Da Rings V6PRO Smart Ring User Manual

Da-Rings-logo

Da Rings V6PRO Smart Ring

Da-Rings-V6PRO-Smart-Ring-product

Product Overview

The Da Rings V6PRO is a multifunctional smart ring designed to track health, notifications, and fitness data seamlessly.

Key Features:

  • Health monitoring: Heart rate, SpO₂, sleep, and activity tracking
  • Notifications: Calls, messages, app alerts
  • Fitness tracking: Steps, calories, distance, and exercise modes
  • Battery: Long-lasting rechargeable battery
  • Compatibility: Android and iOS devices via companion app

Health and Safety Precautions

  • Medical Conditions: Not intended to replace professional medical devices. Consult a doctor if you have health concerns.
  • Water Resistance: Avoid wearing in hot showers or saunas; not fully waterproof.
  • Skin Safety: Remove the ring if skin irritation occurs.
  • Charging Safety: Use only the provided charging cable. Avoid charging near water..

Getting Started

Charging the Ring

  1. Connect the magnetic charging cable to the ring.
  2. Plug the USB end into a power adapter or computer.
  3. Fully charge before first use (approx. 60–90 minutes).

Installing the App

  1. Download the Da Rings App from Google Play Store or Apple App Store.
  2. Create an account or log in.
  3. Pair the ring via Bluetooth:
    • Turn on Bluetooth on your smartphone.
    • Open the app and follow the pairing instructions.

Wearing the Ring

  • Wear the ring on your finger comfortably but snugly for accurate readings.
  • Ensure the sensor is in full contact with your skin.

Operation

Basic Controls

Action Gesture / Button
Wake / Screen On Tap the ring
Check Time Swipe on display (if touchscreen) or tap
Start Activity Tap & hold / Use app control
Return to Home Tap / Double-tap (if supported)

Health Monitoring

  • Heart Rate: Automatic continuous monitoring or on-demand in the app.
  • SpO₂: Measure blood oxygen levels via sensor.
  • Sleep Tracking: Automatically tracks sleep patterns.
  • Fitness Data: Steps, distance, calories automatically recorded.

Notifications

  • Incoming call, message, or app alert vibrations and screen display.
  • Manage notification settings through the app.

Firmware Updates

  • Keep the ring firmware up-to-date via the app for optimal performance.
  • Ensure the ring is charged and Bluetooth is active during updates.

Troubleshooting

Issue Solution
Ring not pairing Turn Bluetooth off/on, restart phone, re-pair via app
Data not syncing Check app permissions and connectivity
Ring not charging Ensure proper contact with magnetic charger, try another USB port
Screen unresponsive Reset ring via app or hold button (if available)
Loading PDF…
Download PDF

Component List

Da-Rings-V6PRO-Smart-Ring-fig- (1)

Power On
Connect the charging cable to power on the smart ring

Connection APP

ISearch and dovmtoad Da Rings APP. or scan the QR code on the right to select the appropriate APP version to download.
2.0pen the app and follow the instructions to match the ring.

Lighting status

Da-Rings-V6PRO-Smart-Ring-fig- (3)charging and turns Off when
Cashz dunno me heart rate test and the ±zinq the crjgen tmt

Wearing style
Wear the ring on your own suitable finger. choose a comfortable size and wear it on the index finger. middle finger. and nng finger to better monitor the data.

Charging

Da-Rings-V6PRO-Smart-Ring-fig- (2)

Connect the charging cable to power on the smart ring

Documents / Resources

PDF thumbnailV6PRO Smart Ring
User Manual · S32d6487c4ec5429faaaaf8162ae045c1T, V6PRO Smart Ring, V6PRO, Smart Ring, Ring

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Ring only charges to 5%

    🇺🇸 Anonymous asks Ring only charges to 5%
    Manuals+ clarified question
    Question

    Why is my Da Rings V6PRO Smart Ring only charging to 5%?

    Answer

    If your Da Rings V6PRO is failing to charge beyond 5%, please try the following troubleshooting steps based on the manual's charging instructions:

    • Check the Connection: Ensure the charging cable is securely connected to the charging port on the inner side of the ring. The manual indicates that the red light should flash while charging and turn off once fully charged.
    • Clean the Contacts: Gently clean the charging port on the ring and the pins on the charging cable with a dry cloth or a cotton swab dipped in a small amount of rubbing alcohol to ensure a good electrical connection.
    • Power Source: Try using a different USB power adapter or a different USB port on a computer to rule out a faulty power source.
    • Safety Check: Ensure the charging environment is dry. The manual warns against touching the charging cable with wet hands or allowing it to come into contact with liquids.

    If the ring continues to stop at 5% after these steps, the battery or the charging cable may be defective, and you should contact the manufacturer or your point of purchase for a replacement.

  2. I can’t update my profile. I just downloaded the app and it’s not allowing me to change anything

    🇺🇸 Celeste asks I can’t update my profile. I just downloaded the app and it’s not allowing me to change anything
    Manuals+ clarified question
    Question

    How do I update my profile in the Da Rings app?

    Answer

    The provided manual for the Da Rings V6PRO focuses primarily on hardware setup and initial app pairing. It does not contain specific troubleshooting steps for profile editing within the app. However, based on standard smart ring app procedures, please try the following:

    • Complete Pairing First: Ensure your ring is fully paired with the app. According to the manual, you must scan the QR code to download the Da Rings app, open it, and follow the instructions to match the ring before all features become accessible.
    • Check Permissions: Ensure the app has all requested permissions (Bluetooth, Storage, etc.) enabled in your smartphone's settings.
    • Save Button: Look for a 'Save', 'Done', or 'Checkmark' icon in the top right corner of the profile screen, as some apps require a manual save action before changes are applied.
    • Re-login: Try logging out and back into the app to refresh your user data.

    If the issue persists, you may need to contact the app developer directly through the support link in the App Store or Google Play Store, as this appears to be a software-specific limitation not covered in the hardware manual.

  3. my DA Ring pares when in charging mode but not when disconnected.

    🇺🇸 Sharon Schmidt asks my DA Ring pares when in charging mode but not when disconnected.
    Manuals+ clarified question
    Question

    Why does my DA Ring V6PRO only pair while charging and not when disconnected?

    Answer

    Based on the manual for the Da Rings V6PRO Smart Ring, the device is designed to power on specifically when the charging cable is connected (as shown on page 2). If the ring loses its connection or fails to pair as soon as it is disconnected from the charger, please check the following:

    • Battery Level: Ensure the ring is fully charged. According to the "Lighting status" section, the red light flashes during charging and turns off once the device is fully charged. If the battery is defective or not holding a charge, it may lose power immediately upon disconnection.
    • Initial Setup: The manual indicates that connecting the charging cable is the method to "power on" the ring. If the ring does not stay powered on after removal, it may indicate a hardware fault with the internal battery.
    • App Connection: Ensure you are using the official Da Rings APP and that your phone's Bluetooth remains active after you unplug the ring.

    If the ring continues to shut down or disconnect immediately after being removed from the charger despite showing a full charge, the internal battery may be unable to sustain the connection, and you should contact the manufacturer for a replacement.

    Note: The manual does not list a separate physical power button; the charging connection serves as the primary power-on trigger.

  4. How do I unlock my v ring from a wirkout

    🇺🇸 Anonymous asks How do I unlock my v ring from a wirkout
    Manuals+ clarified question
    Question

    How do I end or unlock a workout session on the Da Rings V6PRO?

    Answer

    Based on the available manual for the Da Rings V6PRO, the ring itself does not have physical buttons or a screen to toggle modes. All workout controls and data management are handled through the Da Rings app.

    To end or "unlock" a workout session, please follow these steps in the app on your smartphone:

    • Open the Da Rings app.
    • Navigate to the active workout or exercise tracking screen.
    • Look for a Stop or End button (often represented by a square icon).
    • If the app screen is locked, you may need to long-press the stop button or slide a toggle to confirm you want to finish the session.

    If the ring appears unresponsive, ensure it is properly connected via Bluetooth within the app. If you are unable to stop the workout via the app, try placing the ring back on its charging cable to reset its current state.

  5. For What is the white charging cord included with the C end and the larger plug in end like for a computer port that was included? It can’t be for the ring’s box because the C end doesn’t fit into it. Finally figured out how the charge the ring so it is plugged in now, so waiting to continue. I don’t see anything about the white other cord. Is the box a charger of some kind or just a recepticle to place the ring?

    🇺🇸 Colleen asks For What is the white charging cord included with the C end and the larger plug in end like for a computer port that was included? It can't be for the ring's box because the C end doesn't fit into it. Finally figured out how the charge the ring so it is plugged in now, so waiting to continue. I don't see anything about the white other cord. Is the box a charger of some kind or just a recepticle to place the ring?
    Manuals+ clarified question
    Question

    What is the purpose of the included white USB-C cable, and is the ring box a charger?

    Answer

    Based on the V6PRO Smart Ring manual, here is the clarification regarding your charging components:

    • The White Cable: The manual lists a "Charging cable" in the packing list. If the USB-C end does not fit the ring's storage box, it is likely intended to connect directly to the Charging port located on the inner band of the ring itself (as shown in the 'Component Description' on page 1). The larger USB-A end connects to a standard power source like a computer port or a wall adapter.
    • The Box: The manual does not describe the storage box as a charging dock or power bank. It appears to be a protective receptacle for the ring. The ring is powered on and charged by connecting the charging cable directly to the contact points on the ring's interior.

    Charging Indicators: When successfully connected, the red light will flash while charging and turn off once the ring is fully charged.

    Note: If you have a cable that does not fit either the ring or the box, please verify if it was intended for a different device, as the manual only specifies one charging cable for the ring's internal port.

  6. Why would my ring not be syncing the O2 data at night (only allows me to do it manually)? Also there is no temperature reading at all? iPhone 12ProMax

    🇺🇸 Anonymous asks Why would my ring not be syncing the O2 data at night (only allows me to do it manually)? Also there is no temperature reading at all? iPhone 12ProMax
    Manuals+ clarified question
    Question

    Why is my Da Rings V6PRO not syncing O2 data automatically at night, and why is there no temperature reading?

    Answer

    Based on the Da Rings V6PRO Smart Ring manual, here are the steps to address your concerns:

    • O2 Data Syncing: The manual indicates that the red light flashes during the blood oxygen test. For automatic overnight monitoring, ensure the ring is worn correctly on the index, middle, or ring finger with the sensor positioned on the inside of your finger. If data only appears manually, check the Da Rings app settings to ensure "Automatic Health Monitoring" or a similar sleep-tracking toggle is enabled.
    • Temperature Readings: The provided manual documentation for the V6PRO specifically identifies sensors for Oxygen and Heart Rate (page 1, Component Description). It does not list a skin temperature sensor in the hardware specifications or component list. If the app shows a temperature field that remains empty, it is likely that this specific model (V6PRO) does not support hardware-based temperature tracking.
    • Connection Check: Since you are using an iPhone 12 Pro Max, ensure the app has all permissions allowed in your iOS settings (Bluetooth, Background App Refresh, and HealthKit integration) to allow the ring to sync data while you sleep.

    If the issue persists, try unpairing and re-pairing the ring through the Da Rings app as shown on page 3 of the manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.