QUASAR SCIENCE R2 LED Linear Light
Se ka Lebokoseng
R2 Ho fetaview
R2 Sebopeho sa Interface
Ho kenya R2
- Mount Dual Screw Baby Pin ka kotloloho khanyeng e sebelisa 3/16 Hex wrench.
- Mount Dual Screw Baby Pin to Ossium Rail Slider e sebelisa 3/16 Hex wrench bakeng sa boiketlo bo eketsehileng le ho feto-fetoha ha maemo.
- Mount Rotator* e sebelisa 5/32 hex wrench ka ho toba khanyeng.
- Mount Rotator* e sebelisa 5/32 hex wrench ho Ossium Rail Slider bakeng sa boiketlo bo eketsehileng le ho feto-fetoha ha maemo.
Rea qala
- Ho seta Matla, Nako ea Mobala, +/- Botala, Saturation le Hue:
- Tobetsa kapa ho fihlela tshebetso eo o e batlang e bontshwa skrineng, ebe o tobetsa ho kgetha.
- Tlhokomelo ea khetho "> <" e tla tloha ho "> Mosebetsi <" ho ea ho "> Boleng <".
- Tobetsa kapa ho seta boleng. Tobetsa ho boloka.
- Tlhokomelo ea khetho "> <" e tla tloha ho "> Boleng <" ho khutlela ho "> Mosebetsi <".
Key Interface
- Konopo ea Matla: Leseli Le butse: Tobetsa 'me u tšoare motsotso o le mong. Leseli Le Koetsoe: Tobetsa 'me u tšoare metsotsoana e 1. Tlanya Habeli: Eya ho Status Screen.
- Konopo ea Output: Totobetsa konopo ho bulela/ho tima khanya bakeng sa ts'ebetso ea mokhoa oa matsoho. Fetola 'mala / matla ntle le phetoho e amang tikoloho.
- Konopo ea Khokahanyo: Ho CRMX: Bakeng sa RX, tobetsa o hatelle ho tlosa leseli. Bakeng sa TX, Tlanya e le 'ngoe ho romella lets'oao la ho para.
- Tlanya Habeli ho hlahisa Wireless Menu (Leq 13.)
- Left / Minus Konopo: Fokotsa boleng kapa u tsamaise ka ho le letšehali.
- Konopo ea Right / Plus: Eketsa boleng kapa u tsamaise ka ho le letona.
- Kenya / Boloka Konopo: Kenya khetho, Boloka Boleng.
- Ntlafatsa Boema-kepe: Boema-kepe ba USB-C bakeng sa ho etsa liapdeite tsa software ka USB-C Thumb Drive
Mabone a Boemo
The Data le Wireless Status Lights e ka ba mebala e fapaneng ho latela mofuta oa khokahano le boemo. Lekola hore lebone le mekhoeng e nepahetseng ea mehala le ea waelese le hore mabone a Status a butsoitse ho tlhophiso. Sheba Leqephe la 8 bakeng sa motsoako oa mebala.
Main menu - Mokhoa oa matsoho
- > Matla a 0 ho isa ho 100% ka 1%
- > Color Temp 1,750K to 10,000K by 1 Phapang e Lemohang Feela
- > +/- Botala -G 100 ho ya ho G 0 ho ya ho +100 G - Ex. +G 25 = 1/4 +Tala, -G 50 = 1/2 -Tala (Magenta),
- > Saturation 0 ho 100% ka 1%
- > Hue 0 ° ho 360 °
- > CT Preset 3,200K – 4,300K – 5,600K – 6,500K(D65) – 7,500K(D75) – 10,000K – 2,000K – 2,500K – 3,000K
- > Mmala o Seteng Bofubedu – Orange – Bosehla – Botala – Cyan – Boputswa – Violet – Magenta
- > Liphello Mookoli – Potoloho e Khutšoane – Paparazzi – Strobe – Mollo – Mabone a Tšohanyetso – Demo* (Sheba Leqephe la 17-18)
- > Hlophisa Litlhophiso tsa Leseli (Sheba Leqephe 11)
Config Menu
- > Channel ea DMX Beha mocha oa DMX
- > Palo ea Pixels Beha palo ea lihlopha tsa pixel leseling ho laola ka lihlopha. (Sheba leqephe la 12)
- > Profile Beha DMX profile bakeng sa lesedi. (Sheba leqephe la 18-23)
- > Di-setting tsa Wired Kgetha dikgetho tsa data tse Wired ho laola lebone. (DMX, Art-Net, sACN) (Sheba Leqephe la 13)
- > Di-setting tse se nang Waele Kgetha dikgetho tsa data tse se nang waelese. (CRMX, Bluetooth, WiFi) (Sheba Leqephe la 14)
- > Keta pele / Latela Seta Moetapele / Latela mokhoa oa leseli. (Sheba leqephe la 15)
- > Output Mode Seta lebone ho Sephetho se Tlwaelehileng, Sehlahiswa se Phahameng, kapa Mokgwa wa Mokgwa o Tlase. (Sheba leqephe la 16)
- > Matla a ho Matla ka Konopo, e bulela ka Konopo ya Matla. Ka Input, e bulela ha motlakase o hoketsoe. (Sheba leqephe la 16)
- > Mabone a Boemo E bulela/ tima mabone a boemo hore a sebedise khamera.
- > Lipuo Senyesemane (Sheba le websaete ea lipuo tse ling.)
- > Lamp Lihora E bonts'a kakaretso ea lihora tseo lebone le khantšitsoeng ka tsona. Tobetsa Enter ho bona Lihora tsa LED.
- > Apdeita Firmware Beha lebone mokgweng wa ho Apdeita.
- > Firmware E bontsha mofuta wa firmware leboneng.
- > Seta botjha ho ya ho ya kamehla E seta lebone ho kgutlela ho boleng ba lona ba kamehla.
Khetho ea Pixel & Moralo
- Ha u khetha DMX profiles, Sehlopha se seng le se seng sa Parameter Channel se phetoa ka pixel.
- Ha Q100R2 e setetsoe ho 1 Pixel bakeng sa example, e tla laola khanya eohle e le 1 pixel mme e hloka sete e le 'ngoe ea DMX Data ho e laola.
- Ha Q100R2 e behiloe ho 48 Pixels bakeng sa example, e tla laola leseli e le lipikselse tse 48 mme e hloka lihlopha tse 48 tsa DMX Data ho e laola.
- Sebopeho sa lipikselse se qala ho tloha "Gaffer's Left" ha u sheba leseli le lebisitsoeng ho Gaffer, ka li-control tse ka lehlakoreng le letona.
Wired Control Menu
- > Wired Mode Khetha DMX512 kapa Ethernet Mode ho Laola lebone.
- > DMX Laola lebone ka DMX512.
- > Ethernet Laola lebone ka sACN kapa Art-Net.
- > Di-setting tsa DMX
- > DMX Channel Beha DMX Channel 001 ho 512.
- > Emisa Tlosa Letshwao la DMX ha o le moleng.
- > Di-setting tsa Ethernet
- > View Aterese ea IP Bontša aterese ea IP e amohetsoeng ka bo eona ka DHCP kapa sete ea Static IP address.
- > Mokhoa oa Aterese ea IP Beha Mokhoa oa Aterese ea IP.
- > DHCP (Auto) Lumella lebone ho fumana aterese ea IP ho tsoa ho router ka bo eona.
- > Static Dumella lebone ho seta aterese ya IP ka bowena.
- > Boloka DHCP joalo ka Static Boloka lintlha tse amohetsoeng ho tsoa ho Router ea DHCP 'me u li boloke e le IP e tsitsitseng, u fetola Boemo ho ea ho Static.
- > IP Address, Subnet Mask, Gateway Kenya aterese ea IP, Subnet mask, le Gateway.
- > Bokahohle Beha Bokahohle bakeng sa leseli.
- > DMX Channel Beha DMX Channel 001 ho 512.
- > Ethernet Mode Khetha Ethernet protocol: sACN/Art-Net, sACN Feela, Art-Net Feela.
- > Mokhoa o se nang mohala
- > DMX Lumen Radio CRMX e se nang mohala ea DMX. Tobetsa o hatelle ho Hlakola. Tlanya transmitter ho para.
- > Bluetooth Dumella lebone ho hokela ka Bluetooth.
- > WiFi Dumella lebone ho hokela marangrang a waelese ho amohela Art-Net ka WiFi.
- > E tima E tima ditshebetso tsohle tsa Wireless.
- > Litlhophiso tsa Wireless DMX* E Bontša Hardware le Firmware ea CRMX TimoTwo.
- > Litlhophiso tsa WiFi* Hokela ho Netweke e se nang Waele ho amohela Art-Net ka WiFi. Fetolela lebone sebakeng sa phihlello sa waelese ho lumella sesebelisoa sa mohala ho theha litlhophiso tsa waelese.
- > Status Lights On/Timme E tima mabone a boemo hore a sebelisoe ha khanya e bonoa khamera.
- > Seta li-setting tsa Wireless ho ea ka ho sa Feleng Khutlisa Li-setting Tsohle tse se nang Waele ho feme ea kamehla.
Keta / Latela Mokhoa
- Mokhoa oa ho etella pele / Latela o lumella leseli le le leng ho laola mabone a mangata ka nako e le 'ngoe. The lead e fetisetsa lintlha tsa mebala le matla, ka mehala kapa ntle le waelese, ho
- E latela. Ha Moetapele o fetola maemo, Latelang le eona e tla fetoha. Sena se sebetsa le ho FX ka sekepeng.
- Ho sebelisa Mode oa Lead/Latela, ea ho Config -> Lead/Latela. Beha moetapele ho etella pele 'me u behe balateli bohle hore ba Latele 1 ho bapisa moetapele.
- Latela 2-8 li sebelisoa ka litlamorao ho etsa phello e ts'oanang ka linako tse fapaneng. Sena se tla tsamaisa litlamorao tse tšoanang, matla le maemo empa eseng ka sync.
Mokhoa oa Phello
Ho na le Mekhoa e 3 e fapaneng ea Output, e sebelisetsoang ho eketsa tlhahiso ea leseli kapa tharollo libakeng tse fapaneng tsa sebaka sa ho fifala.
- Sephetho se Tloaelehileng: Mocheso o tloaelehileng oa ho sebetsa, tlhahiso e tloaelehileng ea khanya.
- Sephetho se Phahameng: Mocheso o phahameng oa ts'ebetso, khanya e phahameng ea khanya.
- Low Output: E fana ka qeto e phahameng haholo karolong e fifalang e tlase ea lebone. Matla a phahameng ke hoo e ka bang 25% ea Sephetho se Phahameng
Matla On Mode
Mokhoa oa Power On o sebelisoa ho hlalosa mokhoa oa ho khantša lebone.
Liphello Bukana
Main menu
| Phello | Sephetho |
| Mookoli | Tsamaisa ka har'a 'mala ho tloha ho 0° ka botlalo |
| Potoloho e Khutšoane | Leseli le khantšitsoe ka ho tima ka tšohanyetso |
| Paparazzi | Leseli le tingoe ka ho khantša ho sa reroang |
| Strobe | Ho benya ho rhythmic |
| Mollo | Sephetho sa mollo o panyang |
| Mabone a Tšohanyetso | Mabone a phatsimang a mebala e fapaneng |
| Mohlala | E tsamaellana le Hue Wheel le Liphello tsohle |
Liphello Parameters
| Ntho | Sephetho |
| Phello | Khetha phello |
| Matla | Seta Matla a phello |
| Mmala | Beha mocheso oa 'mala oa motheo |
| Temp | Beha +/- botala ba mocheso oa 'mala |
| +/- Botala | Khotsofatsa phello |
| Phatlalatso | Beha 'mala |
| Hue
Sekhahla |
0-200% bakeng sa lebelo la
phello |
| 100% ke lebelo le tloaelehileng |
Litaolo tsa Sephetho (Ka letsoho)
Mollo
| Boima ba 'mele | Sephetho |
| Sekhahla | 0-200% bakeng sa lebelo la phello
100% ke lebelo le tloaelehileng |
| Boholo | Boemo bo phahameng ka ho fetisisa ba phello |
| Bonyane | Boemo bo tlase haholo ba phello |
| Boima ba 'mele | Tlase, E bohareng, E phahame |
| Seta pele | +/-400K Mmala ho 2400K, 3200K, 4000K, 5600K |
Lenane le lenyenyane la Leseli la Tšohanyetso
| Ntho | Sephetho |
| Mohlala | E le 'ngoe, Habeli, Triple, Quad |
| Litlhophiso tsa Mebala | R&B, B&B, R&32, R&56, B&32, B&56
R&B&32, R&B&56 |
| Mmala 1 & 2 | Khubelu, Orange, Yellow, Green, Blue, Magenta, |
| 2000K, 3200K, 4000K, 5600K, 6000K |
DMX Profiles & Pixel Patching
DMX Profiles bakeng sa mabone a tla ka mefuta e 2. Motheo oa DMX Profiletse kenyeletsang mekhoa ea HSIC, RGB, CCT le FX Profiles tse nang le likanale tse ling ho qala tse hahiloeng ho FX.
DMX Profiles (Motheo)
Ha u hlophisa lipikselse tse khanyang, Pixel e 'ngoe le e' ngoe e sebetsa e le "light" ea eona e le 'ngoe, ke hore, Parameter Channel Group (PCG). PCG ka 'ngoe e na le sete ea likanale tsa DMX tse hlalosoang ke DMX Pro e khethiloengfile, ho laola pixel e fanoeng.
DMX Profiles (FX)
FX Profiles li hahiloe holim'a pro e tšoanangfiles joalo ka Basic Profiles. Bakeng sa mohlalaample. Profile 9 ke Profile 1 + FX Channels. Ha o sebelisa DMX profiles e hahiloeng ho FX, Sehlopha sa FX Channel (FCG) se eketsoa qetellong ea patch. Liphetoho ho FCG li sebetsa ho leseli lohle
DMX Pixel Patching Examples
Haeba Palo ea Pixels = 1, sebopeho sohle se sebetsa e le sehlopha se le seng se laoloang ke DMX Pro e behiloeng hajoale.file. F kapa DMX Profile = "1: HSIC Mode - 8 Bit - 5 Channels", sehlopha seo se na le likanale tsa taolo tsa DMX tsa 5: 1. Matla (%) 2. Color Temp (K) 3. +/- Green (-G 100 ho + G 100) 4. Hue (deg) 5. Saturation (%)
ExampLe 1:
ExampLe 2:
DMX Profiles (Motheo)
| # | Lebitso | Botebo bo Botle | # ea Likanale ka Pixel | Tlhaloso ea setsi |
| 1 | HSIC | 8 Bit | 5 | 1: Matla a 2: Moetso oa Mobala oa 3: +/- Taolo e Tala 4: Hue 5: Saturation |
| 2 | HSIC-16 | 16 Bit | 8 | 1+2: Matla a 3: Mocheso oa Mobala 4: +/- Taolo e Tala 5+6: Hue 7+8: Saturation |
| 3 | Hsi | 8 Bit | 3 | 1: Matla 2: Hue 3: Phallo |
| 4 | XFade ka +/-G | 8 Bit | 3 | 1: Matla a 2: Mobala Temp 3: +/- Taolo ea Tala |
| 5 | XFade | 8 Bit | 2 | 1: Matla a 2: Mocheso oa Mobala |
| 6 | CCT & RGB | 8 Bit | 7 | 1: Matla a 2: Moetso oa Mobala 3: +/- Taolo e Tala 4: Crossfade 5: E khubelu
6: Botala 7: Boputsoa |
| 7 | CCT & RGB-16 | 16 Bit | 9 | 1+2: Matla a 3: Moetso oa Mobala 4: +/- Taolo e Tala 5+6: Crossfade
7: Khubelu 8: Botala 9: Boputsoa |
| 8 | RGB | 8 Bit | 3 | 1: Khubelu 2: Botala 3: Boputsoa |
| 13 | RGBTD | 8 Bit | 5 | 1: Khubelu 2: Botala 3: Boputsoa 4:2000K 5: 6000K |
| 14 | RGBTD | 16 Bit | 10 | 1+2: Khubedu 3+4: Botala 5+6: Botala 7+8:2000K 9+10: 6000K |
DMX Profiles (Basic) Parameters
| Paramethara | DMX Boleng | Boleng |
| Matla | 0-255 | 0 - 100% |
| Mobala Temp | 0-255 | 1,750K-10,000K |
| +/- Botala | Sheba Chate ka ho le letona | |
| Hue | 0-255 | 0° – 360° |
| Phatlalatso | 0-255 | 0 - 100% |
| Crossfade | 0-255 | 0 - 100% |
| Khubedu | 0-255 | 0 - 100% |
| Botala | 0-255 | 0 - 100% |
| Boputsoa | 0-255 | 0 - 100% |
| DMX Boleng | % | Phello |
| 0-10 | 0-4 | Ha ho Phello |
| 11-20 | 5-8 | E Felletseng Minus Green |
| 21-119 | 8-46 | -99% ho isa ho -1% |
| 120-145 | 47-57 | E sa nke lehlakore |
| 146-244 | 57-96 | 1% ho isa ho 99% |
| 245-255 | 96-100 | Botala bo Feletseng Botala |
DMX Profiles (FX)
| # | Lebitso | Botebo bo Botle | # ea Ch Per Pixel | # ea FX Ch | Parameter Channel Group (E phetoa ka Pixel) | Sehlopha sa FX Channel (Sehlopha se le seng ka Leseli) |
| 9 | HSIC-FX | 8 Bit | 5 | 3 | 1: Matla 2: Mobala Temp 3: +/- Botala
4: Hue 5: Phatlalatso |
x+1: FX x+2: FX sekhahla x+3: FX boholo
x = Kakaretso ea Likanale ho Lihlopha tsa Channel tsa Parameter |
| 10 | HSIC-FX-16 | 16 Bit | 8 | 3 | 1+2: Matla 3: Mobala Temp 4: +/- Botala
5+6: Hue 7+8: Phatlalatso |
|
| 11 | CCT & RGB-FX | 8 Bit | 7 | 3 | 1: Matla 2: Mobala Temp 3: +/- Botala
4: Crossfade 5:Khubedu 6: Botala 7: Boputsoa |
|
| 12 | CCT & RGB-FX
–16 |
16 Bit | 9 | 3 | 1+2: Matla 3: Mobala Temp 4: +/- Botala
5+6: Crossfade 7: Khubedu 8: Botala 9: Boputsoa |
DMX Profiles (FX) Parameters
| Phello | DMX Boleng | % |
| TLOA | 0-26 | 0-10 |
| Mookoli | 27-38 | 11-15 |
| Potoloho e Khutšoane | 39-51 | 16-20 |
| Paparazzi | 52-64 | 21-25 |
| Strobe | 65-77 | 26-30 |
| Mollo | 78-90 | 31-35 |
| Mabone a Tšohanyetso | 91-102 | 36-40 |
| Tšebeliso ea ka moso | 103-255 | 41-100 |
| Ntho | Sephetho |
| Phello | Khetha phello |
| Matla | Beha matla a phello |
| Mobala Temp | Beha mocheso oa 'mala oa motheo |
| +/- Botala | Beha +/- botala ba mocheso oa 'mala |
| Phatlalatso | Khotsofatsa phello |
| Hue | Beha 'mala |
| Sekhahla | 0-200% - Lebelo la phello 100% - Lebelo le tloaelehileng |
| Boholo | Phello ea Mollo: Beha +/- ea Extensity Ex: Int 50%, FX Size 10 = 50-10, le
50+10. Sephetho = 40-60 Fire Emerg Light: Beha Paterone ea Blink |
Lintlha tsa Motheo
| Mohlala | Q25R2 | Q50R2 | Q100R2 |
| Wattage | Boholo ba li-watts tse 25 | Boholo ba li-watts tse 50 | Boholo ba li-watts tse 100 |
| Boima ba 'mele | 1.76 lbs (0.8 lik'hilograma) | 3.3 lbs (1.5 lik'hilograma) | 5.84 lbs (2.64 lik'hilograma) |
| Litekanyo | 23x1.75 ho
(584.2 x 44.5 mm) |
46.9 x 1.75 ho (1161.7 x 44.5 mm) | 90.86 x 1.75 ho (2307.8 x 44.5 mm) |
| Tšebeliso ea Matla | 120v = 0.25 amp 240v = 0.13 amp | 120v = 0.45 amp 240v = 0.25 amp | 120v = 0.90 amp 240v = 0.50 amp |
| 12v = 2.50 amp 24v = 1.30 amp | 12v = 4.50 amp 24v = 2.30 amp | 24v = 4.80 amp |
Tiisetso
Tiisetso ea lilemo tse 3 ho tloha ka letsatsi la theko.Moreki o tlameha ho fana ka bopaki ba ho reka.Tiisetso ena e ka fetisetsoa ke Quasar Science kapa Setsi sa Tšebeletso sa Mahlale sa Quasar se Authorized*Quasar Science e ke ke ea lefella: Tšenyo e bakoang ke kotsi, tšebeliso e mpe kapa tlhekefetso. Liketso tsa Molimo. Ho hloleha hofe kapa hofe ho etsahalang ka lebaka leha e le lefe ho feta thepa le mosebetsi oa matsoho. Litšenyehelo life kapa life tsa ho tsamaisa thepa kapa tsa ho tsamaisa thepa.Boitatolo ba litiisetso/mefokolo ea liphekolo: Litiisetso tse boletsoeng, ho kenyeletsoa le tekanyo e sebetsang ea litiisetso tsa thekiso kapa ho sebetsa molemong oa morero o itseng ha li kenyelelitsoe ho isa moo ho lumelletsoeng ke molao. ho isa ho lilemo tse 3 kapa nako e khuts'oane e lumelletsoeng ke molao. Linaha tse ling, liprofinse kapa linaha ha li lumelle lithibelo kapa likhaello mabapi le hore na tiisetso e boletsoeng ea thekiso kapa boikoetliso e nka nako e kae, mefokolo kapa mekhelo e ka holimo e kanna ea se sebetse ho uena. e lokisoe kapa e nkeloe sebaka ho ea ka lipehelo tsa waranti ena e lekantsoengQuasar Science, LLC ha e nke boikarabello bakeng sa litšenyehelo tsa tšohanyetso kapa tse ling. Tiisetso ena e u fa litokelo tse khethehileng tsa molao 'me u kanna ua ba le litokelo tse ling tse fapaneng ho ea ka naha, profinse ho ea ho profinse kapa naha ho ea ka linaha.
Litokomane / Lisebelisoa
 |
QUASAR SCIENCE R2 LED Linear Light [pdf] Bukana ea Mosebelisi R2 LED Linear Light, R2, LED Linear Light |
