VEVOR Demolition Jack Hammer

1. Bubuka

Thank you for choosing the VEVOR Demolition Jack Hammer. This powerful electric jackhammer (Model JH-65) is designed for heavy-duty demolition tasks, including breaking concrete, chipping, and other demanding applications. With its 2200W motor and 1350 BPM impact rate, it provides efficient and precise performance for professional use. This manual provides essential information for safe operation, proper setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Figure 1.1: VEVOR Demolition Jack Hammer and included accessories.

2. Parentah Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun ngirangan résiko kejutan listrik, seuneu, sareng tatu anu parah.

2.1 Umum Power Tools Kasalametan Warnings

• Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung cahayana alus. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Kasalametan listrik: Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. A corded-electric tool operating at 110V requires a suitable power supply.
• Kasalametan Pribadi: Always wear eye protection, hearing protection, and heavy-duty gloves. Use a dust mask if working in dusty conditions. Dress properly; avoid loose clothing or jewelry.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan colokan ti sumber listrik samemeh nyieun sagala panyesuaian, ngaganti asesoris, atawa nyimpen parabot kakuatan.

2.2 Specific Jack Hammer Safety

• Workpiece Aman: Ensure the material being worked on is stable and cannot shift during operation.
• Pamasangan Pahat: Always ensure chisels are securely locked into the hex chuck before operation.
• Overheating: The tool features an efficient cooling system. However, avoid continuous operation for excessively long periods without breaks to prevent motor strain.
• Pakem cecekelan: Maintain a firm grip on the 360° rotary handle and main handle during operation.

3. Eusi Paket

Bungkus sadaya barang kalayan ati-ati teras parios kana daptar di handap. Upami aya barang anu leungit atanapi ruksak, hubungi layanan palanggan VEVOR.

• 1 x Demolition Jack Hammer (Model JH-65)
• 1 x Clay Spade Chisel (17.3''/440 mm)
• 1 x Scraping Chisel (16.1''/410 mm)
• 1 x Flat Chisel (14.9''/380 mm)
• 1 x Point Chisel (14.9''/380 mm)
• 1 x Flat Spade Chisel
• 1 x Big Scraping Chisel
• 1 x Oil Bottle (without Oil)
• 2 x Konci Hex
• 3 x konci
• 1 x Portabel Mawa Case

angka 3.1: Sadaya komponén kaasup dina iket.

4. Setélan

4.1 Ngabongkar sareng Inspeksi

Remove the jack hammer and all accessories from the carrying case. Inspect the tool for any signs of damage that may have occurred during shipping. Ensure all components listed in Section 3 are present.

4.2 Pamasangan Pahat

1. Ensure the jack hammer is unplugged from the power source.
2. Pull back the chuck collar (if applicable) or simply insert the hex shank of the desired chisel into the chuck opening.
3. Push the chisel firmly until it clicks into place. The high-strength alloy chuck is designed for quick assembly and disassembly.
4. Gently pull on the chisel to ensure it is securely locked and will not accidentally drop during operation.

4.3 Nanganan adjustment

The auxiliary 360° rotary handle can be adjusted to various positions for optimal comfort and control during operation. Loosen the handle clamp, rotate the handle to the desired angle, and then securely tighten the clamp.

5. Parentah Operasi

5.1 Sambungan Daya

Connect the power cord to a standard 110V electrical outlet. Ensure the outlet is properly grounded and capable of handling the 2200W power consumption of the tool.

5.2 Mimitian jeung Ngeureunkeun

• To start the jack hammer, press the ON/OFF switch.
• For continuous operation, engage the locking button. This feature helps reduce fatigue during prolonged work.
• To stop the tool, release the locking button (if engaged) and then press the OFF position on the switch.

5.3 Demolition Techniques

Apply firm, steady pressure to the tool. Allow the hammer's impact action to do the work. Do not lean excessively or apply body weight to force the tool, as this can reduce efficiency and increase risk of injury. Start with a shallow angle for initial breaking, then adjust as needed for deeper penetration or wider chipping.

Figure 5.1: Proper operation for concrete demolition.

5.4 Sistim cooling

The VEVOR Demolition Jack Hammer is equipped with an efficient cooling system designed to keep the motor at low temperatures even during extended use. Ensure the ventilation openings are clear of debris to allow for proper airflow.

6. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina palu jack anjeun.

6.1 beberesih

• After each use, unplug the tool and clean off any dust, concrete residue, or debris from the exterior using a dry cloth or soft brush.
• Pay special attention to the ventilation openings to prevent blockages.
• Clean the chuck area to ensure smooth chisel insertion and removal.

6.2 Lubrication

The jack hammer requires periodic lubrication to maintain its internal mechanisms. Refer to the included oil bottle and specific lubrication points in the tool's design. Typically, the gear housing requires grease, and the piston mechanism may require oil. Consult the tool's specific lubrication ports and recommended intervals.

6.3 Panyimpenan

When not in use, store the jack hammer and its accessories in the portable carrying case. Store in a clean, dry place, out of reach of children and away from direct sunlight or extreme temperatures.

Figure 6.1: Integrated aluminum body for durability and ease of maintenance.

7. Cara ngungkulan

Tingali tabel di handap pikeun masalah umum sareng solusi poténsialna.

8. Spésifikasi

9. Garansi jeung Rojongan

VEVOR products are designed for durability and performance. For warranty information, please refer to the documentation included with your product at the time of purchase or visit the official VEVOR website. For technical support or service inquiries, please contact VEVOR customer service through their official channels.

VEVOR resmi Websitus: www.vevor.com