Instruksi Manual

1. Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of the Panduit JB1WH-A 1-Gang Deep Outlet Box. Please read this manual thoroughly before installation to ensure safe and effective use of the product.

The Panduit JB1WH-A is a single-gang, one-piece outlet box designed for low voltage and/or fiber optic applications. It features an adhesive backing for quick installation and is compatible with Pan-Way Screw-On Faceplates or any NEMA standard single-gang faceplate. This box is intended for use with Pan-Way LD profile raceway systems.

2. Produk Langkungview

Gambar 1: Angled view of the Panduit JB1WH-A 1-Gang Deep Outlet Box. This image shows the single-gang design, deep interior, and white finish of the box. It highlights the internal structure designed for mounting faceplates and the areas for conduit breakouts.

The JB1WH-A is a compact, durable outlet box constructed from Acrylonitrile Butadiene Styrene. Its one-piece design simplifies installation, requiring no assembly. Key features include:

• Single-gang configuration.
• Integrated adhesive backing for secure mounting.
• Compatibility with Pan-Way Screw-On Faceplates and NEMA standard single-gang faceplates.
• Designed for use with Pan-Way LD profile raceway.
• Breakouts for 1/2-inch, 3/4-inch, or 1-inch diameter conduit.

3. Setup jeung Instalasi

The Panduit JB1WH-A outlet box is designed for straightforward surface mounting. Follow these steps for proper installation:

1. Persiapan: Ensure the mounting surface is clean, dry, and smooth. The surface should be free of dust, grease, or debris to ensure optimal adhesion.
2. Raceway Integration: If using with Pan-Way LD profile raceway, ensure the raceway is properly installed and aligned with the desired location of the outlet box.
3. Conduit Entry (Optional): If conduit entry is required, carefully remove the appropriate knockout sections (1/2-inch, 3/4-inch, or 1-inch diameter) using a suitable tool.
4. Pamasangan: Remove the protective liner from the adhesive backing on the rear of the outlet box. Carefully position the box on the prepared surface, ensuring it is level and aligned. Press firmly for several seconds to secure the adhesive bond. For additional security, the box can be screw-mounted through designated points if desired (screws not included).
5. Pamasangan Faceplate: Once the box is securely mounted, install the desired Pan-Way Screw-On Faceplate or NEMA standard single-gang faceplate onto the box using appropriate screws (not included with the box).
6. Wiring: Rute low voltage or fiber optic cables into the box through the raceway or conduit entries. Complete all necessary wiring connections according to local electrical codes and standards.

Awas: Always ensure power is disconnected before performing any wiring work. If you are unsure about any electrical procedures, consult a qualified electrician.

4. Nyuping

The Panduit JB1WH-A outlet box functions as a housing for low voltage and fiber optic components, providing a secure and organized enclosure for wiring and devices. Once installed and wired, the box facilitates the connection and termination of cables, allowing for the proper operation of the installed faceplate and associated devices.

No user interaction is required with the box itself during normal operation, as its primary function is to provide a protective and accessible enclosure for electrical or data components.

5. Pangropéa

The Panduit JB1WH-A outlet box requires minimal maintenance. Regular inspection can help ensure its longevity and continued performance:

• beberesih: Periodically wipe the exterior of the box with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents, as these may damage the material.
• Pamariksaan: Annually inspect the box for any signs of physical damage, such as cracks, discoloration, or loose mounting. Ensure the faceplate remains securely attached.
• Pamariksaan Adhesi: If the box was mounted using only the adhesive backing, periodically check that the box remains firmly adhered to the surface.

6. Cara ngungkulan

Most issues related to the outlet box are typically due to improper installation or physical damage. Consider the following if you encounter problems:

• Box is Loose:
  • If the adhesive backing is failing, consider reinforcing the mounting with screws if the surface allows.
  • Ensure the mounting surface was properly prepared (clean, dry, smooth) during initial installation.
• Faceplate Does Not Fit:
  • Verify that the faceplate is a standard single-gang size or a compatible Pan-Way Screw-On Faceplate.
  • Check for any obstructions inside the box preventing proper seating of the faceplate.
• Ruksakna Fisik:
  • If the box is cracked or broken, it should be replaced to ensure proper protection of internal components.

For issues related to the electrical or data components housed within the box, refer to the specific troubleshooting guide for those devices.

7. Spésifikasi

8. Garansi jeung Rojongan

Specific warranty information for the Panduit JB1WH-A 1-Gang Deep Outlet Box is not provided within this manual. For details regarding product warranty, returns, or technical support, please refer to the official Panduit website or contact Panduit customer service directly.

You may find additional resources and contact information at the official Panduit websitus: www.panduit.com