User Manual Q&AAnswers
Oct 13, 2025 - 09:51 AM
To set up the Turbo and Macro buttons on your SURGE Wireless Pro Controller, follow these steps as outlined in the user manual:
1. **Turbo (Auto-Fire) Button Setup:**
- To activate Turbo mode, press and hold the TURBO button.
- While holding the TURBO button, press any face button (A/B/X/Y) or trigger button (L1/L2/R1/R2) that you want to apply the Turbo function to.
- Repeat the same process to cancel the Turbo function.
2. **Macro Button Setup:**
- To set a Macro button, press and hold the TURBO button for 5 seconds (LED indicators will flash for 1 second).
- While still holding the TURBO button, press one of the MACRO buttons (Example: M1).
- Press the desired button combination in sequential order (Example: UP + DOWN + A + B).
- Press the TURBO button to complete the MACRO button setup (LED indicators will flash for 1 second).
- Now, when you press the MACRO button (M1), the controller will execute the desired button combination in sequential order (UP + DOWN + A + B).
3. **Macro Button Reset:**
- To reset a Macro button, follow a similar process to the Macro Button Setup but press the Macro button you want to reset (Example: M1).
- Press the TURBO button to complete the Macro button reset.
- After this, pressing the Macro button (M1) will not trigger any actions.
By following these steps, you can customize the Turbo and Macro buttons on your SURGE Wireless Pro Controller for a personalized gaming experience on your Nintendo Switch console.
Add New Comment