kedah dibaca tuntas sateuacan dilanjutkeun sareng punten jaga buku panduan kanggo rujukan payun.

BUBUKA

Thank you for purchasing the iDeaPlay Soundbar Live2 system, We urge you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions to help you set up and get started. All safety and operation instructions should be read throughly before proceeding and please keep this brochure for future reference.

TAROS KAMI:
If you have any questions about iDeaPlay Soundbar Live2 system, its installation or its operation, please contact your retailer or custom installer, or send us a
surélék: support@ideausa.com
Bébas bébas Tol: 1-866-886-6878

NAON DI KOTAK

CONNECT SOUNDBAR AND SUBWOOFER

1. Placing the Soundbar
   
2. Nempatkeun Subwoofer
   

PUNTEN CATET:
It is recommended to use cable connection between the soundbar host and the TV, (using Bluetooth connection for TV may cause to sound quality pressure loss) The soundbar host must be used together with subwoofer and surround sound box.

HOW TO CONNECT SOUNDBAR TO YOUR DEVICES

4a. Connecting the Soundbar to Your TV
Sambungkeun soundbar anjeun kana TV. Anjeun tiasa ngupingkeun audio tina program TV ngalangkungan soundbar anjeun.

Connecting to TV Through AUX Audio Cable or COX Cable.
The AUX Audio Cable connection supports digital audio and is the best option to connect to your soundbar.
You can hear the TV audio through your soundbar by using a single AUX Audio Cable.

1. Connect to TV Through AUX Audio Cable
   
2. Connect to TV Through COX Cable
   Connecting to TV Through Optical Cable
   Sambungan optik ngadukung audio digital sareng mangrupikeun alternatif pikeun sambungan audio HDMI. Sambungan audio optik ilaharna tiasa dianggo upami sadaya alat pidéo anjeun nyambung langsung kana tipi – henteu ngalangkungan inputbar HDMI input.
3. Connect to TV Through Optical Cable
   

PUNTEN CATET:
Konpirmasi pikeun nyetél setélan audio TV anjeun pikeun ngadukung "spéker éksternal" sareng nganonaktipkeun speaker TV internal.

4b. Connect to Other Devices Through Optical Cable
Using an optical cable, connect the optical port on your soundBar to the optical connectors on your devices.

4c. How to Use Bluetooth

Step1: 
Enter pairing mode: Turn on the Soundbar.
Press Bluetooth (BT) button on your remote control to start Bluetooth pairing.
The “BT” icon will flash slowly on the screen indicating the Live2 has entered pairing mode.

Step2:
Search for “iDeaPLAY LIVE2” on your devices and then pair. Live2 will make an audible beep and the BT icon illuminate, indicates the connection is complete.

PUNTEN CATET:
Press “BT” button for three seconds to disconnect the Bluetooth device connected to the audio and enter the reconnection status.

Bluetooth Troubleshoots

1. If you cannot find or pair to the Live2 via BT, unplug the Live2 from the power outlet, then 5 seconds later plug it again and connect by following the instructions above.
2. A previously paired device will automatically reconnect if it hasn’t been unpaired. Need to search and pair manually for the first time use or reconnect after unpaired.
3. The Live2 can only pair to one device one time. If you cannot pair your device, please check that no other device is already paired with the Live2.
4. BT connection range: Surrounding objects can block BT signals; maintain a clear line of sight between the soundbar and the paired device, household appliances, such as smart air cleaners, WIFI routers, induction cookers, and microwave ovens can also cause radio interference that reduces or prevent pairing.

NGAGUNAKEUN SISTEM SOUNDBAR Anjeun

5a. Soundbar Top Panel & Remote Control
Soundbar Top Panel

1. Pangaluyuan Volume
2. Power Button It takes 3 seconds to turn on / off the Soundbar
3. Sound Source Selection Touch the icon, the corresponding icon “BT, AUX, OPT, COX, USB” in the front display area will light up accordingly, indicating that the corresponding input sound source on the backplane has entered the working status.
4. Sound Mode Adjustment
5. Sateuacanna / Teras
6. Pause / Play / Mute Button
7. Installing Remote Batteries Insert the provided AAA batteries.

5b. LED Display

1. Temporary Display of Volume and Sound Source:
   1. The maximum volume is 30, and 18-20 is suitable for normal use.
   2. Temporary display of sound source: select sound source through touch screen or remote control. The corresponding source is shown here for 3 seconds and then returns to the volume number.
2. Sound Effect Display: Press the “EQ” button on the remote control to change the sound mode.
   MUS: Music mode
   NEWS: News mode
   MOV: Movie mode
3. Sound Source Display: Select on touch screen or by remote control, the mode will light up according on the screen.
   BT: Corresponding to Bluetooth.
   AUX: Corresponding to aux input on the backplane.
   OPT: Corresponding to optical fiber input on backplane.
   COX: Corresponding to coaxial input on backplane.
   USB: When the USB key is pressed on the remote control or the touch screen is switched to USB mode, USB will be displayed in the volume area.

5c. Soundbar Back Panel

1. USB Input Port:
   Automatically recognize and play from the first song after inserting USB flash disk. (Cannot select folder to play).
2. AUX Input Port:
   Connect with 1-2 audio cable and connected with red/white output port of sound source device.
3. Coaxial Port:
   Connect with coaxial line and connected with coaxial output port of sound source device.
4. Optical Fiber Port:
   Connect with optical fiber cable and connected with optical fiber output port of sound source device.
5. Palabuhan Daya:
   Connect to household power supply.

5d. Subwoofer Back Panel Area and Indicator Light

MODÉ STANDI

1. Automatic standby When the device has no signal input for 15 minutes (Such as TV shutdown, movie pause, music pause, etc.), Live2 will automatically stand by. Then you will need to switch on the soundbar manually or by remote control.
2. In automatic standby mode, the customer can also remotely control by the remote control and Live2 panel buttons.
3. The auto standby function is the default and cannot be turned off.

spésifikasi produk

model	Live2	palabuhan	Bluetooth, Coaxial, Optical Fber,3.Smm, USB Input
ukuran	Soundbar: 35×3.8×2.4 inch  (894x98x61mm) Subwoofer: 9.2×9.2×15.3 inch (236x236x39mm)	Pasokan Daya Input	AC 120V / 60Hz
Unit Spéker	Soundbar: 0.75 inch x 4 Tweeter 3 inch x 4 Full Range Subwoofer: 6.5 inch x 1 Bass	Beurat bersih:	Soundbar: 6.771bs(3.075kg) Subwoofer: 11.1lbs(5.05kg)
Total RMS	120W

pangrojong customer

Kanggo dukungan atanapi koméntar ngeunaan produk kami, punten kirimkeun email ka: Support@ideausa.com
Bébas bébas Tol: 1-866-886-6878
Alamat: 13620 Benson Ave. Suite B, Chino, CA 91710 Websitus: www.ideausa.com

Pernyataan FCC

Alat ieu saluyu sareng bagian 15 tina Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) Alat ieu teu tiasa nyababkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan naon waé, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.
Sagala Parobihan atanapi modifikasi anu henteu sacara jelas disatujuan ku pihak anu tanggung jawab pikeun matuh tiasa ngabatalkeun wewenang pangguna pikeun ngoperasikeun pakakasna.
Catetan: Alat ieu geus diuji sarta kapanggih matuh ka wates pikeun alat digital Kelas B, nurutkeun kana bagian 15 tina Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun kagunaan sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong nyobian ngabenerkeun gangguan ku hiji atanapi langkung tina ukuran ieu:

• Nganyahokeun atanapi mindahkeun anteneu anu nampi.
• Ningkatkeun pamisahan antara alat sareng panarima.
• Sambungkeun alatna kana outlet dina sirkuit anu bénten-bénten ti anu mana panarima nyambung.
• Taroskeun ka dealer atanapi téknisi radio / TV anu ngalaman pikeun pitulung.

* Peringatan RF pikeun alat Mobile:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This ode should be installed and operated with minimum distance 20cm between the radiator & your body.

Live2lI2OUMEN-02

Dokumén / Sumberdaya

Idea 2.1 Channel Soundbar with Wireless Subwoofer [pdf] Buku Panduan 2.1 Channel Soundbar with Wireless Subwoofer, Channel Soundbar with Wireless Subwoofer, Wireless Subwoofer

Rujukan

• Manual pamaké