Zykronix Symphony XL 11.6 Inch Touch Panel Tlhophiso Tataiso

Zykronix Logo

Symphony XL

E kenyelelitsoe lebokoseng

  • 1ea Device
  • 1ea Mounting bracket
  • 4ea Mounting screws

Selelekela

To install the device you will also need one of the following electrical junction boxes or low-voltage brackets.

Electrical Junction Boxes

Litaelo tsa bohlokoa tsa polokeho

Read, understand and follow ALL safety and installation instructions included in this manual. Failure to follow the included documentation may damage the product and will void the manufacturer’s warranty. Follow ALL installation guidelines included with the product. Installation of the product in high humidity environments, in close proximity to heat sources and/or non-recommended locations WILL impede, interfere and/or damage the intended operation of the product. Only use attachments and accessories which have been specified for use by the manufacturer. The use of abrasive, liquid or solvent-based cleaning fluids WILL damage the product. Product Servicing may ONLY be completed by authorized or certified service centers & personnel. For a complete list of product servicing options, please follow instructions included in the product documentation and/or contact the original manufacturer for details.

Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela karolo ea 15 ea Melao ea FCC.

Meeli ena e etselitsoe ho fana ka ts'ireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo. Sesebelisoa sena se hlahisa, se sebelisa ebile se ka hlahisa matla a maqhubu a seea-le-moea, 'me haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi likhokahanong tsa seea-le-moea. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e mpe kamohelong ea seea-le-moea kapa thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

  • Khutlisa kapa u fallise lenakana le amohelang.
  • Eketsa karohano lipakeng tsa lisebelisoa le seamohedi.
  • Kopanya lisebelisoa ka sehokelo sa potoloho e fapaneng le eo seamoheli se hokahantsoeng le eona.
  • Ikopanye le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea / TV bakeng sa thuso.

Device – Overview

Overview

Note: Only Symphony XL equipped with hue lights.

Ho rera ho kenya

The device is designed to be wall mounted in either Portrait or Landscape orientation, or on tabletop with stand.

Ho rera ho kenya

Ho kenya sesebelisoa

Ho kenya sesebelisoa

A. Mounting height

The recommended mounting height for the device is 57”- 65” (145 cm -165 cm) from the finished floor to the center of the unit.

B. Landscape/Portrait mounting

Device can be mounted and oriented in Portrait or Landscape.

C. Installing the device mounting bracket

The device package includes a stainless steel mounting bracket that MUST be used for installation. Please note the mounting bracket in the box is designed for the US standard 2-gang and supplied Arlington mounting ring supplied in the box. You can order additional stainless steel mounting brackets for UK or European electrical boxes. Verify that the bracket is level before tightening the captive screws on the device. (US mounting bracket included in the box)

Installing the device mounting bracket

D. Connecting the device to power

The device is designed to be powered over the Ethernet connection (PoE) or by connecting a 24Vdc power supply (not included), but not both. If both the PoE and a 24Vdc power supply are connected, the device will draw power from the 24V DC source.

PoE mabapi

PoE connection requires IEEE 802.3af standard. Utilize a network switch or PoE injector that meets this standard. Connect the device using a standard T568A or T568B Ethernet cable from the network switch to the LAN/PoE jack on the back of the device.

PoE mabapi

Phepelo ea motlakase ea 24V DC

You can provide power locally or remotely to device by utilizing a 24V DC power supply (not included). Please note that running the wire through the wall in accordance with local codes when powering locally. If powering remotely, please ensure to use wire of adequate gauge for the length of the run. Please use approved 24V DC power supply.

Verify the polarity of the barrel connector on your power supply before connecting it to the device. The center pin of the device power connector is positive and the outer ring is negative. If the wire is extended, please ensure that the routing is in compliance with local codes.

Plug the connector into the device DC jack on the back of the device.

Plug the connector into the device

Powering up the device

Powering up the device

The device will automatically power on when power is applied. Wait for the unit to boot up. When it’s connected to a network switch by Ethernet cable, the device will acquire a network address via DHCP and automatically connect to the system.

Temperature ranges/humidity

mocheso

E. Mounting the device

  1. Loosen the captive screws of the unit first. Screws should not be moved apart from the unit. Please meet the indicated line.
  2. Align the mounting frame hooks with the mounting slots and gently pull the unit down the mounting bracket. Make sure the mounting hooks are properly engaged.
  3. To complete the installation, tighten the 2-captive screws on the bottom part of unit, to secure the device on the mounting bracket.
  4. For Portrait orientation, rotate mounting bracket and 90 degrees in counterclockwise direction before installation.

Ho beha sesebelisoa

Ho tlosa sesebelisoa

Using a precision Philips head screw driver to loosen the 2-captive screws on the device, then slightly pull straight up from the mounting frame to disengage the unit.

Ho tlosa sesebelisoa

Setting screen orientation

On the touch panel setup screen, select Landscape or Portrait display modes. Press Start device to launch the user interface.

To change orientation:

Setting screen orientation

  • Remove power from device.
  • Re-apply power to device.
  • Select landscape or portrait orientation.

Thank you for including the device as part of the user interface strategy for your customer. The device has been designed to provide years of trouble free operation when wired and installed properly. The device is designed for installation in low humidity indoor environments and should never be installed outdoors or in high humidity areas.

Liphetoho kapa liphetoho tse sa amoheloeng ka ho hlaka ke mofani oa sesebelisoa sena li ka hlokisa matla a mosebelisi ts'ebeliso ea lisebelisoa.
Sesebelisoa sena se latela Karolo ea 15 ea Melao ea FCC. Tshebetso e itshetlehile hodima maemo a mabedi a latelang: (1) sesebediswa sena se ke ke sa baka tshitiso e kotsi, mme (2) sesebediswa sena se lokela ho amohela tshitiso efe kapa efe e amohetsweng, ho kenyeletswa le tshitiso e ka bakang tshebetso e sa batleheng.

Tlhokomeliso ea RF
Sesebelisoa sena se tlameha ho kengoa le ho sebetsoa ho latela litaelo tse fanoeng 'me li-antenna (s) tse sebelisitsoeng bakeng sa phetiso ena li tlameha ho kengoa ho fana ka sebaka sa karohano sa bonyane 20 cm ho batho bohle mme ha ea lokela ho lula hammoho kapa ho sebetsa hammoho lenakana efe kapa efe kapa fetisang. Basebelisi ba ho qetela le li-installer ba tlameha ho fana ka litaelo tsa ho kenya li-antenna le maemo a ts'ebetso ea fetisang bakeng sa ho khotsofatsa ts'ebetsong ea ts'ebeliso ea RF.

Canada, Industry Canada (IC) Litsebiso
Sesebelisoa sena se lumellana le maemo a RSS a sa lumelloeng ke laesense ea Canada.
Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) sesebelisoa sena se kanna sa se sitise, mme (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa le tšitiso e ka bakang ts'ebetso e sa rateheng ea sesebelisoa.

Consult the dealer or contact [imeile e sirelelitsoe] bakeng sa thuso 

English V1.1

Litokomane / Lisebelisoa

Zykronix Symphony XL 11.6 Inch Touch Panel [pdf] Tataiso ea ho kenya
LBEE5ZZ1PJ, 2AGRR-LBEE5ZZ1PJ, 2AGRRLBEE5ZZ1PJ, Symphony XL 11.6 Inch Touch Panel, Symphony XL, 11.6 Inch Touch Panel

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa.