Recon Chat for PS4 Headset

TurtleBeach Recon Chat for PS4 Headset

Tataiso ea litaelo

PUSELETSO TLALI

  1. Recon Chat Headband (A)
  2. Recon Chat Earcup with Microphone (B)

PUSELETSO TLALI

ASSEMBLE THE RECON CHAT

ASSEMBLE THE RECON CHAT

IN-LINE CONTROLS

IN-LINE CONTROLS

  1. Mic Mute switch
    • Fetolela homute_button_black.png to mute the microphone.
  2. Buka ea Master
    • Adjust the master volume of the incoming chat audio.

PUSELETSO PS4

PUSELETSO PS4

  1. Eya ho Settings >> Devices >> Audio Devices.
      • Ipehele input & Lisebelisoa tsa Khumo ho Headset Connected to Controller.
      • Ipehele Phello ho li-headphone ho Chat Audio.
      • Ipehele Taolo ea Bolumo (Li-headphone) level to Maximum.
  2. khetha Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.

XBOX MOHLOMI E MONG

Hlokomela: The Recon Chat works with Xbox One Controllers with a 3.5mm headset jack. Other controllers require the Xbox One Headset Audio Controller.

1. Plug the headset into the Xbox controller.

XBOX MOHLOMI E MONG

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

3. Configure your settings as shown:

  • Ipehele Molumo oa li-headphone ho palo e kahodimodimo
  • Ipehele Mic Monitor ho oa hao rata ho bophahamo ba

Molumo oa li-headphone


Setupo sa Xbox

To set your Recon Chat For PS4 up for use with an Xbox console, please do the following. Please note this information applies to both the Xbox One and Xbox Series X|S consoles.

1. Plug the headset into the Xbox controller.

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

Xbox molaoli

3. Configure your settings as shown*:

  • Ipehele Molumo oa li-headphone ho palo e kahodimodimo
  • Ipehele Mic Monitor ho rata ho bophahamo ba

*The Headset Chat Mixer option will be greyed out; this headset will play chat audio only, so this setting is not needed for this particular headset.

configure

WINDOWS SONIC SURROUND SOUND

1. While in the Home screen, press the Xbox button on the controller. You’ll see the following screen:

WINDOWS SONIC

2. E-ea ho ea Profile & System Tab, and select “Settings".

Profile & System

3. Eya ho General >> Volume & Audio Output

Volume & Audio Output

4. Ho Semamedi sa Audio column (right side of the screen), set Headset Format ho Sonic ea Li-headphone tsa Windows.

Semamedi sa Audio


Setupo sa PlayStation

This article details the best way to set your Recon Chat for PS4 headset up for use with a PS4 or PS5 ho tšelisa.

PUSELETSO PS4

If you have a PS4/PS4 Pro console, please do the following.

PUSELETSO PS4

  1. Eya ho Settings >> Devices >> Audio Devices.
      • Ipehele input & Lisebelisoa tsa Khumo ho Headset Connected to Controller.
      • Ipehele Phello ho li-headphone ho Chat Audio.
      • Ipehele Taolo ea Bolumo (Li-headphone) level to Maximum.
  2. khetha Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.
PUSELETSO PS5

If you instead have a PS5 console, please do the following.

  1. Plug the headset into the aux port in the DualSense controller. Once you do this, the microphone function will automatically switch from the controller’s integrated mic to your headset.
  2. Eya ho Settings >> Sound >> Audio Output >> Output Device
      • khetha Headset Connected To Controller etsoe Sesebelisoa sa Output
      • Set Output to Headphones to Chat Audio
  3. Eya ho Settings >> Sound >> Volume >> Headphones
      • Ipehele Volume Control (headphones) level to palo e kahodimodimo
  4. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

Regulatory Compliance Statements for the EAR FORCE Reran Chat Model

Litsebiso tsa Tsamaiso ea Federal Communications Commission (FCC)

Class El Interference Statement

This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference M a residential installation. This equipment generates. uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Khutlisa kapa u fallise lenakana le amohelang.
  • Eketsa karohano lipakeng tsa lisebelisoa le seamohedi.
  • Kopanya lisebelisoa ka sehokelo sa potoloho e fapaneng le eo seamoheli se hokahantsoeng le eona.
  • Ikopanye le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea / TV bakeng sa thuso.

Tlhokomeliso ea FCC.

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: 1. Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me 2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Lipolelo tsa Canada ICES

Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. NMB-003 du Canada.

European Union and European Fair Trade Association (EFTA) Regulatory Compliance Declaration of Conformity Marking by this symbol:

CE indicates compliance with the Essential Requirements of the EMC Directive of the European Union 12014/30/EU). This equipment meets the following conformance standards:

Tšireletseho: EN 60950-1: 2006 +A11: 2009 + Al: 2010 +Al2: 2011 + A2: 2014 IT-Mark License), IEC 60950-1: 2005 (2nd Ed.) + Am 1: 2009 + Am 2: 2013 (CB Scheme Certificate), EN 50332-1: 2000, EN 50332-2: 2003, EN 71-3: 2013 ALso Licensed for Standards: UL 60950-1: 2007 R10.14, CAN/CSA-C22.2 No.60950-1-07 +41: 2011 + A2: 2014 Additional licenses issued for specific countries available on request

Mocheso: EN 55022: 2010 + AC: 2011, CISPR 22: 2008

maloetseng: EN 55024: 2010, CISPR 24: 2010, EN 61000-4-2: 2009, EN 61000-4-3: 2006 .A2: 2010, EN 61000-4-8: 2010

The products are Licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request.

Tikoloho: Moqolo o tlasetage Directive 2014/35/EU, RoHS 2011/65/EU. REACH 2006/1907/EC, WEEE 2012/19/EU. Packaging 94/62/EC. Toys Safety Directive 2009/48/EC

Ho lahlaLetšoao lena sehlahisoa kapa sephutheloana sa lona le bontša hore sehlahisoa sena ha sea lokela ho lahloa ka litšila tsa ntlo ea hau. Sebakeng seo, ke boikarabello ba hau ho lahla lisebelisoa tsa hau tsa litšila ka ho li fetisetsa sebakeng se khethiloeng sa pokello bakeng sa ho nchafatsa lisebelisoa tsa motlakase le tsa elektroniki. Pokello le tharollo ea lisebelisoa tsa hau tsa litšila ka nako ea ho li lahla e tla thusa ho boloka lisebelisoa tsa tlhaho le ho netefatsa hore e sebelisoa bocha ka tsela e sirelletsang bophelo bo botle ba batho le tikoloho. Bakeng sa tlhaiso-leseling e batsi ka moo o ka tlohelang litšila tsa hau hore li hloekisoe bocha, ka kopo ikopanye le molaoli oa lehae kapa moo o rekileng sehlahisoa sa hau

Ka kopo etela tse latelang URL bakeng sa kopi e felletseng ea Phatlalatso ea Tumellano:

http://www.turtlebeach.com/homologation  
This product is compliant with the Consumer Product Safety Improvement Act of 2008. Public Law 110-314 (CPSIA)


Download

TurtleBeach Recon Chat for PS4 Headset Instruction Guide – [ Download PDF ]


 

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa.