Litaba pata
1 timersshop V8.0 Multi Functional Timer Relay
2 Tlhahisoleseding ya Sehlahiswa
3 Tlhaloso ea Multi-functional Timer Relay
4 Bapisa mefuta ea Nako
5 Setšoantšo sa lithapo tsa nako
6 Mosebetsi
7 Sehlahisoa sa nako
8 Lenaneo la nako
9 Ho batle phoso
10 Litokomane / Lisebelisoa
10.1 Litšupiso
11 Related Posts

timersshop-logo

timersshop V8.0 Multi Functional Timer Relay

timersshop-V8-0-Multi-Functional-Timer-Relay-sehlahisoa-setšoantšo

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

  • Moqtagmefuta e fapaneng:
  • Boholo ba hona joale:
  • Mofuta oa tlhahiso:
  • Nako e fokolang:
  • Nako e kholo ea nako:
  • Tšebeliso ea hona joale e sa sebetse:
  • Mocheso lintlha:
  • E ntle kapa Sink (Fatše). Ho itšetlehile ka mohlala

Tlhaloso ea Multi-functional Timer Relay

Mojule oa ho lieha ha nako e nang le mesebetsi e mengata ke potoloho ea phetoho e nang le mesebetsi e mengata e sebelisoang hangata ea ho lieha nako. E nepahetse bakeng sa lits'ebetso tse ngata ho tloha ho itlosa bolutu ho ea ho taolo ea indasteri. Sebali sa nako se na le mesebetsi e fetang mashome a mararo e fapaneng ea nako e nang le bokhoni ba boikhethelo ba ho e qala ka ho sebelisa matla a ho kenya.tage ho terata e qalang. Mabitso a omileng a ka sebelisoa hape. Sebali sa nako se ka sebelisoa bakeng sa lits'ebetso tse makholo tse fapaneng ho tloha ho matla a liehang ho isa potolohong, ho fana ka matla ka mokhoa oa ho palama libaesekele, kapa ho theha potoloho ea nako e itšebetsang. Sebali sa nako se bonolo ho hokela le ho se hlophisa. Litlhophiso tsohle li bolokoa ka ho sa feleng mohopolong oa flash oa kahare. Nako e sebetsa le 3V ho isa ho 28V phepelo ea voltage 'me e khona ho sebetsa ho fihlela ho 5amp/10amp ea hona joale (ho itšetlehile ka mohlala). Sena se etsa hore timer e sebetse lits'ebetsong tse fapaneng. Nako e phahameng ea sebali sa nako e ka atolosoa ka ts'ebeliso ea relay e kantle. Sebali sa nako se ka sebetsa ka mokhoa oa Low Power o loketseng lits'ebetso tse tsamaisoang ke betri. Diode e hahiloeng ka har'a fly-back e lumella hore ho be le khokahanyo e tobileng ea meroalo ea inductive.

Moqtagmefuta e fapaneng: 3-18 V DC - 5 A version 6-28 V DC - 10 A version
Boholo ba hona joale: 5 A kapa 10 A
Mofuta oa tlhahiso: E ntle kapa Sink (Fatše). Ho itšetlehile ka mohlala
Nako e fokolang: 0.01 motsotsoana
Nako e kholo ea nako: 400 matsatsi
Tšebeliso ea hona joale e sa sebetse: 800µA

or

50 µA (ka mokhoa o LOW POWER tlas'a maemo a itseng)
Lintlha tse itekanetseng -40 C + 80 C

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (1)

Tlhokomeliso

  • Se ke oa khutsufatsa sebali sa nako fatše. E ka baka mocheso o feteletseng, ho ka 'na ha e-ba le mocheso o feteletseng oa mochine le mosi.
  • Se ke oa feta matla a hajoale a sebali.
  • Se ke oa khutlisa polarity ea phepelo ea motlakase. E ka etsa hore likarolo tsa ka hare tsa sebali sa nako li hlolehe 'me li futhumale ho feta tekano.
  • Se ke oa beha sebali sebakeng se chesang se etsang hore se fete maemo a sebetsang a boemo bo itekanetseng bo itseng.
  • Se ke oa hakolla fatše ho sebali sa nako ha u ntse u le tlas'a matla.

Bapisa mefuta ea Nako

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (63)

Phapano ke efe lipakeng tsa V8 le V9?
V9 e na le oache e nepahetseng haholoanyane e nang le +/- 2sec feela ka letsatsi le tokiso ea software.

V8 e na le +/- 2% e feto-fetohang.

V9 PCB e koahetsoe ka mokhoa o hlophisitsoeng e fanang ka tšireletso e eketsehileng.

Setšoantšo sa lithapo tsa nako

Sebali sa nako se hokelang timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (2)

*** Bakeng sa litaelo tsa morao-rao tsa ho kenya le livideo etela http://doc2.us/main View Timer's Cookbook ho http://timers.shop/Timer-Cook-Book_ep_43-1.html

Ho fetolela sebali sa nako ka tlhahiso ea Sink (Ground).

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (3)

Ho hokela sebali sa nako ho sebatli.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (4)

Tlhokomeliso!!! Ha o kenya sebali sa nako ho tsoa ho sebatli ha se hokelle mojaro kaha mojaro o ka tlatsa matla a fanoeng ke USB. Se ke oa hokela matla a kantle ho sebali-nako kaha motlakase o tla khutlisetsoa mohloling oa motlakase oa USB. E ka senya mohloli oa matla oa USB hammoho le potoloho ea moqapi.

Ho hokela sebali sa nako ho sebali bakeng sa mananeo a in-circuit.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (5)

Tlhokomeliso!!! Ha u matlafatsa sebali ho tsoa mohloling o kantle, u se ke oa hokela mohala oa motlakase oa moetsi oa lenaneo. E ka senya mohloli oa matla oa USB hammoho le potoloho ea moqapi.

Mosebetsi

Ho utloisisa Mosebetsi oa ho lieha ha nako ea ho lieha ha nako.
Ho utloisisa mesebetsi ea nako eohle ea ho lieha ha nako e fumanehang ka nako e sebetsang e mengata e ka ba mosebetsi o tšosang. Nakong ea moralo oa potoloho o nang le phepelo ea nako le mefuta e fapaneng ea litlhophiso tsa nako, lipotso tse kang hore na ke eng e qalang ts'ebetso ea ho lieha ha nako, na nako e qala ka ts'ebeliso ea lets'oao la motlakase kapa leqhubu, hore na matla a tsoang a lokela ho lula nako e kae, joalo-joalo, a ka hlaha 'me a tlameha ho arajoa.

Sebali sa nako ke potoloho ea taolo ea logic ho laola matla a tsoang ho latela liketsahalo. Ka tloaelo, nako e qalisoa kapa e hlahisoa ke e 'ngoe ea mekhoa e' meli:

  • Tšebeliso ea matla voltage
  • Lets'oao le phahameng kapa le tlase la ho qala

Letšoao la trigger e ka ba e 'ngoe ea tse latelang:

  • Sesebelisoa sa taolo (mabitso a omileng): switch switch, push-button, switch ea float
  • Moqtage (motlakase oa matla): tlhahiso ea lets'oao ho tsoa sesebelisoa se seng, lets'oao la matla

Ho thusa ho utloisisa tšebetso ea nako a re shebeng mantsoe a tloaelehileng a sebelisoang bukeng ena kaofela.

  • Keletso Voltage - matla voltage sebelisitsoe ho sebali sa nako. Ho ipapisitse le ts'ebetso e khethiloeng, phallo ea voltage tla qala ketsahalo ea nako kapa e fe sebali nako hore se be malala a laotsoe ho amohela lets'oao la ho qala.
  • Letšoao la ho Qala - mesebetsing e itseng ea nako, leqhubu le sebelisoa ho qala ketsahalo ea nako ka mor'a molumo oa ho kenyatage se e sebelisitsoe. Joalo ka ha ho boletsoe kaholimo, "trigger" ena e ka ba sesebelisoa sa taolo (switch touch switch) kapa "power trigger" (voltagle).
  • Sephetho – tlhahiso voltage ho tloha ho sebali sa nako. Nako ea tlhahiso voltage e laoloa ke ketsahalo e khethiloeng ea nako le mokhoa oa ho qala.

Ka tlase (setšoantšo sa 1) ke tlhaloso ea mesebetsi ea nako. Chate ea nako e bonts'a kamano lipakeng tsa Input Voltage, Letšoao la Trigger, le Output. Hlokomela hore Trigger Signal ke boikhethelo bakeng sa mesebetsi e meng ea nako le tlamo ho ba bang. Pele o kena lits'ebetsong tsohle tse fumanehang, sheba ea pele ka botlalo.

Setšoantšo sa 1.

# Mosebetsi Tshebetso
1 TSIETSO Holim'a kopo ea ho kenya voltage, tieho ea nako (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso e matlafatsoa. Kenyelletso voltage tlameha ho tlosoa ho tsosolosa nako ea ho lieha ha nako le ho fokotsa matla a tlhahiso.
Setšoantšo sa Marang-rang: https://wavedrom.com/editor.html

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (6)

Mosebetsi oa nako #1 o ON DELAY, o lumella ho fana ka matla ka mor'a nako e itseng (t). Ho na le lichate tse peli tsa nako, e 'ngoe e se nang mochini le e 'ngoe e nang le mochini. Khetho ea trigger e ka etsoa nakong ea tlhophiso ea nako. Ha re shebeng chate ea pele moo sebali se hlahisoang ke phallo e fanoengtage. Hang ha matla a fanoe ho sebali sa nako, ho lieha ha nako (t) ho qala, qetellong ea tieho ea nako (t) tlhahiso e matlafatsoa 'me e lula e le teng ho fihlela matla a timer a tlosoa. Ho tlosoa ha motlakase ho tsosolosa potoloho ea nako, 'me nako e loketse potoloho e' ngoe. Chate ea bobeli e sebetsa ha khetho ea trigger e khethoa. Tabeng ena, trigger on High (positive) voltage khethiloe. Tse ling mabapi le likhetho tsa trigger li ka fumanoa hamorao bukeng ea tataiso. Kamora ho sebelisa matla, sebali se loketse ho amohela lets'oao la ho qala. Ha trigger e sebelisoa, nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t) tlhahiso e matlafatsoa 'me e lula e le teng ho fihlela matla a timer a tlosoa. Tšebeliso e 'ngoe ea "trigger" nakong ea tieho ea nako (t) kapa nako e matlafalitsoeng ea tlhahiso, ha e ame ts'ebetso ea nako. Ke ts'ebeliso ea pele feela ea "trigger" e bohlokoa.

Litšoantšo li ka boela tsa e-ba joalo viewe hlophisitsoeng kapa e hlophisitsoeng inthaneteng ka https://wavedrom.com/editor.html leqephe.

Tafole ea tšebetso ea nako e nang le lichate
(Hlokomela hore nomoro ea ts'ebetso # e tla sebelisoa nakong ea tlhophiso ea nako.)

Setšoantšo sa 2.

# Mosebetsi Tshebetso
1 TSIETSO Ha ho kenya voltage sebelisoa, ho lieha ha nako (t1) ho qala. Kamora hore nako ea ho lieha (t1) e phethe, tlhahiso e ba matla. Ho seta botjha relay ya tieho ya nako le ho tima sephetho, phallo ya voltage tlameha ho tlosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (7)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: "output", wave: 'lh……lh…. ke},

{},{},

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: “trigger”, wave: 'lHl……Hl… ' },

{lebitso: “sephetho”, wave: 'l..h…..l..h… l' }

]}
2 KHABANE TS'OANE Holim'a kopo ea ho kenya voltage, tlhahiso e ba matla, e qalang nako ea ho lieha ha nako (t1). Hang ha nako ea ho lieha (t1) e fela, tlhahiso e tlosoa matla. Ho seta botjha phetiso ya tieho ya nako, leqhubu la ho kenyatage tlameha ho khaoha.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (8)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: “sephetho”, wave: 'lh..l…..h..l…' },

{},{},

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: “trigger”, wave: 'l.Hl…….Hl…. '},

{lebitso: “sephetho”, wave: 'lh.l…..h..l… '}

]}
# Mosebetsi Tshebetso
7 LIEHETSOE KHABANE

Single Cycle

 Holim'a kopo ea ho kenya voltage, nako ea pele ea ho lieha (t1) e qala. Ka mor'a ho phethoa ha nako ena ea pele ea ho lieha (t1), tlhahiso e ba matla 'me e lula e le matla ka nako ea tieho ea bobeli (t2). Ka mor'a ho qeta nako ena ea bobeli (t2), tlhahiso e tlosoa matla. Ho qala bocha

nako ea ho lieha ha nako, ho kenya letsohotage tlameha ho tlosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (9)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: “output”, wave: 'l..hl……hl… ' },

{},{},

{lebitso: “matla”, wave: 'lh…….lh….. l' },

{lebitso: “trigger”, wave: 'l.Hl…….Hl…. '},

{lebitso: “output”, wave: 'l…hl……hl. '}

]}
8 PHETHA TS'ELA

(Ka Pele)

 Ha ho sebelisoa voltage, ho lieha ha nako (t3) ho qala, 'me tlhahiso e matlafatsoa bakeng sa ho lieha ha nako (t1). Qetellong ea tieho ea nako (t1), tlhahiso e felloa ke matla 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t3). Qetellong ea nako ea ho lieha (t3), tlhahiso e matlafatsoa 'me tatellano e pheta ho fihlela ho lieha ha nako (t3) ho phethoa.

t3 e behiloeng ho 0 e tla pheta potoloho ka ho sa feleng.

t4 e sebelisoa ho kenya mohato o sa sebetseng. t4 e behiloeng ho 0 e tla qobella potoloho ho fela ha t3 e fela.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (10)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: "output", wave: 'lhlhlhlhlhlhlhl..'},

{},{},

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl…………' },

{lebitso: “output”, wave: 'l.hlhlhlhlhlhlhlhl.' }

]}
9 PHETHA TS'ELA

(Tlosa Pele)

 Ha ho sebelisoa voltage, ho lieha ha nako (t3) ho qala, 'me ho lieha ha nako ea pele (t1) ho qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t2). Qetellong ea nako ea ho lieha (t1), tlhahiso e tlosoa matla 'me tatellano e pheta ho fihlela ho lieha ha nako (t3) ho phethoa.

t3 e behiloeng ho 0 e tla pheta potoloho ka ho sa feleng.

t4 e sebelisoa ho kenya mohato o sa sebetseng. t4 e behiloeng ho 0 e tla qobella potoloho ho fela ha t3 e fela.
# Mosebetsi Tshebetso
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (11)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “output”, wave: 'l.hlhlhlhlhlhlhl.'},

{},{},

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl…………' },

{lebitso: “output”, wave: 'l..hlhlhlhlhlhl..' }

]}
10 TLHOKOMELO/ TSAMAYA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, nako ea ho lieha (t1) e qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa. Ha trigger e tlosoa, tlhahiso e lula e le matla bakeng sa ho lieha ha nako (t2). Qetellong ea tieho ea nako (t2), tlhahiso e felloa ke matla, 'me nako ea ho lieha ha nako e se e loketse ho amohela sesosa se seng. Haeba trigger e tlosoa nakong ea ho lieha ha nako (t1), tlhahiso e tla lula e se na matla, 'me nako ea ho lieha (t1) e tla tsosolosa. Haeba trigger e ncha-

e sebelisoa nakong ea ho lieha ha nako (t2), tlhahiso e tla lula e le matla, 'me nako ea ho lieha (t2) e tla tsosolosa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (12)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH……l……. '},

{lebitso: “sephetho”, wave: 'l….h……..l… ' }

]}
11 TS'ELISITSOE TSIETSO Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso e ea matlafatsoa 'me e lula e le boemong boo ha feela ho ka sebelisoa trigger, kapa input vol.tage sala. Haeba trigger e tlosoa nakong ea ho lieha ha nako (t), tlhahiso e lula e se na matla, le nako ea ho lieha

(t) e setiloe bocha.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (13)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH……l…Hl. '},

{lebitso: “output”, wave: 'l….h…l……. '}

]}
12 TSIETSO TSIETSO Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa. Ha ho tlosoa mochine, nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso ke

de-nergized. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (14)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l…Hl.Hl.. ' },

{lebitso: “output”, wave: 'lh……lh… l.' }

]}
13 MOTS'OA MOTHO LE NAKO RESE Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me ho lieha ha nako (t) ho qala. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (15)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l.Hl.Hl… '},

{lebitso: “sephetho”, wave: 'lh…l..h……l..'}

]}
14 SINGLE-Thunya Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t) e qala. Nakong ea ho lieha ha nako (t), "trigger" e hlokomolohuoa. Qetellong ea tieho ea nako (t), tlhahiso e felloa ke matla, 'me tieho ea nako e loketse ho amohela sesosa se seng.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (16)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l.HlHl…. '},

{lebitso: “sephetho”, wave: 'lh…l..h…l…' }

]}
15 TS'ETSO TSIETSO

Single Cycle

 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa, nako ea ho lieha (t1) e qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t2). Qetellong ea tieho ea nako (t2), tlhahiso e felloa ke matla, 'me relay e se e loketse ho amohela mohloli o mong. Nakong ea ho lieha ha nako (t1) le ho lieha ha nako (t2), sesosa se hlokomolohuoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (17)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl..H……l..' },

{lebitso: “sephetho”, wave: 'l…h..l…h..l… ' }

]}
16 KHETHISO TS'ELISITSOE Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso e tlosoa matla. Tšebeliso ea "trigger" nakong ea tieho ea nako (t) e tla etsa hore tieho ea nako (t) e felloe ke nako 'me tlhahiso e felisoe matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (17)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl.H….l…. '},

{lebitso: “sephetho”, wave: 'lh.l..h…l…. '}

]}
17 KHETHISO E TRIGGER LAOLWA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso e tlosoa matla. Ho tlosoa ha "trigger" nakong ea ho lieha ha nako (t) ho tla etsa hore nako e liehang (t) e felle ke nako 'me tlhahiso e fokotsehe.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (18)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH.lH…..l… ' },

{lebitso: “sephetho”, wave: 'lh.lh….l…. '}

]}
18 MAHALA FOOMO NAKO

(Ho fihla ho lintlha tse 48 tsa tlhophiso)

 Ha ho sebelisoa voltage, ho lieha ha nako ho qala, 'me mokhoa oa mahala oa foromo o hlophisitsoeng ke mosebelisi oa etsoa. Ha mohlala o phethiloe o ka khutlisoa hape.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (19)
19 MAHALA PHETA

(Ho fihla ho lintlha tse 48 tsa tlhophiso)

 Ha ho sebelisoa voltage, ho lieha ha nako ho qala, 'me potoloho ea mahala e hlophisitsoeng ke mosebelisi e etsoa. Hang ha e qala potoloho e tla phetoa khafetsa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (20)
20 HLAKELITSOE KHABANE Holim'a kopo ea ho kenya voltage, tlhahiso e matlafatsoa, ​​​​'me nako e lieha

(t) qala. Qetellong ea tieho ea nako (t), tlhahiso e tlosoa matla. Haeba trigger e sebelisoa nakong ea tieho ea nako (t) tlhahiso e tlosoa matla 'me tieho e hlakotsoe. Kenyelletso voltage tlameha ho tlosoa ho tsosolosa nako ea ho lieha ha nako.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (21)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……lh…… l' },

{lebitso: “trigger”, wave: 'l…………Hl… '},

{lebitso: “sephetho”, wave: 'lh…..lh…l… ' }

]}
21 SINGLE Shot NAKO RESET TŠOARA ON TRIGGER Holim'a kopo ea ho kenya voltage, sebali se se se loketse ho amohela leqhubu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me ho lieha ha nako (t) ho qala. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla. Haeba trigger e ntse e sebelisoa ka mor'a tieho (t) tlhahiso e lula e le matla ho fihlela trigger e tlosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (22)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl..HlHl..H.. l.' },

{lebitso: "sephetho", wave: 'lh.lh….lh.. l.' }

]}
22 LATELA Holim'a kopo ea ho kenya voltage, relay e tloaelehileng e se e loketse ho amohela leqhubu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa. Sehlahisoa se tsoela pele ho matlafatsoa ho fihlela trigger e tlosoa, ka nako eo sehlahisoa se felloa ke matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (23)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl..HlHl..H.. l.' },

{lebitso: “output”, wave: 'l.hl..hlhl..h… l.' }

]}
23 TEBELLO NTJANA 1 Ha ho kenya voltage e sebelisoa, tlhahiso ea nako ea nako e ea matlafatsoa, ​​​​'me relay e lokisoa ho amohela lets'oao la trigger. Haeba trigger e kentsoe ka nako leha e le efe nakong ea ho lieha ha nako ea pele (t1), ketso ena e tla tsosolosa nako bakeng sa t1, 'me tlhahiso e tsoela pele ho lula e le matla. Hang ha nako ea ho lieha ha nako t1 e fela ntle le lintho tse ling tse susumetsang, tlhahiso e tlosoa matla bakeng sa nako ea bobeli ea ho lieha ho lieha (t2) ebe potoloho e pheta.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (24)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.HlHl.. HlHlHlHl.' },

{lebitso: “output”, wave: 'lh……lh…… l' }

]}
24 Mosebetsi 24 Ha ho kenya voltage kentsoe, sebala nako se se se loketse ho amohela ho kenya letsoho. Haeba nako e pakeng tsa lintho tse susumetsang e le ka tlase ho t1 'me sebali sa nako se baloa ke li-trigger tse latellanang, joale tlhahiso e latela sethatho ho fihlela nako e pakeng tsa lintho tse susumetsang e feta t1.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (25)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trg blue”, wave: 'l.HlHlHlHl..HlHlHl.' },

{lebitso: “trg green”, wave: 'l…….. HlHlHl.' },

{lebitso: “output”, wave: 'l…..hlhl……. '}

]}
# Mosebetsi Tshebetso
Tšebeliso e sebetsang. Ts'ebetso ena e ka sebelisoa e le alamo ea lets'oao le retelehang e lokiselitsoeng ho kengoa ka mor'a palo e behiloeng ea lipotoloho. Sehlahisoa sa nako se tla kengoa ts'ebetsong bakeng sa t2 kapa nako ea ho qala. Li-triggers tse putsoa le tse tala li hokahane ho fetola li-bulbs tsa mats'oao lehlakoreng ka leng. The trigger e lokiselitsoe ho mode 2 mme ts'ebetso ea trigger e behiloe ho XOR. Ts'ebetso ea XOR e tla lumella "trigger" e putsoa kapa e tala ho kenya alamo, empa ts'ebetso ea nako e le 'ngoe nakong ea ts'ebetso ea kotsi e ka hlakola sesosa.
25 SEHLOOHO PHETOHO TRIGGER Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela ho kenya letsoho. Ha trigger e sebelisoa tlhahiso e matlafatsoa bakeng sa ho lieha ha nako (t1). Ho lokolloa ha trigger ho boetse ho matlafatsa tlhahiso ea nako (t2)
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (26)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH…l..H…..l.. ' },

{lebitso: “sephetho”, wave: 'l.hl..h.lhl.. hl' }

]}
26 KONYANE SEBAKA LE KHEFUTSO Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela ho kenya letsoho. Ka ts'ebeliso e khuts'oane ea (<t2) ea trigger tlhahiso e matlafatsoa bakeng sa tieho ea nako (t1). Tšebeliso ea bobeli ea trigger e tla fokotsa matla a

tlhahiso. Ka ts'ebeliso ea nako e telele (> t2) ea trigger, tlhahiso e matlafatsoa 'me e ts'oaroa e matlafalitsoe ho fihlela trigger e tlosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (27)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lHlHl… Hl.Hl.' },

{lebitso: “output”, wave: 'lhlh….lh.l..' }

]}
28 Mosebetsi 28 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela ho kenya letsoho. Ka ts'ebeliso e khuts'oane ea (<t2) ea trigger tlhahiso e matlafatsoa bakeng sa tieho ea nako (t1). Tšebeliso ea bobeli ea "trigger" e tla tsosolosa tieho (t1). Ka ts'ebeliso ea nako e telele (> t2) ea trigger, tlhahiso e matlafatsoa 'me e ts'oaroa e matlafalitsoe ho fihlela trigger e tlosoa. Ka ts'ebeliso e telele (> t2) ea trigger nakong ea

tlhahiso e sebetsang, nako ea ho qeta nako e hlakotsoe 'me tlhahiso e lula e le matla ho fihlela trigger e tlosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (28)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: "trigger", wave: 'lHlHlHl. HlH.l.' },

{lebitso: “output”, wave: 'lhlh….lhl' }

]}
29 KHABANE LE KHOTHATSO LEKHOTLA

Single Cycle

 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa tlhahiso e matlafatsoa 'me nako ea ho lieha (t1) e qala. Qetellong ea tieho ea nako (t1), tlhahiso e tlosoa matla 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t2). Nakong ea ho lieha ha nako (t1) le ho lieha ha nako (t2), sesosa se hlokomolohuoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (29)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl..H……l..' },

{lebitso: “output”, wave: 'lhl….hl….. ' }

]}
30 MATLA ITS'ELISITSOE NAKO Ts'ebetso ea nako e reretsoe ho ba nako ea ho bala. Nako ea ho bala e emisa ha motlakase o tlosoa empa e tsoela pele ha motlakase o sebelisoa hape. Ho tsamaisa sebali-nako mokhoeng ona, qala ka ho lokisa nako ea sebali-bala, tšebetso le sehlomathisi. E kenya tshebetsong trigger bakeng sa

> Metsotsoana e 5 e seta sebali bocha ebe countdown e qala. Ha kakaretso ea nako e le kholo ho feta nako e behiloeng esale pele tlhahiso e qala ho sebetsa. Ho kenya tshebetsong bakeng sa > metsotsoana e 5 ho seta palo-ho theoha.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (30)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh…lh…..lh… l' },

{lebitso: “sephetho”, wave: 'l…………..h..l' }

]}
31 PHETHA TS'OANELO TS'OANE Ts'ebetso e ts'oana le Mosebetsi #5 (Pheta potoloho). Nako ea karolo ea pele e sebetsang ea potoloho e baloa ka mokhoa o sa reroang ka mefuta e behiloeng pakeng tsa t1 le t2. Mokhahlelo oa ho etsa lintho o pakeng tsa t3 le t4.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (31)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lHl……………. '},

{lebitso: “sephetho”, wave: 'lh.lh.lh….l…' }, {}, {},

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “sephetho”, wave: 'lh.lh.lh….l.. ' }

]}
32 LATELA NTS'ELI TS'OANELO Holim'a kopo ea ho kenya voltage, tlhahiso e matlafatsoa, ​​​​'me nako e lieha

(t) qala. Qetellong ea tieho ea nako (t), tlhahiso e latela boemo ba trigger. Ha sesebelisoa se sebelisoa, tlhahiso e matlafatsoa 'me e tsoela pele ho matlafatsoa ho fihlela mokelikeli o tlosoa. Ha trigger e tlosoa tlhahiso e tlosoa matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (32)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l…..HlHl..H… l.' },

{lebitso: “sephetho”, wave: 'lh.l..hlhl..h… l.' }

]}
33 KHABANE Holim'a kopo ea ho kenya voltage, sebali se se se loketse ho amohela leqhubu. Hang ha "trigger" e lemohile "preset number of cycles" (n) sephetho se kengoa ts'ebetsong bakeng sa nako eo (t1). The trigger e hlokomolohuoa nakong ea tlhahiso e sebetsang. Qetellong ea tieho ea nako (t1), sebali sa nako se se se loketse ho amohela sesosa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (33)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lP……………. ke},

{lebitso: “output”, wave: 'l…hl.hl.hl.' }

]}
34 TSIETSO KA NAKO Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, nako ea ho lieha (t1) e qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa. Sehlahisoa se lula se matlafalitsoe ka nako ea t2 ntle le haeba moferefere o tlosoa. Haeba trigger e tlosoa, sephetho se tla fokotsoa 'me potoloho ea fella.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (34)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l..H…. l.' },

{lebitso: “sephetho”, wave: 'l…h..l….h…l..' }

]}
35 TIMA HO TSAMAYA LE INITIALIZATI ON Holim'a kopo ea ho kenya voltage, tlhahiso e matlafalitsoe bakeng sa t2. Sehlahisoa sa nako se se se loketse ho amohela senotlolo. Ha trigger e sebelisoa, tlhahiso e matlafatsoa. Ha ho tlosoa mochine, nako ea ho lieha (t) e qala. Qetellong ea tieho ea nako (t), tlhahiso e tlosoa matla. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (35)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l….Hl…HlHl… ' },

{lebitso: “sephetho”, wave: 'lh.lh.lh….l.. ' }

]}
36 LATELA LE KHOTHATSO LEKHOTLA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha sesebelisoa se sebelisoa, tlhahiso e matlafatsoa 'me e tsoela pele ho matlafatsoa ho fihlela mokelikeli o tlosoa. Ha trigger e tlosoa, tlhahiso e tlosoa matla 'me nako ea t1 e qala. Nakong ea nako ea t1 sebali sa nako se ke ke sa arabela mothating.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (36)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.HlHl.H…l… ' },

{lebitso: “output”, wave: 'l.hl…hl..h..l… ' }

]}
37 PHAPHISA TS'OANE Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Hang ha "trigger" e se e fumanoe, palo ea li-cycle (n) e setiloe esale pele.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (37)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lP……………. ke},

{lebitso: "output", wave: 'lhlhlhlhlhlhlhlhl' }

]}
38 LATELA LE LOCKOUT 2 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha sesebelisoa se sebelisoa, tlhahiso e matlafatsoa 'me e tsoela pele ho matlafatsoa ho fihlela mokelikeli o tlosoa. Ha trigger e tlosoa, tlhahiso e tlosoa matla 'me nako ea t1 e qala. Nakong ea t1 sebali sa nako se ke ke sa arabela sethatho mme nako ea ho notlela t1 e tla qala bocha.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (38)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl.Hl..Hl..Hl.' },

{lebitso: “output”, wave: 'l.hl……..hl..hl.' }

]}
39 MOTS'OA MOTHO LIEKETSENG MABELI Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t1) e qala. Nakong ea ho lieha ha nako (t1), sesosa se hlokomolohuoa. Qetellong ea tieho ea nako (t1), tlhahiso e felloa ke matla, 'me nako ea ho lieha e se e loketse ho amohela sesosa se seng. Hoa tšoana le ho trigger 2 (Green)
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (39)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l.HlHl…. '},

{lebitso: “trigger”, wave: 'l………….Hl.. ' },

{lebitso: “sephetho”, wave: 'lh…l..h…lh.l..' }

]}
40 MOTS'OA MOTHO KA LITLHAKISO TSE PELI 2 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t1) e qala. Nakong ea ho lieha ha nako (t1), sesosa se hlokomolohuoa. Qetellong ea tieho ea nako (t1), tlhahiso e felloa ke matla, 'me nako ea ho lieha e se e loketse ho amohela sesosa se seng. Tšebeliso ea "trigger 2" e ne e tla tsosolosa tieho ea nako ho t2.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (40)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH….l.Hl…… ' },

{lebitso: “trigger”, wave: 'l………..Hl… '},

{lebitso: “sephetho”, wave: 'lh…l..h……l..'}

]}
41 KOPELELE OR Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me ho lieha ha nako (t) ho qala. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla. Kopo e 'ngoe le e' ngoe e latellanang ea trigger e eketsa tieho ea nako (t1).
# Mosebetsi Tshebetso
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (41)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.HlHl.HlHlHl..' },

{lebitso: “output”, wave: 'lhlH…lH…..l..' }

]}
42 NTS'OE THUTO HLAKOLA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, tlhahiso e matlafatsoa, ​​​​'me ho lieha ha nako (t) ho qala. Tšebeliso leha e le efe ea "trigger" nakong ea tieho e tla tsosolosa tieho ea nako (t) 'me tlhahiso e lula e le matla. Kopo e 'ngoe le e 'ngoe e latellanang e beha tieho ea nako e tlang ho fihlela e fihla ho tieho ea nako (t4). Sesebelisoa se latelang sa trigger se tla hlakola tlhahiso. Tlhahiso e boetse e hlakotsoe haeba ho lieha ha nako ho behiloe ho 0.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (42)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.HlHl.. Hl.Hl.' },

{lebitso: “output”, wave: 'lhlh….l..hl. '}

]}
43 TEBELLO NTJANA 2 Ha ho kenya voltage e sebelisoa, tlhahiso ea nako ea nako e ea matlafatsoa, ​​​​'me relay e lokisoa ho amohela lets'oao la trigger. Haeba trigger e kentsoe tšebetsong ka nako efe kapa efe nakong ea ho lieha ha nako ea pele (t1) nako ea ho lieha ha nako (t1) e tla beoa bocha, 'me e lula e setiloe bocha ha trigger e ntse e sebetsa. Sephetho se lula se le matla. Ha trigger e sa sebetse nako ea ho lieha (t1) e qala. Hang ha nako ea ho lieha ha nako t1 e fela ntle le lintho tse ling tse susumetsang, tlhahiso e tlosoa matla bakeng sa nako ea ho lieha ha nako ea bobeli (t2). Sesebelisoa sa Trigger se hlokomolohuoa nakong ea ho lieha (t2). Ha ho qeta nako ea ho lieha (t2) tlhahiso e matlafatsoa, ​​​​'me nako ea ho lieha (t1) e tsosolosoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (43)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.HlHl.Hl.HlHlHlHl.' },

{lebitso: “sephetho”, wave: 'lh….l..h…… l' }

]}
44 TS'ETSO TSIETSO

Multiple Cycles

 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa, nako ea ho lieha (t1) e qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t2). Qetellong ea tieho ea nako (t2), tlhahiso e felloa ke matla, 'me relay e se e loketse ho amohela mohloli o mong. Ka bobeli ba nako ea ho lieha (t1) le nako

tieho (t2), mohlodi o hlokomolohuoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (44)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl..H……l..' },

{lebitso: “sephetho”, wave: 'l…h..l…h..l… ' }

]}
# Mosebetsi Tshebetso
45 KHABANE LE KHOTHATSO LEKHOTLA

Multiple Cycles

 Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela sesosa. Ha trigger e sebelisoa tlhahiso e matlafatsoa 'me nako ea ho lieha (t1) e qala. Qetellong ea tieho ea nako (t1), tlhahiso e tlosoa matla 'me e lula e le boemong boo bakeng sa ho lieha ha nako (t2). Ka nako eo ka bobeli e liehang (t1)

le tieho ea nako (t2), sesosa se hlokomolohuoa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (45)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.Hl.Hl..H……l..' },

{lebitso: “output”, wave: 'lhl….hl.hl.' }

]}
46 BONAHALA/TSHA TIISETSO HLAKOLA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha trigger e sebelisoa, nako ea ho lieha (t1) e qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e matlafatsoa. Sephetho se lula se le matla bakeng sa ho lieha ha nako (t3). Haeba trigger e sebelisoa ha tlhahiso e ntse e sebetsa, ho lieha ha nako (t2) ho qala. Qetellong ea tieho ea nako (t2), tlhahiso e felloa ke matla. Ka mor'a hore tlhahiso e fokotsehe, nako ea ho lieha (t4) e qala nakong eo ts'ebeliso ea trigger e leng teng

hlokomolohile.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (46)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lH…l…H…l…' },

{lebitso: “output”, wave: 'l….h…….l… ' }

]}
47 BONAHALA/TSHA TIISETSA KA HO HLAKOLA LE HO LATELA Holim'a kopo ea ho kenya voltage, relay ea nako e se e loketse ho amohela seqhutsu. Ha "trigger" e sebelisoa, tlhahiso e ea sebetsa 'me ho lieha ha nako (t1) ho qala. Qetellong ea nako ea ho lieha (t1), tlhahiso e ntse e tsoela pele ho matlafatsoa le haeba trigger e tlosoa. Sephetho se lula se le matla bakeng sa ho lieha ha nako (t3). Haeba trigger e sebelisoa ha tlhahiso e ntse e sebetsa, ho lieha ha nako (t2) ho qala. Qetellong ea tieho ea nako (t2), tlhahiso e felloa ke matla. Ka mor'a hore tlhahiso e fokotsehe-

matlafatsoa nako ea ho lieha (t4) e qala nakong eo ts'ebeliso ea trigger e hlokomolohuoang.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (47)
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'l.HlH.l…H…lHl..' },

{lebitso: “output”, wave: 'l.hlh……..l.hl..' }

]}
48 KHABANE THIBELO NAKO Holim'a kopo ea ho kenya voltage, sebali se se se loketse ho amohela leqhubu. Hang ha "trigger" e lemohuoa palo e seng e setiloe ea li-cycle (n) e sebelisitsoeng nakong e khuts'oane ho feta t1 tlhahiso e kengoa ts'ebetsong bakeng sa nako eo (t2). The trigger e hlokomolohuoa nakong ea tlhahiso e sebetsang. Qetellong ea tieho ea nako (21), sebali sa nako se se se loketse ho amohela sesosa.
timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (48)
# Mosebetsi Tshebetso
Hlahisa setšoantšo inthaneteng: https://wavedrom.com/editor.html

{letšoao: [

{lebitso: “matla”, wave: 'lh……………. ke},

{lebitso: “trigger”, wave: 'lpppl..pplpl.pppl..' },

{lebitso: “output”, wave: 'l..hl……. hl'}

]}

Sehlahisoa sa nako

Joalokaha ho hlalositsoe ka holimo timer e qalisoa kapa e hlahisoa ke e 'ngoe ea mekhoa e' meli:

  • Tšebeliso ea matla voltage
  • Lets'oao le phahameng kapa le tlase la ho qala

Letšoao la trigger e ka ba e 'ngoe ea tse latelang:\

  • Sesebelisoa sa taolo (mabitso a omileng): switch switch, push-button, kapa switch ea float
  • Moqtage (motlakase oa matla): tlhahiso ea lets'oao ho tsoa sesebelisoa se seng, lets'oao la matla

Ts'ebetso ea ho qala nako ka lichate.

Setšoantšo sa 3.

Sehlahisoa se phahameng Ka mor'a ts'ebeliso ea matla, nako ea ho lieha ho tsamaisa nako e se e loketse ho amohela "trigger".

Phetoho ea voltage ka terata ea trigger ho tloha tlaase * ho ea holimo ** e tla etsa hore ho qale ho lieha ha nako (t).

 timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (49)
Sehlaseli se tlase Ka mor'a ts'ebeliso ea matla, nako ea ho lieha ho tsamaisa nako e se e loketse ho amohela "trigger".

Phetoho ea voltage ka terata ea trigger ho tloha holimo ** ho ea tlaase * e tla etsa hore ho qale ho lieha ha nako (t).

 timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (50)

*Motlakase o tlase oa molumotage e nkoa e le ka tlase ho <0.5v mme e lokela ho ba haufi le 0v kamoo ho ka khonehang. **Motlakase o phahameng oa molumotage e kholo ho feta >0.8v mme e ka ba hodimo ho lekana le bophahamo ba modumotage.

Ho sebelisa "trigger input" e nang le sehokelo se omileng (joalo ka switch kapa konopo), mohala oa "trigger" o tla hloka ho 'huleloa' ho ea ho High kapa Low.tage. Tlhophiso ea nako e lumella hore terata ea trigger e hlophisoe hore e ka huleloa Holimo, moo motlakase o monyane o kengoang ho boloka terata e le ho High vol.tage kapa e thehiloeng ho boloka terata ea trigger e le Low voltage. Tafole e latelang e bonts'a nako ea ho lokisa terata ea trigger ho ea Holimo kapa ho ea Tlase.

Example ea trigger setup.

Setšoantšo sa 4.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (51) timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (52)

Tafole ea litlhophiso tsa sebali sa nako.
(Hlokomela hore nomoro ea ts'ebetso ea nako ea # e tla sebelisoa nakong ea tlhophiso ea nako.)

Setšoantšo sa 5.

Qetella tlhophiso Hlahisa Hula Hlahisa e sebetsang Tlhaloso
* ** *** Sheba lintlha tse ka tlase
1 Trigger ha e sebetse
2 6 10 14 Tlase Phahameng Bakeng sa likhokahano tse omeletseng lipakeng tsa mohala oa trigger le positive.
3 7 11 15 Tlase Tlase Bakeng sa nyeoe moo voltage e sebelisoa ho leqhutsu.
4 8 12 16 Phahameng Tlase Bakeng sa likhokahano tse omeletseng lipakeng tsa terata ea trigger le fatše.
5 9 13 17 Phahameng Phahameng Bakeng sa nyeoe moo mobu o sebelisoang ho qala.
* Ts'ebetso ea ts'ebetso e netefatsa phetoho ea "trigger" ho tloha ho e sa sebetseng ho ea ho qala boemo ha e qala. E sebetsa ho mesebetsi: kaofela
** Trigger e sebetsa joalo ka sesebelisoa sa ho bulela / tima. E sebetsa mosebetsing: 5, 6, 8, 9, 18, 19, 31
***Qala o sebelisa ts'ebetso ea flip-flop. E sebetsa ho mesebetsi: kaofela

Example ea Litlhophiso tsa Trigger ho 2, 10, le 14 ho sebelisa Mosebetsi oa 5. Ha Trigger e behiloe ho 2, e qala potoloho. Ho beha Trigger ho 10 ho fetola ts'ebetso le ho e tima. Ho e beha ho 14 e sebetsa joalo ka flip-flop trigger, e bulelang ts'ebetso ka mochini oa pele le ho tima ka ea bobeli. Mokhoa ona oa flip-flop o sebetsa mesebetsing eohle. timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (53)

Ts'ebetso ea li-trigger tse ngata.
Potoloho e na le lintho tse peli tse kenyang letsoho: Blue le Green. Ho sebelisa li-triggers ka bobeli ka nako e le 'ngoe beha li-trigger ho litlhophiso tse nepahetseng ebe u khetha ts'ebetso ea trigger ho e' ngoe ea tse latelang:

Boputsoa feela Boputsoa bo sebetsa joalo ka sesosa sa ts'ebetso. Green e lumelletsoe ho etsa mesebetsi e 'meli e qalang joalo ka Function 38.
Botala feela Botala bo sebetsa joalo ka ts'ebetso ea ts'ebetso, Boputsoa bo hlokomolohuoa
LE E utloahalang LE ts'ebetso. E le hore sebapa-nako se ka qala, lithahasetsi ka bobeli li tlameha ho sebetsa.
OR E utloahalang KAPA ts'ebetso. E le hore sebali sa nako se ka qala, ke sesupa-tsela se le seng feela se lokelang ho sebetsa.
XOR Ts'ebetso e utloahalang ea XOR. Hore sebali sa nako se ka qala e le 'ngoe feela ea

li-triggers li tlameha ho ba ho Active, eseng ka bobeli.
Ntho e ka sehloohong e putsoa / Tala e hlakola Botala bo sebetsa joalo ka sesosa sa ts'ebetso, Green e hlakola ts'ebetso ea ts'ebetso ka ho seta sebali bocha.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (54)

Setšoantšo se latelang se bonts'a motsoako oa ho qetela oa motsoako o hlahisoang bakeng sa ts'ebetso e 'ngoe le e' ngoe e khethiloeng. Sebala nako se kopanya boleng bona ba ho qala ka ho kopanya lintho tse susumetsang tse Botala le Botala, ebe se sebelisa boleng bona bo baliloeng tšebetsong e fapaneng.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (55)

Ts'ebetso ea "Blue Main/Green Cancel" trigger e sebetsa ka mokhoa o ikhethileng. Ho etsa mohlala, nahana ka Mosebetsi #01 joalo ka moemeli example. Ho kenya "blue trigger" ho qala ts'ebetso ea ts'ebetso, ha ho kenya "trigger" e tala ho thusa ho tsosolosa mosebetsi o tsoelang pele.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (56)

Hlahisa moeli
Moeko o lekanya nako eo seqhutsu se tlamehang ho lula se sebetsa kapa se sa sebetse pele sebali se lumela.

Sehlahisoa sa pele se hlokomolohuoe
Nako e tlang hang ka mor'a matla a ho qala nakong eo sebali se lulang se sa arabele lets'oao la ho qala.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (57)

Nako ea Output mode
Mokhoa oa tlhahiso ea nako o lumella mosebelisi ho beha tlhahiso ea hang-hang, moo tlhahiso e tlang ebe e tima hang-hang, kapa ho eketseha butle / ho fokotseha, moo tlhahiso e laoloang ke PWM (Pulse Width Modulation) le r.amps ho fihlela ho 100% mosebetsi ka metsotsoana e 4. Phallo ea butle-butle e ntle bakeng sa tsamaiso ea mabone ho eketsa butle-butle le ho fokotsa mabone. timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (58)

Mofuta oa tlhahiso ea nako
Maemong a mang, ho hlokahala ho fana ka tlhahiso e tsosolositsoeng ho mojaro, kahoo ho e-na le ho fana ka matla ho mojaro nakong ea ho lieha ha nako (t), tlhahiso e tlosoa matla.
Setšoantšo se latelang se bontša e leample ts'ebetso ea nako e nang le tlhahiso e tloaelehileng le e khutliselitsoeng morao.

timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (59)

Sebali sa nako se lokiselitsoe esale pele ka tlhahiso e tloaelehileng.

Lenaneo la nako

Potoloho ea "programmer" ea hlokahala ho fetola litlhophiso tsa nako.

Lenaneo le sebelisetsoa:

  • Tokiso ea nako ea ho bala.
  • Ho fetola sebali sa nako.
  • E kenya tšebetso e khethiloeng mohopolong oa sebali.
  • Ho laola tlhahiso ea nako.
  • Ho bala mela ea ho qala nako.

Lenaneo la nako le ka etsoa ka ho hokahanya sebali sa nako ka kotloloho ho moetsi oa lenaneo Setšoantšo sa 2.3 kapa ho hokahanya sebali sa nako bakeng sa lenaneo la in-circuit Setšoantšo sa 2.4.

Lenaneo la nako le kenyelletsa ho khetha li-parameter tse nepahetseng tsa ts'ebetso, trigger le nako. Latela mehato e ka tlase ho kenya ts'ebetso ea 12 (nako ea ho lieha), qala 2 (trigger on rising voltage) le ho lieha ha metsotsoana e 10:

  • Hokela sebali sa nako ho sebali sa lenaneo.
  • Matlafatsa sebapali ka ho hokela komporong kapa bankeng ea matla ea USB.
  • Tsamaisa switch ea sebatli ho ea ho ON ho fana ka matla ho sebali sa nako. Haeba switch e ne e le maemong a ON ha programmer e ne e buletsoe, bulela switch hore e be OFF, ema metsotsoana e seng mekae ebe u e bulela hape.
  • Kamora metsotsoana e seng mekae, "programmer blue LED" e ne e tla khantša ho netefatsa hore moetsi oa lenaneo o buisana le sebali sa nako.
  • Batla timers.shop marang-rang a Wi-Fi ho laptop kapa fonong ebe o hokela ho eona.
  • Bula sebatli fonong/ komporong 'me u kenye aterese 192.168.4.1 ka har'a bar ea aterese ea sebatli.
  • Eya ho "Timer's Config" menu 'me u etse liphetoho tse hlokahalang.

Ho batle phoso

Matšoao Mehato ea qeto
Sebali sa nako ha se hokahane le sebatli, 'me LED e putsoa ea programmer ha e ON.
  • Netefatsa hore lithapo tse tharo (tse Ntšo, Bokhubelu, le Bosoeu) li hokahane hantle lipakeng tsa sebali sa nako, 'me ha lia khutsufatsoa. Shorting White le Red e ka etsa hore sebatli se se ke sa sebetsa.
  • Fetolela sesebelisoa sa motlakase ho ea ho OFF.
  • Tobetsa likonopo tse peli tsa moetsi oa lenaneo tse haufi le sokete ea USB. Likonopo li ne li ka sututsoa ka tatellano efe kapa efe. Sena se tla qala sebatli bocha.
  • Fana ka matla ho sebali sa nako ka ho tsamaisa switch ho ea sebakeng sa ON. Ho ka nka metsotsoana e 'maloa hore moetsi oa lenaneo a buisane le sebali sa nako.
  • Ikopanye le ts'ehetso haeba u ntse u e-na le mathata ka khokahano ea moetsi oa lenaneo.
Menu ya Kgetha Mosebetsi ha e bontshe ditshebetso tse teng mme tshebetso ya menu ya Tlhophiso ya Dinako le di-setting tsa nako ha di na letho. Tokiso e bonahala e hlakotsoe sebaling sa nako.   Sebapali ha sea hokeloa ka katleho ho sebali sa nako 'me ha se khone ho hula lintlha tse teng tsa nako hore li bontšoe. E le hore sebatli se bonts'e mesebetsi le litlhophiso tse fumanehang, sebali sa nako se hloka ho buisana ka katleho le moqapi, LED e putsoa e lokela ho ON.
·

Ho khutsufatsa lithapo tsa RED le WHITE tsa moetsi ho ka senya mohala oa data oa moetsi. Ho leka mohala oa data oa moetsi, ikopanye le WI-FI ea moetsi, bula aterese e latelang ho sebatli: http://192.168.4.1/testdataline, 'me u latele litaelo. timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (60)

Fumana tšehetso ho http://timers.shop

Mokhoa o tlase oa Matla
Nako e ka hlophisoa ka mokhoa oa Low Power o theolang tšebeliso ea hona joale e sa sebetseng ho boleng bo tlase haholo. Mokhoa ona o etsa hore sebali sa nako se tšoanelehe bakeng sa ts'ebetso ea betri. Bakeng sa mohlalaampLe, haeba re nka betri ea 9V e nang le matla a 500mah re ka lekanya nako eo sebali se ka sebetsang ka eona ka mokhoa o sa sebetseng.

500mah/0.020ma = lihora tse 25000. Mokhoa oa Motlakase o Monyenyane oa sebapi nako o lumelloa ka mokhoa oa kamehla. Empa maemo a 'maloa a tlameha ho finyelloa ho ba le matla a tlase ka ho fetisisa:

  1. The trigger e lokela ho hlophisoa ho #2 (haeba e sebelisoa), ntle le Pull up. Moqapi oa voltage lokela ho ba ho 0v bakeng sa tšebeliso e tlase ea matla.
  2. Sephetho se ho 0V.
  3. Mesebetsi e latelang e lumelletsoe mokhoa oa Motlakase o Tlaase: 2, 10, 12 – 17, 20 – 29.

Hlokomela: Ka lebaka la polokelo ea matla e ka hare, sebali-nako se ke ke sa seta bocha ka ho khaoha ho se hokae.tage lokela ho ba ho feta 3sec.

Lisebelisoa

Potoloho ea lenaneo la nako (e rekisoa ka thoko) timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (61)

Lifitio tsa YouTube

https://timers.shop/Timer-V8-Videos_ep_57-1.html timersshop-V8-0-Multi-Functional-Timer-Relay-setšoantšo (62)

Lihokelo tse sebetsang
Lintlafatso tsa morao-rao tsa firmware le ts'ebetso: https://timers.shop/Universal-Programmer-firmware_ep_61-1.html

Lipotso tse atisang ho botsoa (FAQ)

Litokomane / Lisebelisoa

timersshop V8.0 Multi Functional Timer Relay [pdf] Buka ea Mong'a
V8.0, V9.0, V8.0 Multi Functional Timer Relay, V8.0, Multi Functional Timer Relay, Functional Timer Relay, Timer Relay, Relay

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *