Sena 3S Plus Bluetooth System Universal Microphone Kit User Manual

1. Bubuka

This manual provides detailed instructions for the proper use and maintenance of your Sena 3S Plus Bluetooth System Universal Microphone Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

The Sena 3S Plus is a compact and powerful Bluetooth intercom system designed for motorcycle helmets, offering two-way HD intercom communication, music listening, and phone call capabilities.

2. Eusi Paket

Pastikeun yén sadaya komponén aya dina pakét anjeun:

• Sena 3S Plus Bluetooth System Universal Microphone
• Kabel Ngecas USB-C
• Mounting Accessories (e.g., hook and loop fasteners, speaker pads)
• Manual pangguna (dokumén ieu)

Image 1: Sena 3S Plus Bluetooth System Universal Microphone Kit. This image displays the main unit and included accessories.

3. Produk Langkungview

Familiarize yourself with the main components and controls of your Sena 3S Plus unit.

3.1 Unit Utama

• Tombol Utama: Used for power on/off, pairing, and intercom functions.
• Tombol Volume Up: Increases volume, navigates menus.
• Tombol Volume Turun: Decreases volume, navigates menus.
• Palabuhan USB-C: Pikeun ngecas sareng apdet firmware.
• Mikropon: Integrated for voice communication.
• Panyatur: Pikeun kaluaran audio.

Note: Specific button locations and designs may vary slightly depending on the universal microphone kit type (boom or wired).

4. Instalasi jeung Setup

Follow these steps to install the Sena 3S Plus into your helmet.

4.1 Pasang Unit Utama

1. Pilih Lokasi: Select a flat surface on the left side of your helmet, near the bottom edge, for optimal microphone and speaker placement.
2. Permukaan bersih: Clean the chosen area thoroughly with an alcohol wipe and let it dry completely.
3. Attach Hook and Loop Fastener: Peel the backing from the hook and loop fastener (velcro) and firmly press it onto the helmet surface.
4. Pasangkeun Unit Utama: Align the main unit with the fastener and press firmly to secure it.

4.2 Pamasangan Speaker

1. Locate Ear Pockets: Identify the ear pockets inside your helmet.
2. Attach Speaker Pads: If necessary, use the provided speaker pads to adjust the speaker depth for comfort and clear audio.
3. Insert Speakers: Place the speakers into the ear pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.

4.3 Nempatkeun Mikropon

The 3S Plus comes with a universal microphone kit, which typically includes options for boom or wired microphones. Choose the one suitable for your helmet type (open-face/modular for boom, full-face for wired).

1. Mikropon Boom: Attach the boom microphone to the inside of the helmet, positioning the microphone capsule approximately 1-2 cm from your mouth.
2. Mikropon kabel: For full-face helmets, attach the wired microphone to the inside of the chin bar, ensuring it is close to your mouth and not obstructed.

penting: Ensure all wires are tucked away and do not interfere with helmet removal or comfort.

5. Parentah Operasi

5.1 Powering on / Pareum

• Daya Hurung: Pencét jeung tahan tombol Tombol Utama for 1 second. The LED will flash blue.
• Pareum listrik: Pencét jeung tahan tombol Tombol Utama for 5 seconds. The LED will flash red and the unit will power off.

5.2 Volume adjustment

• Ningkatkeun Jilid: Ketok dina Tombol Volume Naék.
• Turunkeun Jilid: Ketok dina Tombol Turun Tombol.

5.3 Ngecas

The Sena 3S Plus features USB-C charging.

1. Connect the supplied USB-C cable to the USB-C port on the main unit.
2. Sambungkeun tungtung kabel anu sanés ka sumber kakuatan USB (contona, port USB komputer, adaptor témbok USB).
3. The LED will glow red during charging and turn blue when fully charged.

A full charge typically takes approximately 2.5 hours and provides up to 8 hours of talk time.

6. Papasangan Bluetooth

6.1 Masangkeun sareng Ponsel

1. With the 3S Plus powered off, press and hold the Tombol Utama for 5 seconds until the LED flashes red and blue alternately. You will hear "Phone pairing".
2. Dina telepon sélulér anjeun, aktipkeun Bluetooth sareng milarian alat.
3. Pilih "Sena 3S Plus" tina daptar alat anu kadeteksi.
4. Upami dipenta, lebetkeun PIN "0000".
5. Once paired, the LED will flash blue every 5 seconds.

6.2 Pairing with another Sena Headset for Intercom

The Sena 3S Plus supports two-way HD intercom communication.

1. Ensure both 3S Plus units are powered on.
2. On Unit A, pencét jeung tahan tombol Tombol Utama salila 5 detik dugi ka LED kedip-kedip beureum sareng biru silih genti.
3. On Unit B, pencét jeung tahan tombol Tombol Utama salila 5 detik dugi ka LED kedip-kedip beureum sareng biru silih genti.
4. The units will automatically search for each other and pair. Once paired, the LEDs on both units will flash blue.
5. To start/end intercom conversation, tap the Tombol Utama dina boh unit.

The intercom range is up to 400 meters (approximately 1/4 mile) in open terrain.

7. Pangropéa sarta perawatan

• beberesih: Ngusap unit kalayan lemes, damp lawon. Ulah make bahan kimia atawa pangleyur kasar.
• Panyimpenan: Simpen alat dina tempat anu tiis sareng garing upami henteu dianggo.
• Perawatan batré: To prolong battery life, charge the unit at least once every six months if not used regularly. Avoid extreme temperatures.
• Tahan cai: The unit is designed to be water-resistant, but avoid submerging it in water.

8. Cara ngungkulan

8.1 Reset pabrik

If the unit is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset:

1. Kalayan unit dihurungkeun, pencét sareng tahan Tombol Utama salila 12 detik.
2. The LED will flash red rapidly, and you will hear "Factory reset".
3. The unit will power off. Power it on again to use.

Awas: A factory reset will delete all Bluetooth pairing information and settings.

9. Spésifikasi

Catetan: Spésifikasi tiasa robih tanpa aya bewara.

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

The Sena 3S Plus Bluetooth System Universal Microphone Kit comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Sena websitus pikeun istilah jeung kaayaan jaminan lengkep.

Simpen bukti pameseran anjeun pikeun klaim garansi.

10.2 Rojongan Palanggan

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Sena customer support:

• Websitus: www.sena.com/support
• Surélék: Refer to the Sena websitus pikeun email kontak.
• Telepon: Refer to the Sena websitus pikeun nomer telepon kontak.

Before contacting support, please have your product model number (3SPLUS-WB-10) and purchase date available.