Bubuka
The Steinbach Classic 400 Filter System is a powerful and efficient solution designed to maintain clean and clear water in your pool. This self-priming pump system is suitable for pools with a water content of up to approximately 33,000 liters. It features a robust pre-filter and a versatile 7-way valve for easy operation and maintenance. This manual provides essential information for the safe and effective installation, operation, and care of your filter system.
Image: The complete Steinbach Classic 400 Filter System, showcasing the filter tank, pump, and multi-port valve assembly.
Émbaran Kasalametan
Please read all safety instructions carefully before installing, operating, or performing maintenance on the filter system. Failure to follow these instructions could result in serious injury or property damage.
- Always disconnect the power supply before performing any work on the filter system.
- Ensure the system is installed on a stable, level surface, protected from direct sunlight and adverse weather conditions.
- Do not operate the pump if the water temperature exceeds 35°C (95°F).
- Ensure all connections are securely tightened to prevent leaks. Use appropriate sealing materials like Teflon tape on threaded connections.
- Jauhkeun barudak sareng piaraan tina sistem filter salami dioperasikeun.
- Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma (kalebet murangkalih) anu ngirangan kamampuan fisik, indrawi atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kana kasalametanana.
Eusi pakét
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- 1 x Steinbach Classic 400 Filter System (includes filter tank, pump, and 7-way valve)
- Hose connections (for Ø 32/38 mm hoses)
- Manometer (alat ukur tekanan)
- Karanjang pre-filter
- Instruksi Manual
- Necessary clamps and seals (may require additional Teflon tape for optimal sealing)
Disetél
Follow these steps for proper assembly and connection of your filter system:
- panempatan: Position the filter system on a firm, level surface near your pool. Ensure it is protected from rain and direct sunlight.
- Fill Filter Tank: Open the filter tank and fill it with the appropriate filter medium. The Classic 400 system can use either filter sand or Steinbach Filter Balls. Refer to the filter medium manufacturer's instructions for the correct quantity.
- Attach 7-Way Valve: Securely attach the 7-way valve to the top of the filter tank. Ensure the O-ring is correctly seated to prevent leaks. Tighten the clamp pageuh.
- Sambungkeun pompa: Sambungkeun pompa kana tangki filter nganggo selang anu disayogikeun. Pastikeun sadaya sambungan pageuh.
- Connect to Pool: Connect the filter system to your pool's inlet and outlet ports using Ø 32/38 mm hoses. The "INLET" port on the pump connects to the pool's skimmer/suction line, and the "RETURN" port on the 7-way valve connects to the pool's return line. Use hose clamps to secure all connections.
- Pompa Perdana: Before starting, ensure the pump is filled with water to prevent dry running. This is a self-priming pump, but initial priming helps.
- Sambungan listrik: Connect the pump to a grounded electrical outlet (220-240V~ / 50Hz). Ensure the power supply is suitable for the pump's maximum power of 450 W.
Gambar: Deukeut view of the Steinbach filter pump, showing the pre-filter basket and hose connections. This illustrates the pump's design and connection points.
Image: The Steinbach Classic 400 Filter System positioned next to a pool, demonstrating its typical installation environment and highlighting its compact design.
Parentah Operasi
The 7-way valve allows for various operating modes. Always turn off the pump before changing the valve position.
| Posisi | Katerangan |
|---|---|
| Nyaring | Normal filtering mode. Water passes through the filter medium to remove impurities. |
| Nyeuseuh tukang | Cleans the filter medium by reversing water flow. Directs dirty water to waste. Perform when pressure gauge reads high. |
| Bilas | Used after backwashing to settle the filter medium and flush remaining dirty water to waste. |
| Medar | Bypasses the filter medium, circulating water directly back to the pool. Useful for chemical distribution. |
| Kosong | Drains water directly from the pool to waste, bypassing the filter. |
| Usum Setélan | Used for winterizing the system. Relieves pressure on the valve's internal components. |
| Ditutup | Shuts off all flow through the valve. Do not operate the pump in this position. |
The filter system is designed for continuous operation within specified parameters. It is suitable for saltwater pools with a salt content up to 0.5 g/m³ and can handle water temperatures up to 35°C (95°F).
Pangropéa
Pangropéa rutin mastikeun kinerja anu optimal sareng umur panjang sistem filter anjeun.
- Ngumbah balik: Perform backwashing when the pressure gauge reading is 0.2-0.3 bar (3-5 psi) above the clean filter reading, or when water clarity decreases. Follow with a rinse cycle.
- Pra-filter beberesih: Regularly check and clean the pre-filter basket located in the pump. Turn off the pump, open the pre-filter lid, remove and clean the basket, then reassemble.
- Filter Medium Replacement: Filter sand typically needs replacement every 3-5 years, while Filter Balls may require cleaning or replacement more frequently depending on usage. Consult your filter medium's instructions.
- Winterization: Before freezing temperatures, drain all water from the filter system, pump, and hoses. Store the pump and valve in a dry, frost-free location.
Pamérésan masalah
Ieu sababaraha masalah umum sareng solusi poténsialna:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Aliran Cai Leutik / Filtrasi Goréng | Clogged pre-filter basket; Dirty filter medium; Air in the system; Incorrect valve setting. | Clean pre-filter; Backwash/Rinse filter; Bleed air from system; Set valve to "Filter". |
| Cai Bocor | Loose connections; Damaged O-rings/seals; Insufficient sealing material. | Kencangkeun sadaya selang clamps and threaded connections; Inspect and replace damaged seals; Apply Teflon tape or pipe sealant to threaded connections. |
| Pompa Teu Dimimitian | No power; Motor overload; Impeller jammed. | Check power supply and circuit breaker; Allow motor to cool; Inspect impeller for obstructions (disconnect power first). |
| Bacaan Alat Ukur Tekanan Tinggi | Clogged filter medium. | Laksanakeun siklus backwash sareng rinse. |
spésifikasi
Detailed technical specifications for the Steinbach Classic 400 Filter System:
| Fitur | Nilai |
|---|---|
| Nomer modél | 00-40340 |
| merek | STEINBACH |
| Ukuran produk (L x W x H) | 66.5 x 55.5 x 36.5 cm |
| Item Beurat | 798.32 grams (approx. 1.76 pounds) |
| Circulation Capacity | 6,600 liters per hour (l/h) |
| Pump Capacity (Max. Flow Rate) | 8,500 liters per hour (l/h) |
| Max. Sirah | 9 méter |
| Sasayogian tanaga | 220-240V~ / 50Hz |
| Max. Konsumsi Daya | 450 W |
| Diaméter sambungan selang | Ø 32/38 mm |
| Max. Suhu cai | 35°C (95°F) |
| Saltwater Suitability | Up to 0.5 g/m³ salt content |
| Filter Medium Options | Filter Sand or Filter Balls |
Image: A performance curve graph illustrating the relationship between head (H) and flow rate (Q) for the filter pump, indicating its operational characteristics.
Garansi sareng Rojongan
STEINBACH products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official STEINBACH website. For technical support or inquiries, please contact STEINBACH customer service through their official channels.
Catetan: Simpen bukti pameseran anjeun pikeun klaim garansi.
