YARILO PRO Yarilo PixelGO Controller Led Pixel Strip
FEELAVIEW
Yarilo PixelGO e etselitsoe ho laola litheipi tsa pixel tsa LED. Sesebelisoa se hokahane le marang-rang a lehae mme se fumana data ka protocol ea ArtNet. Mefuta e fapaneng ea litheipi tsa pixel (1-Wire SPI, 2-Wire SPI) e ka sebetsa ka nako e le 'ngoe. Ho fihla ho liphetho tse ikemetseng tse 2 ho Mokhoa oa 1-Wire SPI. Kakaretso ea lipikselse tse 2720. E ahiloeng web segokanyimmediamentsi sa sebolokigolo lumella u ho habonolo beha diparamente tsa sesebediswa le ntjhafatsa firmware ea molaoli. LE e bonts'a mokhoa oa hona joale oa ho sebetsa.
LIEKETSENG TS'OANELO
KAKARETSO VIEW
- Sehokelo sa LAN
- Khutlisa konopo / reset konopo
- Letšoao la LED
- Boema-kepe ba ho hokahanya likhoele tsa LED
- Screw terminal
Setšoantšo sa 1 - Kakaretso view ea Yarilo PixelGO
KHOPALA LIPIKOSE
- Pele o hokela lesela la LED, khaola motlakase ka botlalo ho Yarilo PixelGO!
- Li-strips tsa LED li hokahane le "4-pin" screw terminal. Etsa bonnete ba hore u hlahloba ho tiea ha lithapo.
- Ela hloko bolelele bo boholo ba terata lipakeng tsa Yarilo PixelGO le strip ea LED. E le molao, bakeng sa lipikselse tsa 1-Wire (WS2811, WS2812, WS2815 le tse tšoanang) sebaka sena ha se fete 5m.
- Liphetho tsa taolo li ka sebelisoa le ho hlophisoa ho tlhophiso efe kapa efe, bakeng sa mefuta e fapaneng ea likhoele tsa LED, palo ea pixels le lebelo.
- Ela hloko khokahano e nepahetseng ea GND, VCC, A le B.
- Kenya terminal ho Yarilo PixelGO 'me u sebelise matla.
LIKHETHO TSA KHOPO EA LITŠOANTŠISO TSA LED
- Yarilo PixelGO e ts'ehetsa likhetho tse 'maloa tsa ho hokahanya likhoele tsa LED:
- Ho hokela mohala o le mong oa 1-Wire SPI
- Ho hokela likhoele tse peli tsa 1-Wire SPI (1-Wire SPI + 1-Wire SPI)
- Ho hokela mohala o le mong oa 2-Wire SPI
HO HOKOLA LEQEPHA LA LED LE NANG LE LENGOE LA 1-WIRE SPI
- Wire SPI LED strip ke lesela la LED le sebelisang mohala o le mong feela oa data bakeng sa khokahano, VCC le GND.
- Yarilo PixelGO e ts'ehetsa likhoele tsa LED tsa 1-Wire SPI tse thehiloeng ho lichipisi: WS2811, WS2812,
- WS2812B, WS2813, WS2815, WS2851, APA104, SK6812.
- Re khothaletsa ho sebelisa Port A ho hokahanya likhoele tsena tsa LED.
- E HOKAHA LITABA TSE PELI tsa 1-WIRE SPI LED (1-WIRE SPI + 1-WIRE SPI)
- Yarilo PixelGO e na le likou tse peli tsa tlhahiso (A le B) bakeng sa ho hokahanya likhoele tsa LED tsa SPI tsa terata e le 'ngoe. Hoa khoneha ho hokela mefuta e fapaneng ea likhoele tsa LED boema-kepeng bo bong le bo bong.
- HO HOKOLA LEQEPHA LA LED LE NANG LE LENGOE LA 2-WIRE SPI
- 2-Wire SPI LED strip ke lesela la LED le sebelisang mohala o le mong oa data, mohala o le mong oa oache, VCC le GND.
- Yarilo PixelGO e ts'ehetsa likhoele tsa LED tsa 2-Wire SPI tse thehiloeng ho lichipisi: P9813, APA102, SK9822.
- Ha o hokela likhoele tsena tsa LED, Port A e sebelisoa ho hokahanya mohala oa data le Port
- B e sebelisoa bakeng sa mohala oa oache.
- Ho web-interface ha o tobetsa konopo "Show wiring", merero ea hajoale ea khokahano ea strip ea LED e tla hlahisoa.
KHOKELO PHEKO EA MATLA
Selaoli se tsamaisoa ka sehokelo sa screw sa 4-pin bakeng sa strip ea LED. Ela hloko polarity e nepahetseng! Yarilo PixelGO e na le tšireletso e hahelletsoeng ka har'a matla a polarity. Leha ho le joalo, polarity e fosahetseng e ka ntša lesela la LED.
Tšōmo
- Lithapa tsa pixel tsa LED li ka hokahana ka letoto, ka hona li eketsa bolelele ba tsona kaofela. Tabeng ena, ke habohlokoa ho khetha motlakase o nepahetseng. Likhetho tse 'maloa tsa khokahano lia khoneha:
- Khetho ea 1. Motlakase o kopantsoe ho Yarilo PixelGO
- Khetho ea 2. Motlakase o na le matla a lekaneng a ho matlafatsa ketane eohle ea litheipi 'me o kopantsoe qetellong ea ketane.
- Khetho ea 3. Letlapa le leng le le leng la pixel la LED le tsamaisoa ho tsoa mohloling oa lona oa matla.
Matla a fanoa hang feela. Motlakase o hokahane pakeng tsa lihlopha tsa pixel tsa LED le PixelGO. Haeba ho sebelisoa motlakase oa 9V kapa o phahameng, o ka hokahanya PSU ho tloha qetellong ea lesela la pixel la LED.
QALEHO MOSEBETSI
- Hokela thapo ea matla le matla.
- Litlhophiso tsa marang-rang tsa Yarilo PixelGO:
- IP Aterese 192.168.1.170
- Network Mask 255.255.255.0
- Etsa bonnete ba hore Yarilo PixelGO le karete ea hau ea marang-rang li ho subnet ena. Bula sebatli sa hau 'me u kenye 192.168.1.170 bareng ea aterese. E hahiloeng web interface e bula.
- Ka har'a mabokose a Port A le Port B, khetha mofuta oa pixel le nomoro eo u e batlang. Tobetsa "Save Settings".
- Yarilo PixelGO e nka bokahohle ba 16 Art-Net. Sehlahisoa se seng le se seng se nka li-universe tse 8 'me se khona ho hlahisa lipikselse tse fihlang ho 1360 RGB le lipikselse tsa 1024 RGBW. Ho etsa 'mapa
- Sebaka sa Universe se bonts'a hore na ke bokahohle bo fe ba karolo e itseng. Hoa khoneha ho beha mefuta e fapaneng bakeng sa lihlahisoa tse 'maloa. Lintlha li tla kopitsoa liphethong.
- Ha Yarilo PixelGO e fumana data, LED e panya ka botala.
WEB PUSELETSO SEKONYELAVIEW
Setšoantšo sa 2 Web segokanyimmediamentsi sa sebolokigolo Yarilo PixelGO
- Setšoantšo se bontša ponahalo ea Web-sebopeho sa Yarilo PixelGO.
- Ntho ea menu. Sehokelo sa leqephe la lapeng
- Ntho ea menu. Khokahano ea leqephe la ntlafatso ea firmware (sheba Firmware Upgrade)
- Thibelo ea litlhophiso tsa marang-rang:
- Litlhophiso tsa Art-Net
- Boema-kepe ba 1. Ho beha tlhahiso ea pixel ea pele (Port A). Boema-kepe bo sebetsa ka mokhoa oa 1-Wire SPI
- Litlhophiso tse tsoetseng pele bakeng sa strip ea pixel ea LED ka mokhoa oa 1-Wire SPI.
- Boema-kepe ba 2. Ho beha koung ea pixel ea bobeli (Port B). Boema-kepe bo sebetsa ka 1-Wire SPI kapa
- Mokhoa oa SPI oa mohala. Haeba khetho ea 2-Wire SPI e khethiloe, port A ka boeona e ea boemong bo sa sebetseng.
- Setting e tšoana le ntlha ea 5. Ho 2-Wire SPI mode, ntho ea menu "Pixel Advance
- Control (2-Wire)” e beha maqhubu a theipi
- Boloka Litlhophiso. Konopo ho boloka litlhophiso.
- Khutlisa Defaults. Ho khutlisetsa litlhophiso ho li-default tsa feme.
- Lintlha tsa Node. Thibelo ea tlhahisoleseling mabapi le sesebelisoa, aterese ea MAC, mofuta oa firmware le hardware.
LIEKETSENG FIRMWARE
- Sesebelisoa se tšehetsa mokhoa o bonolo oa ho ntlafatsa software ka ho web segokahanyi.
- Tlanya ntho ea menu ea Firmware Update, khetha firmware file ebe o tlanya Upload
Tsamaiso eohle e tla iketsa.
Yarilo PixelGO molaoli o khona ho lula a sebetsa maemong ha nakong ea ntlafatso ea firmware matla a tima kapa khokahano ea marang-rang e lahlehile. Ha o kenya, botšepehi ba firmware bo hlahlojoa. Haeba phoso e etsahala, sesebelisoa se qala ka mokhoa oa ho hlaphoheloa. Sheba Mokhoa oa ho Khutlisa
PUSELETSO MOHAPI
- Mokhoa oa ho khutlisa o sebelisoa ho lokisa liphoso tse etsahetseng nakong ea ntlafatso kapa bobolu bo bong ba software.
- Ho kenya mokhoa, tima matla a sesebelisoa. Tobetsa konopo (2) bona Setšoantšo sa 1 'me u sebelise matla.
- Sesebelisoa se tla qala mokhoa oa ho hlaphoheloa. Leseli la letšoao la LED le tla ba khubelu. Aterese ea IP 192.168.1.170.
- Haeba ts'ebetso ea ntlafatso ea software e hloleha, sesebelisoa se tla qala ka mokhoa oa ho hlaphoheloa (sesupo se khubelu).
- Ho khantša sesebelisoa ka mokhoa ona, o tlameha ho sebelisa ts'ebeliso ea tftp.exe.
Ka kamehla, ts'ebeliso ea tftp.exe e koetsoe. Ho e nolofalletsa, etsa mehato e latelang.
- Tobetsa motsoako oa senotlolo + R, Fensetereng ea Phethahatso e bulang, thaepa (kopi le ho peista) OptionalFeatures ebe o tobetsa Enter.
- Fensetereng ea "Windows Components" e butsoeng, hlahloba karolo ea Client ea TFTP ebe o tobetsa OK.
- Kamora nako e khuts'oane, Windows e tla sebelisa liphetoho tse hlokahalang 'me TFTP Karolo ea bareki e tla buleloa.
- Khoasolla firmware ea morao-rao ea semmuso ho Yarilo.Pro ea semmuso websebaka https://yarilo.pro/en/controllers/pixel-controllers/yarilo-pixelgo Matha cmd.exe (+ R kenya cmd.exe). Eya ho directory ea firmware. E latelang, thaepa taelo: tftp -i 192.168.1.170 PUT PixelMiniUpdate_h3_0_2_3.bin moo PixelMiniUpdate_h3_0_2_3.bin e leng lebitso la file o jarollotse. Nakong ea ts'ebetso ea ntlafatso, letšoao la LED le tla qala ho panya. Kamora nakoana sesebelisoa se tla qala hape ka mokhoa oa ts'ebetso.
NTHABISENG FEREKI
Ho seta botjha sesebelisoa ho li-setting tsa feme, tobetsa o hatelle konopo (2) (sheba Setšoantšo sa 1). Ka mor'a metsotsoana e 5 LED e tla benya bofubelu ka potlako ka metsotsoana e 'meli ebe sesebelisoa se tla khutlela ho litlhophiso tsa fektheri.
Litokomane / Lisebelisoa
 |
YARILO PRO Yarilo PixelGO Controller Led Pixel Strip [pdf] Bukana ea Mosebelisi Yarilo PixelGO, Controller Led Pixel Strip, Yarilo PixelGO Controller Led Pixel Strip, Led Pixel Strip, Pixel Strip, Strip |
