SDC-logo

SDC ED4200 Corbin Russwin Electric Latch Retraction Kit

SDC-ED4200-Corbin-Russwin-Electric-Latch-Retraction-Kit-product

tlhomamiso

Retrofit Installation Note: 42″ or 48″ exit devices that have been modified to fit a 36″ or smaller opening, may not have the required space to fit the standard E. L. R. assembly. Always verify the distance from the end of the touchpad to the end rail, and if necessary, consult with the factory for appropriate selection.
Remove the End Cap, Mounting Plate, Cover, Cover Plug, Rail Housing and Dogging.

SDC-ED4200-Corbin-Russwin-Electric-Latch-Retraction-Kit-fig-1

Replace Housing Cover, Cover with Plug, End Cap and the End Cap Cover.

SDC-ED4200-Corbin-Russwin-Electric-Latch-Retraction-Kit-fig-2

Ha u khutlisetsa lisebelisoa ho lisebelisoa tse teng tse otlolohileng, ho lokisoa ha melamu hoa hlokahala bakeng sa ts'ebetso e nepahetseng ea Motlakase oa Latch Retractor. Hang ha yuniti e kentsoe hantle, e fe matla e le hore latch e theohe fatše, ebe u kopanya lithupa tse emeng ho sesebelisoa ebe u etsa liphetoho tse nepahetseng.

SDC-ED4200-Corbin-Russwin-Electric-Latch-Retraction-Kit-fig-3

Litokomane / Lisebelisoa

SDC ED4200 Corbin Russwin Electric Latch Retraction Kit [pdf] Buka ea litaelo
ED4200, Corbin Russwin Electric Latch Retraction Kit, ED4200 Corbin Russwin Electric Latch Retraction Kit, Russwin Electric Latch Retraction Kit, Electric Latch Retraction Kit, Latch Retraction Kit, Retraction Kit, Kit

References

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa. masimo hlokahala di tšoauoa *