RangeXTD WiFi Range Extender Manual
RangeXTD WiFi Range Extender Manual
Introduction
RangeXTD can be used for providing WiFi service in big areas for home and commercial use. It can take an existing 802.11n wireless signal of your wireless router to repeat and extend its range. RangeXTD supports 2.4G wireless network connection, and it can support 2.4G transmission speeds of up to 300Mbps. It has 2X built-in antennas and provides excellent wireless performance, transmission rates and stability technology automatically avoids channel conflicts using its channel selection feature.
Package Contents
- 1 x RangeXTD Wi-Fi AP/Router (the Device)
- 1 x EU plug
- 1 x US Plug
- 1 x Quick Installation Guide
- 1 x RJ45 Cable
Hardware Overview
Default Parameters
URL: 192.168.7.234
Login Password: admin
Wi-Fi SSID: RangeXTD
Wi-Fi Key: no
- C) Power On/Off
- FPS Button
- Mode Selector
- Reset Button
- WAN/LAN Port
- LAN Port
- 3 x Wi-Fi Single
- Power/WPS LED
- WAN/LAN LED
- LAN LED
LED indicators
| POWER/WPS | ON: The Device is power on
OFF: The Device is not receiving electrical power. Slow Flashing: The Device WPS Waiting Client connection Fast Flashing: The Device Connecting to your AP/Router |
| LAN
WAN/LAN |
ON: The Ethernet port is connected.
OFF: The Ethernet port is disconnected. Flashing: Data Transferring |
Wi-Fi Signal
|
Mode |
 |
 |
 |
Description |
| AP/Router |
ON |
ON |
ON |
Wi-Fi Single output power 100% |
| Repeater |
ON |
ON |
ON |
Excellent reception signal strength 50% to 100% |
|
ON |
ON |
OFF |
Weak reception | |
|
ON |
ON |
OFF |
signal strength below 25% | |
|
Flashing |
OFF |
OFF |
Disconnected |
Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (as shown below), please do the following:
Wireless AP Mode
The Device is connected to a wired network then transforms the wired Internet access into wireless so that multiple devices can share the Internet.
This mode is fit for office, home and places where only wired network is available.
Wireless Repeater Mode
The Device is copies and reinforces the existing wireless signal to extend the coverage of the signal. This mode is especially useful for a large space to eliminate signal-blind corners. This mode is fit for a large house, office, warehouse or other spaces where the existing signal is weak.
Router Mode
The Device is connected to a DSL or cable modem and works as a regular wireless router. This mode is fit for an environment where Internet access from DSL or cable modem is available for one user but more users need to share the Internet.
Configure the Wi-Fi Repeater Mode
Configure the Wi-Fi Repeater Mode with WPS Button.
This is the easiest way to configure the Device. First, check whether your wireless router supports WPS. For further details, please read the operating instructions for your wireless router.
Tips: If you want to keep the stable connection between your router and our repeater at REPEATER mode, Please install our Repeater at a suitable position.
You can check the suitable position as the followings:
Check the signal indicator on the repeater, if the LED is below 2 levels, please find new place.
OR You can check the Wi-Fi signal on your smartphone, if the signal is below 2 levels, we suggest to change the location of our repeater
- The mode selector must be set to the “Repeater” position for Repeater Mode.
- Plug the Device into a wall socket.
- Press the WPS button on the Device.
The WPS LED fast flashing for approx. 2 minutes. - Within these 2 minutes, please Press the WPS button of your Wireless Router.
directly for 2 – 3 seconds. (For further details, please read the operating instructions for your wireless router).
The Device then automatically connect to your wireless router and copies wireless key of the settings. The device Wi-Fi Password same your AP/Router. After the reboot has been completed, please go to your device WLAN setting, connect to new SSID.
You can configure the Wi-Fi Repeater Mode by connecting it with your computer/laptop with enclosed RJ45 cable or wirelessly.
A. Configure the Wi-Fi Repeater Mode Wirelessly.
A1. The mode selector must be set to the “Repeater” position for Repeater Mode. Plug the device into a wall socket.
A2. Click on the network icon ( 
or 
) on the right bottom of your desktop. You will find the signal from the RANGEXTD. Click on ‘Connect’ then wait for a few seconds.
A3. Open web browser and type 192.168.7.234 in the browser address box. This number is the default IP address for this device.
Resetting the RANGEXTD repeater
Please check whether the Device accord with factory default setting once you can’t entered 192.168.7.234. Press and hold the Reset button for 10 seconds or until the indicator turns off. After you reset your RANGEXTD Repeater, unplug the RANGEXTD Repeater for 10 seconds. Plug it back in and wait about 30 seconds, then check your WiFi network for the network called ‘RANGEXTD’ on your computer or mobile device.
A4. The login screen below will appear. Enter the Password then click “Login” to login. The default Password is “admin”.
A5. After logging in, you will see the web page below, click on the “Router/ Repeater/AP”.
A6. From the list, select a Wi-Fi SSID. After having selected a Wi-Fi SSID, you must then specify the password of your wireless router.
Completing the entry, click on the “Apply” button.
After the reboot has been completed, please go to your device WLAN setting, connect to new Wi-Fi SSID.
B. Configure the Wi-Fi Repeater Mode with RJ45 Cable.
- Plug the Device into a wall socket. Connect your computer/laptop with the Device with RJ45 Cable.
- Follow process A3 to A6 to configure the Device.
Configure the Wi-Fi AP Mode
Use the AP Mode to obtain a “wireless access point”. The wireless end devices will connect to the Device in this mode. You can also use this mode, for example, to make a formerly non-wireless-enabled router wireless-enabled.
- The mode selector must be set to the “Access Point” position for AP Mode.
- Plug the Device into a wall socket.
- Follow process A2 to A5.
The following message will be displayed on your web browser:
| SSID | Wireless SSID of the Device |
| Security type | Setup the wireless security and encryption to prevent from unauthorized access and monitoring. Supports WPA, WPA2, WPNWPA2 encryption methods. |
| Security key | The “Wi-Fi Password” of the Device |
Click on ‘Apply’ button, The Device will restart.
After the reboot has been completed, please go to your device WLAN setting, connect to new Wi-Fi SSID.
Configure the Wi-Fi Router Mode
The Device is connected to a DSL or cable modem and works as a regular wireless router.
Internet access from DSL or cable modem is available for one user but more users need to share the Internet.
- The mode selector must be set to the “Route” position for Router Mode.
- Plug the Device into a wall socket
- Connect your DSL Modem with the Device with RJ45 Cable.
- Follow process A3 to AS.
- Click on the Router button
Choose your WAN Connection Type.
If PPPoE (ADSL Dial-up) is selected, please enter the Account and Password from your ISP, These fields are case-sensitive.
Enter the Device wireless parameter. It’s recommended that you rename as SSID, choose a Authentication Mode and enter a Wi-Fi Password.
| SSID | The “SSI D” of the Device |
| Security type | Setup the wireless security and encryption to prevent from unauthorized access and monitoring. Supports WPA, WPA2, WPNWPA2 encryption methods. |
| Security key | The “Wi–Fi Password” of the Device |
If Static IP is selected, please enter the IP Address, Subnet Mask, Default Gateway, DNS,etc.
Enter the Device wireless parameter. It’s recommended that you rename as SSID, choose a Authentication Mode and enter a Wi-Fi Password.
Click ‘Apply’ button, It will restart.
Wait for a few seconds the Device is ready for use.
If DHCP is selected, the Device gets the IP address automatically from your Router or ISP DHCP serve. No configuration should be set and you can go on with the wireless configuration.
Enter the Device wireless parameter. It’s recommended that you rename as SSID, choose a Authentication Mode and enter a Wi-Fi Password.
Click ‘Apply’ button, It will restart.
Wait for a few seconds the Device is ready for use.
Management via Web Browser
Wireless Base Configuration
Please follow the following instructions: Click “Wireless” located at the web management interface, the following message will be displayed on your web browser:
You could configure the basic setting of Wireless settings for communication, such as Network Name (SSID) . The Access Point can be set simply with only the minimum setting items.
| Wireless Status | Wireless On/Off |
| SSID | Wireless SSID of the Device |
| Security type | Setup the Wireless security and encryption to prevent from unauthorized access and monitoring.
Supports WPA, WPA2, WPNWPA2 encryption methods. |
| Security key | The “Password” of the AP/Router |
Click ‘Apply’ button, The Device will restart.
Change Management password
Default password of the device is “admin”, and it’s displayed on the login prompt when accessed from web browser. There’s a security risk if you don’t change the default password, since everyone can see it. This is very important when you have wireless function enabled.
To change password, please follow the following instructions:
Please click “Password” menu on the management setting interface, the following message will be displayed on your web browser:
Click ‘Apply’ button, The Device will log off.
If you forgot your existing password, you can reset the password by clicking the reset button on the side of the device.
Firmware Upgrade
The system software used by this router is called ‘firmware’, just like any applications on your computer, when you replace the old application with a new one, your computer will be equipped with new function. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.
Please click “Upgrade Firmware” located at the management setting interface, and then the following message will be displayed on your web browser:
Click ‘Browse … ‘ or ‘Choose File’ button first; you’ll be prompted to provide the filename of firmware upgrade file. Please download the latest firmware file from our website, and use ii to upgrade your router.
After a firmware upgrade file is selected, click ‘Apply’ button, and the device will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from the device. If the firmware you uploaded is interrupt, the firmware upgrade will fail, and you may have to return the device to the dealer of purchase to ask for help.
Warranty voids if you interrupted the upgrade procedure.
How to connect your computer/laptop with the Device
Adding a Wireless computers to the device
- Log on to the computer.
- Open Connect to a Network by right-clicking the network icon ( or ) in the notification area.
- Choose the wireless network from the list that appears, and then click Connect.
- Type the network security key or passphrase if you are asked to do so, and then click OK. You’ll see a confirmation message when you are connected to the network..
- To confirm that you added the computer, do the following:
Open Network by clicking the Start button
, and then clicking Control Panel. In the search box, type network, and then, under Network and Sharing Center, click View network computers and devices. You should see icons for the computer you added and for the other computers and devices that are part of the network.
Note: If you don’t see icons in the Network folder, then network discovery and file sharing might be turned off.
Adding a Wireless computers to the Device with WPS Button
This is the easiest way to establish a connection to the AP. First, check whether your end device supports WPS. For further details, please read the operating instructions for your end device.
- Log on to the computer.
- Press the WPS button on the device for 2 seconds. The WPS LED now flashes for approx. 2 minutes.
- Within these 2 minutes, please press the connection button (WPS) on your end device. (For further details, please read the operating instructions for your end device.)
Your end device then automatically connects to the Device and applies all of the settings. You should see icons for the computer you added and for the other computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the Device
- Plug the device to a socket. Connect your computer / laptop with the device with enclosed RJ45 Cable.
- To Confirm that you added the computer, do the following:
Open Network by clicking the Start button , and then clicking Control Panel. In the search box, type network, and then, under Network and Sharing Center, click View network computers and devices. You should see icons for the computer you added and for the other computers and devices that are part of the network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-anetwork
http://windows.microsofl.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
WEEE Directive & Product Disposal
At tha and of its serviceable life, this product should not be treated as household or general waste.
It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This product may not be collocated or operated in conjunction with any other antenna or transmitter. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
FAQS
Please check your internet connection. If it is OK, please check your device’s default IP address. If you still can’t access the configuration page, please contact our support team for further assistance.
Please check your internet connection. If it is OK, please check your device’s default IP address. If you still can’t access the configuration page, please contact our support team for further assistance.
Please make sure that your computer and the device are in the same network segment and then try again.
Please make sure that there is no firewall or anti-virus software running on your computer and then try again.
During the setup process, the default password is “admin”. Once you have reached and selected your home router’s SSID, you will enter the same password as your WiFi.
Yes it will work for your smartphone’s hotspot. It will increase the hotspot’s WiFi range to cover more area but the internet speed will still depends on your mobile data signal. Please be advised that it might consume more mobile data usage for your cellular plan as more users can connect easily to your hotspot/WiFi.
the device is designed indoor, not water resistant and water proof. We highly advised you to cover it up if you’re going to use it outside with direct sunlight or rainfall. Please be advised that metals might distrupt the connection between your main router and the Range XTD.
Neither.
The lights blink when you lost power. Usually it reconnects on its own. You may need to hit the WPS button on your router and the XTD, it usually reconnects after the connection resets.
the extender did work for me all the time to get a stronger signal in my garage for the opener.
We highly suggest that you use Router Mode to setup your own SSID and unique pasword for your new WiFi network. The Repeater Mode will extend your current WiFi network but will have the same password with it. You can also download the RangeXTD App on Playstore or App Store for reference on your end.
RangeXTD is universally compatible and works with almost any router (802.11 standard) for hassle-free WiFi.
NO
The device can reach up to 100m indoors and 300m outdoors. Yes, it works well even with solid objects like walls and floors as it uses 2.4GHz band. If faster speed is most important to you, 5GHz is usually a better choice than 2.4 GHz but if the wireless range is more important to you, 2.4 GHz is usually a better choice than 5 GHz.
Yes, it will work with a Verizon WiFi Jetpack. It will increase the device’s WiFi range to cover more area but the internet speed will still depends on your current data plan and signal. Please be advised that it might consume more data usage for your internet data plan as more users can connect easily to your hotspot/WiFi.
VIDEO
RangeXTD WiFi Range Extender Manual – Download [optimized]
RangeXTD WiFi Range Extender Manual – Download
References
- User Manualmanual.tools
The bad thing is that the cuts began to be much more common and watching anything on Netflix became a nightmare.
Lo malo es que los cortes empezaron a ser bastante más habituales y ver cualquier cosa en Netflix se volvía una pesadilla.
Lo malo es que los cortes empezaron a ser bastante más habituales y ver cualquier cosa en Netflix se volvía una pesadilla.
How can I fix frequent disconnections and slow streaming performance on my RangeXTD WiFi Range Extender?
Frequent disconnections and buffering during high-bandwidth activities like Netflix streaming often indicate signal interference or poor placement. To improve your RangeXTD performance, try the following steps:
192.168.7.234and check the "Upgrade Firmware" section to ensure your device is running the latest software, which may include bug fixes for stability.Read the full Q&A page
Good evening, do you also have an internet connection and what does it cost per month? Thanks
Buonasera avete anche una connessione internet e che costo ha mensile?grazie
Something is not correct with the instructions…I’ve been working on installation for over an hour….
My arris router does not have a WPS button
My arris router does not have a WPS button
How do I set up the RangeXTD WiFi Range Extender if my Arris router does not have a WPS button?
If your Arris router does not have a WPS button, you can still set up the RangeXTD in Wireless Repeater Mode using a web browser on your computer or smartphone. Follow these steps:
RANGEXTDand connect to it.192.168.7.234into the address bar.admin.The device will reboot. Once finished, you can move the RangeXTD to a location halfway between your router and the area with a poor signal. If you cannot access the setup page, try resetting the device by holding the Reset button for 10 seconds while it is plugged in.
Read the full Q&A page
Hello,
I wish to “Configure the Wi-Fi repeater mode” … without success, I went to an Orange store which confirmed to me that this Rangextd does not even turn on … Defective.
I would like to return the product to you … at what address? and how soon will I have the new Rangextd?
Order date: 2021-07-03
Order number: 1074096834
If you want to call me, My tel: 0686863079
Thank you for your reply
Bonjour,
Je souhaite “Configurer le mode répéteur Wi-Fi”… sans succès, je suis allée à une boutique Orange qui me confirme que ce Rangextd ne s’allume même pas … Défectueux.
Je souhaite vous retourner le produit … à quelle adresse ? et dans combien de temps aurais-je le nouveau Rangextd ?
Date Commande : 2021-07-03
Numéro commande : 1074096834
Si vous souhaitez m’appeler, Mon tel : 0686863079
Merci de votre réponse
I wish to "Configure the Wi-Fi repeater mode" ... without success, I went to an Orange store which confirmed to me that this Rangextd does not even turn on ... Defective.
I would like to return the product to you ... at what address? and how soon will I have the new Rangextd?
Order date: 2021-07-03
Order number: 1074096834
If you want to call me, My tel: 0686863079
Thank you for your reply</em>
Bonjour,
Je souhaite "Configurer le mode répéteur Wi-Fi"... sans succès, je suis allée à une boutique Orange qui me confirme que ce Rangextd ne s'allume même pas ... Défectueux.
Je souhaite vous retourner le produit ... à quelle adresse ? et dans combien de temps aurais-je le nouveau Rangextd ?
Date Commande : 2021-07-03
Numéro commande : 1074096834
Si vous souhaitez m'appeler, Mon tel : 0686863079
Merci de votre réponse
How do I return a defective RangeXTD WiFi Range Extender and get a replacement?
Manuals.plus is a repository for product manuals and does not handle sales, shipping, or warranty replacements for RangeXTD. To return a defective device or request a replacement, you must contact the retailer where you purchased the item or the manufacturer directly.
If you purchased through the official RangeXTD website, you should contact their customer support team. Based on the manual, if the device is truly not powering on, ensure the Power On/Off switch on the side is in the 'ON' position and that the POWER/WPS LED is not illuminated. If it remains dark after trying different outlets, it is likely defective.
Before returning, you may want to try a factory reset: Press and hold the Reset button for 10 seconds while the device is plugged in. If there is still no power light, please reach out to the vendor using your order number (1074096834) to initiate a return under their warranty policy.
Read the full Q&A page
Is there any difficulty installing with a MAC without Windows. I have the WI FI signal on my Mac as well as on the iPhone but no internet connection
a-t -il des difficultés pour l’installation avec un MAC sans Windows. J’ai le signal WI FI sur mon Mac ainsi que sur l’iPhone mais pas de connexion internet
a-t -il des difficultés pour l'installation avec un MAC sans Windows. J'ai le signal WI FI sur mon Mac ainsi que sur l'iPhone mais pas de connexion internet
Is there any difficulty installing the RangeXTD WiFi Range Extender on a Mac without Windows, and why do I have a WiFi signal but no internet connection?
There is no difficulty installing the RangeXTD on a Mac or iPhone; the setup is performed via a web browser and does not require Windows software. If you see a WiFi signal but have no internet, it usually means your devices are connected to the RangeXTD, but the RangeXTD is not successfully communicating with your main router.
To resolve this on your Mac or iPhone, follow these steps:
192.168.7.234into the address bar. The default password isadmin.Read the full Q&A page
When I use your range ext, it shows up in list of connections with my router name and ext on the end, for example ABC-123-ext which I can connect to, but it comes up as an unsecure network connection. How do I make it secure so I can feel safe using this extender and know that my neighbors are not getting free wifi?
How do I secure my RangeXTD WiFi extender network with a password to prevent unauthorized access?
If your RangeXTD network (e.g., ABC-123-ext) is showing as "unsecured," it means the encryption settings were not properly synchronized or configured during setup. To secure your network and prevent neighbors from accessing it, follow these steps:
If your main router has a WPS button, reset the RangeXTD (hold the Reset button for 10 seconds) and then use the WPS method. Press the WPS button on the RangeXTD, then press the WPS button on your router within 2 minutes. This automatically copies your router's security settings and password to the extender.
192.168.7.234into the address bar.admin.Note: It is also highly recommended to change the management password from the default "admin" under the Password menu in the web interface to prevent others from changing your settings.
Read the full Q&A page
That’s exactly what I would like to know. It is written that you should enter the address 192.168.7.234, but you cannot get to the page; very annoying 🙁
Genau das würde ich auch gerne wissen. Es wird geschrieben, man soll die Adresse 192.168.7.234 eingeben, aber auf die Seite kommt man nicht; sehr ärgerlich 🙁
Please try http://192.168.1.234
I just received the RANGEXTD.
I installed and configured it by the WPS function in “Repeater” mode
The WI-FI network works well
But the address http://192.168.7.234 indicated in the manual to access the settings does not work: “Waiting time exceeded” error
The address 192.168.1.234 mentioned above does not work either, same error.
Je viens de recevoir le RANGEXTD.
Je l’ai installé et configuré par la fonction WPS en mode “Repeater”
Le réseau WI-FI fonctionne bien
Mais l’adresse http://192.168.7.234 indiquée dans le manuel pour accéder aux réglages ne fonctionne pas: erreur “Délai d’attente dépassé”
L’adresse 192.168.1.234 citée plus haut ne fonctionne pas non plus, même erreur.
does not work too
funktioniert auch nicht
Hello Andrea, I had the same problem after setting it up, I could no longer connect to the IP 192.168.7.234 because it was assigned a different one. Am very easy to log in through the Fritzbox (router) – & gt; in the home network overview click on “WR18” (is the RangeXTD amplifier). Then you will be connected to the current IP. Enter the password as usual. 🙂 Hope I could help you.
Hallo Andrea, das gleiche Problem hatte ich auch nach dem Einrichten konnte ich mich nicht mehr mit der IP 192.168.7.234 verbinden, da er eine andere zugewiesen bekommt. Bin ganz einfach über die Fritzbox (Router) einloggen -> bei Heimnetz Übersicht auf “WR18” (ist der RangeXTD Verstärker) klicken. Dann wirst du mit der aktuellen IP verbunden. Wie gehabt das Passwort eingeben. 🙂 Hoffe ich konnte dir weiterhelfen.
When I use your Range ext it shows up in the list of connections with my router name and ext at the end, for example ABC-123-ext that I can connect to, but it shows up as an unsecure network connection. How do I make it safe so that I feel safe with this extender and know that my neighbors are not getting free wifi? The question has already been asked, unfortunately I have not found an answer
Wenn ich Ihre Range ext verwende, wird sie in der Liste der Verbindungen mit meinem Routernamen und ext am Ende angezeigt, zum Beispiel ABC-123-ext, mit der ich eine Verbindung herstellen kann, aber es wird als unsichere Netzwerkverbindung angezeigt. Wie mache ich es sicher, damit ich mich mit diesem Extender sicher fühle und weiß, dass meine Nachbarn kein kostenloses WLAN erhalten? Die Frage wurde schon mal gestellt, leider habe ich keine Antwort gefunden
Wenn ich Ihre Range ext verwende, wird sie in der Liste der Verbindungen mit meinem Routernamen und ext am Ende angezeigt, zum Beispiel ABC-123-ext, mit der ich eine Verbindung herstellen kann, aber es wird als unsichere Netzwerkverbindung angezeigt. Wie mache ich es sicher, damit ich mich mit diesem Extender sicher fühle und weiß, dass meine Nachbarn kein kostenloses WLAN erhalten? Die Frage wurde schon mal gestellt, leider habe ich keine Antwort gefunden
How do I secure my RangeXTD WiFi extender network to prevent unauthorized access and remove the 'unsecure network' warning?
If your RangeXTD network is showing as "unsecure," it means the encryption (password protection) is not active. To secure your network and prevent neighbors from accessing your WiFi, follow these steps:
192.168.7.234in the address bar.admin.Once these settings are applied, the "unsecure" warning on your devices should disappear, and a lock icon will appear next to the network name.
Read the full Q&A page
need to return does not work
How do I troubleshoot the RangeXTD WiFi Range Extender if it is not working, or how do I return it?
If your RangeXTD WiFi Range Extender is not working, we recommend attempting a factory reset before seeking a return, as this often resolves connectivity issues. To reset the device:
If the device still fails to function, please note that Manuals+ is an online repository for manuals and does not sell or distribute hardware. To process a return or refund, you must contact the specific retailer or website where you originally purchased the device. If you purchased directly from the official RangeXTD site, look for their support or 'Contact Us' page to initiate a warranty claim.
Read the full Q&A page
does not work need to return need adress
How can I return my RangeXTD WiFi Range Extender and what is the return address?
Manuals.plus is a repository for product manuals and does not handle sales, shipping, or returns for RangeXTD products. To return your device, you must contact the specific retailer or website where you originally purchased it.
If you purchased directly from the official RangeXTD website, you should contact their customer support team to obtain a Return Merchandise Authorization (RMA) and the correct return address. Returning a package without an RMA often results in the return being rejected.
Before returning the device, you may want to try a Factory Reset to see if it resolves the issue:
192.168.7.234.Note: If you attempted a firmware upgrade and it was interrupted, the manual states the warranty may be voided and you may need to contact your dealer for assistance.
Read the full Q&A page
Hello,
My “Freebox mini server” does not have a WPS button … The instructions are too complex. What should I do to connect the WiFi repeater (without having to use a wire)? Thank you
Bonjour,
Mon “server Freebox mini” n’a pas de bouton WPS … La notice est tropcomplexe. Que dois je faire pour connecter le répéteur Wifi (sans avoir à utiliser de fil) ? Merci
My "Freebox mini server" does not have a WPS button ... The instructions are too complex. What should I do to connect the WiFi repeater (without having to use a wire)? Thank you<e/em>
Bonjour,
Mon "server Freebox mini" n'a pas de bouton WPS ... La notice est tropcomplexe. Que dois je faire pour connecter le répéteur Wifi (sans avoir à utiliser de fil) ? Merci
How do I connect the RangeXTD WiFi Range Extender to my router without using a WPS button or a wired connection?
Since your Freebox mini server does not have a WPS button, you can connect the RangeXTD wirelessly using its web-based configuration interface. Follow these steps:
192.168.7.234into the address bar.admin.The device will reboot. Once finished, you can move the RangeXTD to a location halfway between your router and the area with a poor signal. Your devices will now connect to the extended network using your original WiFi password.
Read the full Q&A page
I find the instructions to be very difficult to understand! I’m not stupid, but I’d expect easier instructions. For an example, I’ll open the network setting on my iPhone. I’ll see the address for the extender. It will ask me to join the network. I will put in my password that works off of my regular router and I receive an error message that my password is incorrect. I’ve tried this numerous times and I still receive the same error message! How do I fix this mess? Thank you.
Why is my iPhone saying the password is incorrect when I try to connect to the RangeXTD extender?
It is a common point of confusion during the initial setup of the RangeXTD. When you first see the RangeXTD network in your iPhone's Wi-Fi settings, it is an open, unsecured signal used only for configuration.
To fix the "incorrect password" error and complete your setup, please follow these steps:
192.168.7.234into the address bar.admin.If you continue to get errors, perform a factory reset by pressing and holding the Reset button for 10 seconds while the device is plugged in, then start the process over.
Read the full Q&A page
I purchased this rangextd extender month’s ago because it said on internet that it was a good product and easy to install! I followed the instructions in the manual and also on You Tube with no luck. After weeks of failed attempts to install it I gave up and just threw it down!
Well the reason I bought this thing has not changed! So I am giving it one more shot in the meantime I have read some of the reviews on your product and I am not surprised at my difficulties to get it installed. I have a wireless system and I would like someone to give me the proper procedure to install this with a guaranteed secure system or please refund my money!
Well the reason I bought this thing has not changed! So I am giving it one more shot in the meantime I have read some of the reviews on your product and I am not surprised at my difficulties to get it installed. I have a wireless system and I would like someone to give me the proper procedure to install this with a guaranteed secure system or please refund my money!
How do I properly install the RangeXTD WiFi Range Extender and ensure a secure connection?
To ensure a successful and secure installation of your RangeXTD WiFi Range Extender, please follow these steps for the Wireless Repeater Mode, which is the most common setup for home use:
192.168.7.234. Log in with the default password:admin.Regarding your request for a refund: Manuals+ is a platform for hosting product manuals and is not the manufacturer or retailer of RangeXTD. You will need to contact the specific store or website where you purchased the device to initiate a refund claim.
Read the full Q&A page
rangextd is not getting any power. tried in several sockets.
what am I doing wrong? or is the device faulty? can i check this?
Please help. regards
rangextd bekommt keinen strom. in mehreren steckdosen v ersucht.
was mache ich falsch? oder ist das gerät fehlerhaft? kann ich das überprüfen?
bitte um hilfe. grüße
what am I doing wrong? or is the device faulty? can i check this?
Please help. regards<e/em>
rangextd bekommt keinen strom. in mehreren steckdosen v ersucht.
was mache ich falsch? oder ist das gerät fehlerhaft? kann ich das überprüfen?
bitte um hilfe. grüße
Why is my RangeXTD WiFi Range Extender not receiving power, and how can I check if the device is faulty?
If your RangeXTD is not receiving power after trying multiple sockets, please check the following to determine if the device is faulty:
If the Power LED remains off after verifying the switch is ON and the plug is secure, the device is likely faulty and you should contact the retailer for a warranty replacement.
Hinweis für Deutschsprachige: Bitte stellen Sie sicher, dass der Ein-/Ausschalter an der Seite auf "ON" steht und der Steckeraufsatz fest am Gerät eingerastet ist. Wenn die Power-LED weiterhin aus bleibt, ist das Gerät wahrscheinlich defekt.
Read the full Q&A page
Martin war
I bought and installed 3 devices. Now all 3 devices are flashing, the top 3 LEDs brightly and the bottom 3 LEDs weakly. Is this correct?
Martin Krieg
Ich habe 3 Geräte gekauft und installiert. Jetzt blinken alle 3 Geräte , die oberen 3 LEDs hell und die unteren 3 LEDs schwach. Ist dies richtig so?
I bought and installed 3 devices. Now all 3 devices are flashing, the top 3 LEDs brightly and the bottom 3 LEDs weakly. Is this correct?<e/em>
Martin Krieg
Ich habe 3 Geräte gekauft und installiert. Jetzt blinken alle 3 Geräte , die oberen 3 LEDs hell und die unteren 3 LEDs schwach. Ist dies richtig so?
What do the flashing LED patterns on my RangeXTD devices mean, specifically when the top three are bright and the bottom three are weak?
Based on the RangeXTD manual, the LED indicators provide specific information about your device's status and signal strength. While the manual does not explicitly describe a "bright vs. weak" brightness difference between the top and bottom LEDs, the flashing and quantity of active LEDs are key indicators:
Troubleshooting Steps:
If all three devices are flashing simultaneously, they may have lost their connection to the primary router. If the signal indicator shows fewer than 2 levels (LEDs), the manual suggests finding a new location closer to the router. To resolve this, you can try resetting the devices by holding the Reset button for 10 seconds until the indicators turn off, then re-run the setup process.
Read the full Q&A page
Hello, unable to install my Range XTD. When I plug it into a wall outlet no lights come on.
Bonjour impossible d’installer mon Range XTD. Quand je le branche dans une prise murale aucun voyant s’allument.
Bonjour impossible d'installer mon Range XTD. Quand je le branche dans une prise murale aucun voyant s'allument.
Why are there no lights on my RangeXTD WiFi Range Extender when I plug it in?
If your RangeXTD WiFi Range Extender shows no lights when plugged into a wall outlet, please try the following troubleshooting steps:
If the POWER/WPS LED remains OFF after these steps, the device is not receiving electrical power and may be defective. According to the manual, the POWER LED must be ON to indicate the device is powered on.
Read the full Q&A page
1/24/2022: Rec’d my RANGEXTD today, I’ve been in Avionics & personal computers since the early 60’s, so being ‘old school’ was trying to enlarge the instructions full sizes (8.5×11), but decided to look them up O/L instead. When I got to the comment section, there were questions in English, but the answers were in German. Please tell me how that helps us English speaking customers??
Why are the answers in the comment section in German when the questions are in English, and where can I find English instructions for the RangeXTD?
We apologize for any confusion caused by language settings in the community comments. Manuals+ serves a global audience, and sometimes automated translations or user-submitted content may appear in different languages. However, the primary manual for the RangeXTD WiFi Range Extender on this page is provided in English.
Since you mentioned needing larger, readable instructions, you can follow these key steps for the most common setup (Repeater Mode):
RangeXTD. Open your browser and type192.168.7.234into the address bar. Use the default passwordadminto log in and follow the setup wizard.If you need a full-size printable version, you can use your browser's print function (Ctrl+P on Windows) while viewing this post to generate an 8.5x11 version of the digital manual.
Read the full Q&A page
Instructions are not easy get Wi-Fi good signal no internet connection can’t get anybody to f****** call me to help me out to find out why I can’t get internet if I have a strong signal
Why do I have a strong WiFi signal but no internet connection with my RangeXTD extender?
If you have a strong WiFi signal but no internet access, it usually means your RangeXTD is successfully broadcasting a signal to your device, but it is not successfully communicating with your main router or the internet source. Follow these steps to resolve the issue:
192.168.7.234(default password:admin). Go to the Repeater settings and ensure you have selected your home WiFi SSID and entered the correct password for your main router. If the password is wrong, the extender will show a strong signal but won't be able to pass data.Read the full Q&A page
I purchased this product because I thought for it’s use and how easy the installation woud be. Yet, this product isn’t as easy. I tried for 2 days trying to understand the simplicity in installing and have given up. I will try again in a few days and hopefully I will be successful. If not I wasted my money on like most product is shows are simple and easy to install, when it really isn’t that easy.
How do I install and set up the RangeXTD WiFi Range Extender?
Setting up the RangeXTD can be done in several ways. The easiest method is using the WPS Button, but you can also configure it manually via a web browser.
Method 1: WPS Setup (Easiest)
Method 2: Web Browser Setup
192.168.7.234into the address bar.admin.Troubleshooting Tips
Read the full Q&A page
I am able to connected to extender but internet is not available. I have reset device. It only works when device is connected to router with cable. Solution please.
Why does my RangeXTD extender connect to my device but provide no internet access unless it is wired to the router?
If your RangeXTD works via Ethernet cable but not wirelessly, it likely means the Repeater Mode is not correctly configured to bridge with your main router's signal. Follow these steps to resolve the issue:
RangeXTD.192.168.7.234(Password:admin).Read the full Q&A page