DMS Recessed Shutter Winder (Model AVVSEM6)

1. Produk Langkungview

The DMS Recessed Shutter Winder (Model AVVSEM6) is designed for operating roller shutters and window blinds. This unit features a robust construction with a reinforced spring mechanism, ensuring reliable performance. It is supplied with a black cover plate for a clean, integrated appearance. The winder is designed for recessed installation, providing a discreet solution for your window treatments.

• Konstruksi anu kuat: Engineered for durability and long-term use.
• Reinforced Spring: Provides consistent and smooth operation.
• Black Cover Plate: Included for a finished, aesthetic installation.
• 6-Meter Tape Capacity: Suitable for various window sizes.

Image 1.1: The DMS Recessed Shutter Winder with its accompanying black cover plate, shown separated. The winder mechanism is made of galvanized metal, and the plate is black plastic.

2. Émbaran Kasalametan

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in injury or product damage.

• Salawasna nganggo alat pelindung pribadi (PPE) anu cocog sapertos sarung tangan sareng panyalindungan panon nalika dipasang.
• Ensure the installation area is clear of obstructions and electrical wiring.
• Do not attempt to modify the product. Any modifications will void the warranty and may compromise safety.
• Jauhkeun barudak sareng piaraan ti daérah pamasangan.
• Ensure all fasteners are securely tightened to prevent the winder from detaching.

3. Eusi Paket

Pastikeun yén sadaya komponén aya sareng henteu ruksak sateuacan neraskeun pamasangan.

• 1x Recessed Shutter Winder mechanism (with 6-meter tape)
• 1x Black Cover Plate

Image 3.1: The main components of the DMS Recessed Shutter Winder: the metal winder mechanism and the black plastic cover plate, laid out separately.

4. Spésifikasi

Detailed technical specifications for the DMS Recessed Shutter Winder.

Image 4.1: Detailed dimensions of the DMS Recessed Shutter Winder and its black cover plate. Key measurements include total height, fixing hole distance, winder depth, and cover plate dimensions.

5. Setup jeung Instalasi

Follow these steps for proper installation of the recessed shutter winder.

1. Nyiapkeun bubuka: Ensure the recessed opening in your wall or window frame is appropriately sized for the winder mechanism. Refer to the specifications for exact dimensions.
2. Attach the Shutter Tape: If not already attached, feed the shutter tape from your roller shutter through the winder mechanism and secure it according to the shutter system's instructions. Ensure the tape is correctly wound onto the winder's spool.
3. Position the Winder: Insert the winder mechanism into the prepared recessed opening. Align the fixing holes on the winder with the pre-drilled holes in the frame or wall.
4. Amankeun Winder: Use appropriate screws (not included) to firmly attach the winder mechanism to the wall or frame. Ensure it is level and securely fastened to prevent movement during operation.
5. Install the Cover Plate: Place the black cover plate over the installed winder mechanism. Align the holes on the cover plate with the corresponding holes on the winder or frame. Secure the cover plate using small screws (not included) to complete the installation.

Image 5.1: The DMS Recessed Shutter Winder with the black cover plate correctly installed, showing the integrated appearance.

Gambar 5.2: Hiji internal view illustrating how the shutter tape is wound around the winder's spool, highlighting the tape path and mechanism.

6. Parentah Operasi

To operate your roller shutter or window blind using the DMS Recessed Shutter Winder:

• To Lower the Shutter: Gently pull the tape downwards. The winder's internal spring mechanism will allow the tape to unwind, lowering the shutter. Control the speed of descent by maintaining a firm grip on the tape.
• To Raise the Shutter: Gently pull the tape upwards. The winder's spring will assist in retracting the tape, raising the shutter. Guide the tape smoothly to avoid sudden movements.
• Mékanisme ngonci: Some roller shutters have a built-in locking mechanism. Ensure the shutter is fully raised or lowered before engaging any such lock. The winder itself does not feature a locking mechanism; the shutter's position is maintained by the tension of the tape and the shutter's own design.

7. Pangropéa

The DMS Recessed Shutter Winder requires minimal maintenance to ensure long-lasting performance.

• beberesih: Periodically wipe the visible parts of the winder and cover plate with a soft, damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif, sabab ieu tiasa ngaruksak lapisan akhir.
• Pamariksaan: Regularly inspect the shutter tape for any signs of wear, fraying, or damage. If the tape is damaged, it should be replaced by a qualified professional to prevent operational issues.
• Lubrication: The internal mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble the winder, as this may impair its function and void the warranty.

8. Cara ngungkulan

If you encounter issues with your DMS Recessed Shutter Winder, refer to the following common problems and solutions:

9. Garansi jeung Rojongan

DMS products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to the DMS customer service department through the contact information provided on the product packaging or the official DMS websitus.