STARSTREAM Stream Box Pro Kit

Specifications
| Mounting hardware | 4 included 10/32 bolts |
| Power wire polarity | Red = Positive, Black = Ground |
| Power source | 12v power source |
| WiFi naming requirement | Rename WiFi to match exact credentials printed on the side of the StreamBox |
| Audio connection (optional) | 3.5mm auxiliary connector to back of main GoPro camera |
Product Description
- Everything you need to Live Stream to YouTube, Facebook, Instagram, Twitch or any other streaming platforms.
- Live Stream your Race from your Racecar, Your fishing trip from your boat, Storm Chasing from your Rig, and so much more!
- These kits have been proven in the most intense environments in motorsports such as the Baja 1000!
Installation & Setup
- Mount the StreamBox in a secure location with the 4 included 10/32 bolts using the provided template below. a. Recommended mounting: underside of vehicle roof or a secure place away from water or other harsh elements.
- Place where you can see the lights on top of the box, Green lights mean that you are Live.
- Place where you can easily reach Power button to turn on/off
Connect Power Wire
- Connect Power Wire (Red = Positive, Black = Ground) to 12v power source. a. Recommended straight to battery cut-off switch.
- If connecting to external switch you can also leave the StreamBox button in the “on” position at all times.
Mount Cameras
- Mount Cameras securely to vehicle in your preferred position.
- Your Cameras are “ready to go”, DO NOT insert battery or SD card.
- Plug in supplied Media cables to StreamBox
- If you have audio from an external source such as an In-Car radio, plug in the auxiliary (3.5mm) plug into the back of your main GoPro camera
Rename your WiFi
- Rename your WiFi to match the information on the side of the StreamBox.
- If using a Starlink visit this article for help on renaming the WiFi in the Starlink App: http://store.starstream.pro/pages/starlink-wifi-setup
Turn on VehicleInitiate the system startup sequence once network configuration is ready.
- Power on the vehicle (12v power source), then turn on the StreamBox.
- The StreamBox lights will turn RED initially, and you will hear the GoPro cameras power on.
- Wait for the StreamBox status lights on top of the unit to turn Green. Once green, you are Live!
View your Live StreamAccess your live feed using your mobile device.
- Scan the QR Code located on the inside of your Star Stream kit box and follow the step-by-step setup instructions.
Tag us anytime so we can share all of your Rad Experiences & Journeys! @starstreampro
Safety & Power Requirements
Important!
- Make sure your Starlink account is set to Global Priority 50GB in your Starlink Account.
- Starlink must be wired directly to battery (or battery switch) of vehicle for consistent power, cannot be wired to any other electronics, PDM, or Switch Panel, this will interrupt the power.
- If your Starlink does not have enough power your Live Stream will NOT work properly.
StreamBox Installation Template

Troubleshooting
- Status lights do not turn Green: Power up the vehicle first and then turn on the StreamBox. The manual states the lights turn RED initially and turn Green when Live.
- Live Stream does not function properly: Confirm your Starlink account is set to Global Priority 50GB in Starlink Account settings.
- Power interruptions or insufficient power: Ensure Starlink is wired directly to the vehicle battery (or battery switch) and not shared with other electronics, PDMs, or Switch Panels. Sharing power can cause interruptions and prevent proper Live Stream operation.
- WiFi connection issues: Rename your WiFi to match the exact credentials printed on the side of the StreamBox.
Documents / Resources
![]() | Stream Box Pro Kit |
References
- store.starstream.pro/pages/starlink-wifi-setupstore.starstream.pro
- starstream.prowww.starstream.pro
- User Manualmanual.tools
Published: September 14, 2026
Updated: September 15, 2026

