PYLE PLRVSD300 Digital Mobile Receiver System Tataiso ea Mosebelisi
PYLE PLRVSD300 Digital Mobile Receiver System

tlhomamiso

Notes:
Khetha sebaka se hloahloa moo sesebelisoa se ke keng sa kena-kenana le ts'ebetso e tloaelehileng ea ho khanna.

  • Pele o kenya yuniti, hokela wiring ka nakoana 'me u netefatse hore e hokahane hantle' me sesebelisoa le sistimi li sebetsa hantle.
  • Use only the parts included with the unit to ensure proper installation.
    The use of unauthorized parts can cause malfunctions.
  • Buisana le morekisi ea haufi le uena haeba ho kenya koloi ho hloka ho cheka masoba kapa liphetoho tse ling tsa koloi.
  • Kenya yuniti moo e sa keneng tseleng ea mokhanni 'me e ke ke ea ntša mopalami kotsi haeba ho e-na le setopo sa tšohanyetso.
  • Haeba lengeloi la ho kenya le feta 30 ° ho tloha holimo, yuniti e kanna ea se fane ka ts'ebetso ea eona e nepahetseng.
    Lenaneo la ho kenya
  • Qoba ho kenya yuniti moo e tla ba tlas'a mocheso o phahameng, joalo ka ho tloha letsatsing le tobileng, kapa moeeng o chesang, ho tsoa ho futhumatsang, kapa moo ho ka bang lerōle, litšila kapa ho sisinyeha ho feteletseng.

Din Front/Rear-Mount
This unit can be properly installed either from“Front”(conventional DIN Front-mount) or“Rear”(DIN Rear-mount installation, utilizing threaded screw holes at the sides ofthe unit chassis).
For details, refer to the following illustrated installation methods.

Ho qala ho kenya
Setsi sena se ka kenngoa ho dashboard efe kapa efe e nang le monyako joalo ka ha ho bonts'itsoe ka tlase:

INSTALLATION ATTENTIONS
  1. Sebapali sena se lokela ho kengoa ke setsebi sa litsebi.
  2. Read the instruction and operation of equipment carefully before installing.
  3. Etsa bonnete ba hore o hokela mehala e meng pele o hokela motlakase.
  4. Ho qoba potoloho e khuts'oane. Ka kopo etsa bonnete ba hore terata eohle e pepesitsoeng e ts'ireletsehile.
  5. Ka kopo, lokisa lithapo tsohle ka mor'a ho kenya.
  6. Please make connection to the player accordingly to this instruction manual.
    Wrong connection may cause damage.
  7. Sebapali sena se lekana feela sesebelisoa sa 12V DC ka kopo etsa bonnete ba hore koloi ea hau ke ea mofuta ona oa sistimi ea motlakase ea cathode.
  8. Correctly connect the wires. Wrong connection will cause malfunction or damage the electrical system.

KHOPELA

Letšoao la tlhokomeliso Tlhokomeliso: Do not install radio without rear cover installed. No user serviceable parts inside.
Rear cover provides protection against potential fire hazard.
Ntseng bo eketseha taeo
Ntseng bo eketseha taeo

KOANETSO KERETSO

ISO KHOPO

Khokahano ea Wiring

Wire Insertion View
PIN NO RETS'ELISITSOE MOHAPI TLHALOSO
  NAMUNU C RIGHT SPEAKER (+)
2 LETSOA / MOTSOA C RIGHT SPEAKER (-)
3

/

/

4 /

/

5 Blue MATLA ANTENNA
6 /

/

7 GRAY/ BLACK A RIGHT SPEAKER (-)
8 GRAY A RIGHT SPEAKER (+)
  PURULE / MOTSOA B RIGHT SPEAKER (-)
10 pherese B RIGHT SPEAKER (+)
11 BROWN C LEFT SPEAKER (+)
12 BROWN / BLACK C LEFT SPEAKER (-)
13 /

/

14

/

/

15 RED B+
16 PELE KHOTSO
17 MOTSOEU / MOTSOE A LEFT SPEAKER (-)
18 MOSEBETSI A LEFT SPEAKER (+)
19 THOLA / NTSHO B LEFT SPEAKER (-)
20 GREEN B LEFT SPEAKER (+)

tshebetsong

Location of key

Location of key

  1. VOL/PWR/SEL
  2. LCD
  3. DISC SLOT
  4. SLEEP
  5. TLHOKOMELO
  6. DIM (Dimmer)
  7. SPEAKER A/B/C
  8. 1 PAU
  9. 2 INT
  10. 3 PRT
  11. 4 RDM
  12. 5 DIR13.
  13. 6 DIR
  14. 4. SEBOPHELO
  15. MODE
  16. POWER/MUTE
  17. DISP / MORAOANA
  18. Konopo Mosebetsi
  19. Konopo Mosebetsi
  20. Konopo Mosebetsi (Eject)
  21. EAR PHONE OUTPUT
  22. AUX E Jack
  23. USB INTERFACE (charging)
  24. Khutlisa konopo
  25. USB INTERFACE (music)

TŠEBELETSO

Turn ON/OFF the unit and mute function
Press Konopo Mosebetsi /MUTE button to turn ON the unit. When the unit is on, shortly press this button for mute on/off.
Press and hold this button to turn off the unit.

Audio & Setting Tokiso
Shortly press SEL button and rotate VOL knob to show below:
ZONE A->ZONE B->ZONE C.

To select one of them and press SEL to enter below items:
BAS (-7 +7)->TRE (-7-+7)->BAL (R7 L7)->EQ (POP-ROCK-CLASS-JAZZ-OFF) ->LOUD (off/on)->P-VOL(00-40)

Press and hold SEL button into the SETTING menu as below:
BEEP (off/on)->CLOCK (12/24)->CT (indep/sync)->AREA (USA/EUR)->DX (LOC)->STEREO (MONO)
In each item, rotating the VOL knob to set them.
When shows menu, press the DISP/BACK button to exit the menu.

Tlhophiso ea P_VOL
Ho beha matla ho bophahamo ba modumo. Haeba molumo oa ho koala o le nyane ho feta P-VOL. Nakong e tlang ha o bulela yuniti, molumo o tla bolokoa o le ho koala ha molumo. Haeba molumo oa ho koala o moholo ho feta P-VOL. Nakong e tlang, bulela yuniti molumo o tla khutlisetsoa boleng ba P-VOL.

CT (INDEP/SYNC)
CT INDEP: Oache e sebetsa e ikemetse. Ha e hokahantsoe le nako ea seteishene sa RDS.
CT SYNC: Oache e tla amahanngoa le nako ea seteishene se amoheloang sa RDS.
Hlokomela: When the time was set by manual. The CT will back to INDEP mode automatically.

HLOKO 24/12: Ho beha nako ho sebopeho sa 24H kapa 12H.
BEEP (HO THOMA/TSHA): Turn ON/OFF the beep sound.
SEBAKA (USA/EUR): To choose USA or EUROPE frequency

DX/LOC (Distance/Local)
LOC: Fumana seteishene se matla sa mats'oao feela sebakeng sa ho batla.
DX: Fumana seteishene sa mats'oao se matla le se fokolang ha u batla seteishene.

STEREO / MONO
STEREO: Fumana lets'oao la stereo la FM.
MONO: Fetola stereo ea FM hore e be monochrome. E ka fokotsa lerata ha lets'oao le fokola.

Mosebetsi oa Dimmer
Press DIM button to set the brightness to high/mid/low.

Polelo ea FCC

Sesebelisoa sena se latela karolo ea 15 ea Melao ea FCC. Ts'ebetso e latela maemo a mabeli a latelang:

  1. Sesebediswa sena se ke ke sa baka tshitiso e kotsi, mme
  2. Sesebediswa sena se lokela ho amohela tshitiso efe kapa efe e amohetsweng, ho kenyeletswa le tshitiso e ka bakang tshebetso e sa rateheng.

Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka ts'ireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo. Sesebelisoa sena se hlahisa, se sebelisa ebile se ka hlahisa matla a maqhubu a seea-le-moea, 'me haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi likhokahanong tsa seea-le-moea.

Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi kamohelong ea seea-le-moea kapa thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

  • Khutlisa kapa u fallise lenakana le amohelang.
  • Eketsa karohano lipakeng tsa lisebelisoa le seamohedi.
  • Kopanya lisebelisoa ka sehokelo sa potoloho e fapaneng le eo seamoheli se hokahantsoeng le eona.
  • Ikopanye le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea / TV bakeng sa thuso.

Temoso: Liphetoho leha e le life kapa liphetoho tse sa lumelloang ka ho hlaka ke mokha ea ikarabellang bakeng sa ho latela li ka hlokisa matla a mosebelisi ts'ebeliso ea lisebelisoa.

Sesebelisoa sena se latela meeli ea ho pepeseha ha radiation ea FCC e behetsoeng tikoloho e sa laoleheng. Mochini ona ha oa lokela ho ba teng kapa o sebetse ka kopanelo le lenakana kapa sesebelisoa se seng.

 

Litokomane / Lisebelisoa

PYLE PLRVSD300 Digital Mobile Receiver System [pdf] Buka ea Mosebelisi
PLRVSD300, 2A5X5-PLRVSD300, 2A5X5PLRVSD300, Digital Mobile Receiver System, PLRVSD300 Digital Mobile Receiver System

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa.