ProCon TB800 Series Low Range Turbidity Sensor
TS'ELISO TS'OANE
Sensor ea turbidity e ipapisitse le thekenoloji ea leseli le hasaneng la infrared. Leseli la infrared le hlahisoang ke mohloli oa leseli le tla hasana ha le feta ho sample tlas'a teko nakong ea phetiso. Matla a leseli le hasaneng a lekana ka kotloloho le moferefere. Sensor ea turbidity e na le mochine o amohelang leseli o hasaneng ka lehlakoreng la 90 °. Boleng ba turbidity bo fumanoa ka ho hlahloba matla a khanya e hasaneng. E ka sebelisoa haholo bakeng sa ho lekola moferefere litsing tsa likhoerekhoere, limela tsa metsi, liteishene tsa metsi le metsi a holim'a metsi hammoho le lits'ebetso tse ling tsa indasteri.
Ho kenya
Beha sensor sebakeng se loketseng ho netefatsa litekanyo tse nepahetseng. Khetha sebaka se fumanehang habonolo bakeng sa ho hloekisa le ho se hlokomela habonolo. Kenya sensor haufi le sebaka se fanang ka ts'episo e tšepahalang le e emelang sample.
- Peipi e kenang, phaephe e ntšang metsi le phaephe ea litšila li tlameha ho fanoa ke mosebelisi. Liphaephe tsena e lokela ho ba lipeipi tsa PE.
- Sephutheloana se kenyelletsa liphaephe tse tharo tsa 10 cm PE (3/8 ″) tse ka hokelang ka kotloloho ho bayonet e potlakileng e loketseng hose ea silicone ea 8 × 12 mm.
- Ho khothalletsoa ho kenya valve e fokotsang khatello le valve e tloaelehileng karolong e ka pele ea phaephe e kenang ho laola khatello ea metsi le ho phalla, ho thibela ho phalla.
Tatelano ya Tshebetso
Metsi a phalla ho tloha ka sekoting ho ea seleng ea phallo. Ha boemo ba metsi ka seleng ea phallo bo fihla bophahamong ba phallo ea phallo ea phallo (bohareng ba sekoti), metsi a tla ntšoa ka mokhoa o ikhethileng ka har'a tube e tšoeu ho ea sebakeng sa metsi. Metsi a mang a tla phalla ka har'a mojule oa ho lekanya turbidity ka tube e bonaletsang, ebe a feta ka har'a sensor ea turbidity, ebe a bokana moo metsi a tsoang teng. Mokelikeli oa metsi a litšila / o lekantsoeng ke sehokelo sa drainage; ha valve ea motlakase e sebetsa, e tla tšolla metsi ohle ka har'a mojule oa ho lekanya turbidity.
Litlhaloso tsa Tekheniki
| Mohlala No. | TB800 |
| Range | 0-20NTU |
| Sekhahla sa Phallo | 300ml/min ~ 500ml/min | 4.75 GPH ~ 7.92 GPH |
| Phepelo ea motlakase | 9-36VDC |
| Ho nepahala | ±2% |
| Khatello Range | ≤43.5psi |
| Mocheso oa ho sebetsa | 32 - 113oF | 0 - 45oC |
| Sephetho | MODBUS RS485 |
| Qeto | 0.001 NTU | 0.01 NTU | 0.1 NTU | 1 NTU ; E Thehiloe ho Measured Range |
| Sehlopha sa Tšireletso | IP65 |
| Tubing | 3/8 ″ PE tubing |
| Litekanyo | 400 x 300 x 170 limilimithara |
Litekanyo
Wiring
| Mmala | Tlhaloso |
| Khubedu | + 9-36 VDC |
| Ntsho | - VDC |
| Botala | RS485A |
| Bosoeu | RS485B |
| Boputsoa | Relay |
| Bosehla | Relay |
| Mmala | Tlhaloso |
| Khubedu | + 9-36 VDC |
| Ntsho | - VDC |
| Botala | RS485A |
| Bosoeu | RS485B |
| Boputsoa | Relay |
| Bosehla | Relay |
Puisano Protocol
Sensor e na le ts'ebetso ea puisano ea MODBUS RS485
| Sensor Bala Aterese Khoutu ea tšebetso 04 | Tlhophiso ea Khokahano: 9600 N 8 1 | |||||
| Eketsa | Lintho | Boleng | Bolaoli | Mofuta oa data | Tlhaloso |
| 0 | Reserved | ||||
| 2 | Mocheso | Bala Feela | Phapamiso e le 'Ngoe | ||
| 4 | Seretse | Bala Feela | Phapamiso e le 'Ngoe | ||
| 6 | Moqtage ea Mocheso | Bala Feela | Phapamiso e le 'Ngoe | ||
| 8 | Moqtage ea Turbidity | Bala Feela | Phapamiso e le 'Ngoe | ||
| Aterese ea Sensor Calibration | Khoutu ea tšebetso 03 | |||||
| Eketsa | Lintho | Boleng | Bolaoli | Mofuta oa data | Tlhaloso |
| 0 | Aterese | 1 | Bala-Ngola | Palo kaofela | 1 |
| 1 | Kereiti ea Buffer Coefficient | 2 | Bala-Ngola | Palo kaofela | 0-4 |
| Aterese ea Sensor Calibration | Khoutu ea Mosebetsi 0x03 Bala | Bala Khoutu ea tšebetso 0x10 Lokisa | |||||
| Eketsa | Lintho | Range | Bolaoli | Mofuta oa data | Tlhaloso |
| 100 | Ntlha ea Pele ea Calibration |
Ho latela Range | Bala-Ngola | Phapamiso e le 'Ngoe | |
| 102 | Ntlha ea Bohlano ea Calibration | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 104 | Ntlha ea Borobeli ea Tekanyo | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 106 | Ntlha ea Leshome ea Tekanyo | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 108 | Moqtage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 110 | Bohlano Moqtage A | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 112 | Bohlano Moqtagle B | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 114 | Borobeli Moqtage A | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 116 | Borobeli Moqtagle B | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 118 | Moqtage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 120 | Khalemelo e Matla | 0.000 | Bala-Ngola | Phapamiso e le 'Ngoe | |
| 122 | Matšeliso a Linear | 1.000 | Bala-Ngola | Phapamiso e le 'Ngoe | |
| 124 | Khalemelo ea Mocheso | 0.000 | Bala-Ngola | Phapamiso e le 'Ngoe | |
| 126 | Tlhophiso ea Mocheso | 25.0 | Bala-Ngola | Phapamiso e le 'Ngoe | |
| 128 | Ntlha ea Bobeli ea Calibration | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 130 | Ntlha ea Boraro ea Tekanyo | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 132 | Ntlha ea Bone ea Calibration | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 134 | Ntlha ea Botšelela ea Calibration | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 136 | Ntlha ea bosupa ea Calibration | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 138 | Ntlha ea Borobong ea Tekanyo | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 140 | Moq. oa Bobelitage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 142 | Moq. oa Borarotage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 144 | Moq. oa Bonetage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 146 | Moq. oa Botšelelatage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 148 | Moqtage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 150 | Borobong Moqtage | Bala-Ngola | Phapamiso e le 'Ngoe | ||
| 200 | Fektheri Calibration | 60 | Ngola Feela | Palo kaofela | Ke Maemo a Calibration feela a Tsosolositsoeng |
Tlhaloso ea Sensor
Sensor Bala
Hokela sensor ea digital turbidity komporong ka MODBUS RS485, 'me u bule MODBUS debugging software: mbpoll.exe, Beha aterese 1,9600, N, 8,1, ebe u khetha "Float" ho "Display", joalo ka ha ho bonts'itsoe ho setšoantšo (a); moo 00002 e bonts'ang boleng ba mocheso, ke hore, mocheso o teng oa sensor ea turbidity ke 14.5oC, 00004 e bonts'a boleng ba turbidity, moo tharollo ea metsi e nang le turbidity sensor e teng 20.7 NTU.
Tlhaloso ea Sensor
- Hokela sensor ea turbidity khomphuteng. Khetha "Setup- -Poll Definition", ebe u khetha khoutu ea ts'ebetso ea 03, Aterese: 100, Length: 60. Lokisetsa motsoako o tsejoang oa tharollo e tloaelehileng, hlohlelletsa hantle.
- Tšela tharollo ka seleng ea phallo 'me u tobetse habeli aterese ea sebaka sa calibration khomphuteng ho view lebokose la puisano. Kenya boleng bo tloaelehileng ba mokelikeli.
- Kamora ho netefatsa hore sensor e tla qala ho itlhophisa ka bo eona, sephetho sa calibration ke vol e lumellanangtage aterese bit data. Calibration e phethehile ka mor'a 10s voltage botsitso.
- Example : Ho lekanya sensor ea turbidity ea mefuta e fapaneng ea 0-400 NTU, tharollo ea calibration e lokiselitsoeng ke 250 NTU. Khetha khoutu ea ts'ebetso ea 06, Kenyelletso ea Aterese ke 00138, ke hore, sebaka sa 9th calibration, ebe u kenya 250 ho Boleng.
- Kamora voltagE boleng ba 00150 bo tsitsitse, tekanyo e phethiloe.
Bala Tataiso ea ho Hlalosa
- Protocol ea puisano e sebelisa protocol ea MODBUS (RTU). Litaba tsa puisano le aterese li ka fetoloa ho latela litlhoko tsa moreki.
- Sebopeho sa kamehla ke aterese ea marang-rang 01, sekhahla sa baud 9600, ha ho na parity, e le 'ngoe ea ho emisa. Basebelisi ba ka seta liphetoho.
Khoutu ya tshebetso 04 taelo bakeng sa mohlalaampLe:
- Boleng ba mocheso =14.8ºC, Turbidity value=17.0NTU;
- Moamoheli o rometsoe: FF 04 00 00 00 08 XX XX
- Karabo ea makhoba: FF 04 10 00 00 00 00 3E 8A 41 6D F9 6B 41 87 9C 00 44 5E XX XX Tlhaloso:
- [FF] E emela aterese ea sensor
- [04] E emela khoutu ea ts'ebetso 04
- [10] Baemeli ba na le li-byte tse 16 tsa data
- [3E 8A 41 6D] =14.8; | Temp. boleng; tatellano ea ho arola: 41 6D 3E 8A
- [09 18 41 88]=17.0; | Turbidity boleng; taelo ea ho arola: 41 88 09 18
- [XX XX] E emela khoutu ea cheke ea CRC 16.
Khutlisa Tekanyo ea Fektheri (Ho hlokahala feela haeba ho hlokahala hore ho behoe teka-tekano)
Haeba digital turbidity sensor calibration e fosahetse nakong ea ts'ebetso ea calibration, khetha "06" khoutu ea ts'ebetso, kenya "200" ho "Aterese", "60" ho "Value", tobetsa "Send". Ho hlaha ponts'o ea pop-up "Response OK".
Mokhoa oa ho itokisa (Turbidity Standard Liquid 200mL 4000NTU) :
| Lethathamo la No. | Lintho tse bonahalang | Ammonium Chloride |
| A | Hydrazine Sulfate, N2H6SO4 (GR) | 5.00g |
| B | Hexamethylenetetramine, C6H12N4 (AR) | 50.00g |
- Ela ka nepo 5.000g ya Hydrazine Sulfate (GR) mme o e qhale ka hara metsi a nang le lefela. Tharollo e ntan'o fetisetsoa ho 500ml volumetric flask, e hlapollotsoeng ho ea ho sekala, e sisinyeha le e tlhotliloeng (e tlhotliloeng ka 0.2μm aperture, e tšoanang ka tlase).
- Ka nepo, bekha 50.000g ea Hexamethylenetetramine (AR), e qhibilihe ka har'a metsi a se nang metsi 'me u e fetisetse ka har'a 500ml volumetric flask, hlapolla ho sekaleng, sisinya hantle.
- Tokisetso ea 4000NTU Formazine Standard Solution: Fetisetsa 100ml ea e 'ngoe le e 'ngoe ea litharollo tse peli tse ka holimo ka har'a 200ml volumetric flask e kenngoa ka har'a incubator ea 25 ± 1 ° C kapa bateng ea metsi e sa khaotseng ea mocheso. Ema lihora tse 24 ho etsa tharollo e tloaelehileng ea 4000NTU.
Turbidity Standard Tharollo
Kakaretso ea bophahamo ba ho itokisa e ne e le 100ml.
| Che. | Teko (NTU) | 400NTU Absorb Palo (ml) | 4000NTU Absorb Palo (ml) |
| 1 | 10 | 2.5 | – |
| 2 | 100 | 25 | 2.5 |
| 3 | 400 | – | 10 |
| 4 | 700 | – | 17.5 |
| 5 | 1000 | – | 25 |
Mokhoa oa ho etsa: A=K*B/C
- A: Monya bongata (ml)
- B: Kholiso ea tharollo e hlokahalang ho etsoa (NTU)
- C: Proto-standard liquid concentration (NTU)
- K: Kakaretso ea boitokiso (ml)
Example: 10 NTU turbidity standard solution configuration method
Hlakola 2.5ml (tekanyo e ne e le 400 NTU) phetisetso ea tharollo ho 100ml volumetric flask, eketsa metsi a hloekisitsoeng kapa metsi a silafetseng 'me u hlapolle moleng oa 100ml, sisinya hantle 'me u sebelise ho lekanya.
Khokahano ea Valve ea Motlakase
Hokela lithapo ho tloha ho sensor ea turbidity ho ea ho molaoli ka tsela e latelang:
| Mmala | Tlhaloso |
| Khubedu | + 9-36 VDC |
| Ntsho | - VDC |
| Botala | RS485A |
| Bosoeu | RS485B |
- Hokela terata e mosehla ho theminale e nepahetseng ea taolo ea phepelo ea motlakase.
- Sebelisa terata e 'ngoe ho hokela terminal e ntle ea phepelo ea motlakase ho terminal e letšehali ea Relay 1 ka letoto.
- Hokela terminal e fosahetseng ea phepelo ea motlakase ho terminal e nepahetseng ea Relay 1.
TB800 Series Sensor - Controller Wiring
Ho lokisa Mokhoa oa ho Hloeka ka Boiketsetso ho Taolo ea TB800
Kena ho Menu:
- Eya ho Menu > Alamo
Beha Auto Clean Parameters:
- Auto Clean: Khetha "Auto Clean".
- Nako ea ho Hloeka: E behe motsotso oa 1 (nako eo valve ea motlakase e lulang e bulehile).
- Nako ea ho tima: E behe metsotso e 60 (nako eo valve ea motlakase e lulang e koetsoe).
Khetha Relay:
- Haeba terata e hoketsoe ho Relay 1, khetha Relay 1.
Lokisa Mokhoa o Hloekileng:
- Mokhoa o Hloekileng: Khetha "Tšoara".
- Kena Nako: 50 metsotsoana
Sephetho
- Motlakase oa motlakase o tla bula metsotso e meng le e meng ea 60 bakeng sa motsotso oa 1, ho boloka boleng ba turbidity bo sa fetohe nakong ena.
Tlhokomelo
Ho etsa bonnete ba hore ho na le liphello tse ntle ka ho fetisisa tsa tekanyo, ho hlokomeloa kamehla ho bohlokoa. Sena se kenyelletsa ho hloekisa sensor, ho hlahloba tšenyo, le ho lekola boemo ba eona ba ts'ebetso.
Ho Hloekisa Sensor
- Etsa ho hloekisa ka mokhoa o tloaelehileng ho latela maemo a tšebeliso ho boloka tekanyo ea tekanyo e nepahetseng
Tlhahlobo ea Tšenyo ea Sensor
- Hlahloba sensor bakeng sa tšenyo leha e le efe e bonahalang. Haeba ts'enyehelo e bonoa, ikopanye le ICON hang hang ho 905-469-7283 . Sena se thibela mathata a ka bakoang ke ho kenella ha metsi ka lebaka la tšenyo ea sensor.
Tiisetso
Warranty, Returns le Meeli
Tiisetso
- Icon Process Controls Ltd e fana ka tumello ho moreki oa pele oa lihlahisoa tsa eona hore lihlahisoa tse joalo li tla lokoloha ho tsoa bofokoling ba thepa le moetso tlas'a ts'ebeliso e tloaelehileng le ts'ebeletso ho latela litaelo tse fanoeng ke Icon Process Controls Ltd bakeng sa
- nako ea selemo ho tloha letsatsing la thekiso ea lihlahisoa tse joalo.
- Boitlamo ba Icon Process Controls Ltd tlasa waranti ena bo lekanyelitsoe feela ho lokisong kapa ho nkela sebaka, ho Icon Process Controls Ltd khetho, ea lihlahisoa kapa likarolo, tseo Icon.
- Tlhahlobo ea Process Controls Ltd e etsa qeto ea ho khotsofala ha eona hore e na le phoso ka thepa kapa moetso nakong ea tiisetso.\
- Icon Process Controls Ltd e tlameha ho tsebisoa ho latela litaelo tse ka tlase mabapi le tseko efe kapa efe tlasa waranti ena
- matsatsi a mashome a mararo (30) a qoso efe kapa efe ea khaello ea tumellano ea sehlahisoa. Sehlahisoa sefe kapa sefe se lokisoang tlas'a tiisetso ena se tla tiisetsoa feela bakeng sa nako e setseng ea tiisetso ea pele.
- Sehlahisoa sefe kapa sefe se fanoeng e le phetisetso tlas'a tiisetso ena se tla fuoa tumello ea selemo se le seng ho tloha ka letsatsi la phetoho.
E khutla
- Lihlahisoa li ke ke tsa khutlisetsoa ho Icon Process Controls Ltd ntle le tumello ea pele. Ho khutlisa sehlahisoa seo ho nahanoang hore ha se na phoso, e-ea ho www.iconprocon.com, 'me u romele foromo ea kopo ea ho khutlisa moreki (MRA) 'me u latele litaelo tse ho eona. Tsohle
- waranti le lihlahisoa tseo e seng tsa tiisetso li khutlela ho Icon Process Controls Ltd li tlameha ho romelloa li lefshoe esale pele le ho fuoa inshorense. Icon Process Controls Ltd e ke ke ea ikarabella bakeng sa lihlahisoa life kapa life tse lahlehileng kapa tse senyehileng ka har'a thomello.
Mefokolo
Tiisetso ena ha e sebetse lihlahisoa tse latelang:
- li fetile nako ea tiisetso kapa ke lihlahisoa tseo moreki oa pele a sa lateleng mekhoa ea tiisetso e boletsoeng ka holimo;
- ba senyehile motlakase, mochini kapa lik'hemik'hale ka lebaka la tšebeliso e sa nepahalang, ka phoso kapa ka bohlasoa;
- li fetotsoe kapa li fetotsoe;
- mang kapa mang ntle le basebeletsi ba litšebeletso ba lumelletsoeng ke Icon Process Controls Ltd ba lekile ho lokisa;
- ba 'nile ba ameha likotsing kapa likoluoa tsa tlhaho; kapa
- li senyehile nakong ea ho romelloa ho Icon Process Controls Ltd
Icon Process Controls Ltd e na le tokelo ea ho tlohela tiisetso ena ntle le lehlakore le ho lahla sehlahisoa sefe kapa sefe se khutliselitsoeng ho Icon Process Controls Ltd moo:
- ho na le bopaki ba ntho e ka bang kotsi e teng ka sehlahisoa;
- kapa sehlahisoa se lutse se sa qosoe ho Icon Process Controls Ltd ka matsatsi a fetang 30 kamora hore Icon Process Controls Ltd e kope ka nepo hore e sebelisoe.
Tiisetso ena e na le waranti e le 'ngoe feela e hlahisoang ke Icon Process Controls Ltd mabapi le lihlahisoa tsa eona. LITIISETSO TSOHLE TSE EKETSEHILENG, HO kenyeletsoa ntle le MOEDI, LITIISETSO TSA HO REKA LE HO LOKELANG HO SEBELISA MAIKAO A KHETHEHILENG, LI HLAHISITSOE KA HO BONAHALA. Litlhare tsa tokiso kapa tse ncha joalo ka ha ho boletsoe ka holimo ke litlhare tse ikhethileng bakeng sa ho tlola tiisetso ena. HA HO TSOHLE Icon Process Controls Ltd E TLA BA MOLATO BAKENG SA LITšenyo life kapa life tse hlahileng kapa tse lahleloang ke mofuta ofe kapa ofe, HO kenyeletsoa thepa ea hau kapa ea SEBELE KAPA BAKENG SA MOTHO O MANG KAPA MANG. TIISETSO ENA E HLOMELA POLELO EA HO QETELA, E PHETHAHETSENG LE E KHETHEHILENG EA MELAO EA TIISETSO MME HA HO MOTHO EA DUMELLOTSOANG HO ETSA LITEKISO TSE LING KAPA TSE LING LEHAFENG LA Icon Process Controls Ltd. Tiisetso ena e tla hlalosoa ho latela melao ea Ontario, Canada.
Haeba karolo leha e le efe ea tiisetso ena e nkoa e sa sebetse kapa e sa qobelloe ka lebaka leha e le lefe, ho fumana ho joalo ho ke ke ha etsa hore tokisetso e 'ngoe ea tiisetso ena e se ke ea sebetsa.
TS'ELISO
Bakeng sa litokomane tse ling tsa sehlahisoa le tšehetso ea tekheniki etela:
- www.iconprocon.com
- lengolo-tsoibila: sales@iconprocon.com or
- support@iconprocon.com
- Ph: 905.469.9283
- ProCon® - TB800 Series Low Range Turbidity Sensor
- ICON-Free Corrosion-Free PROCESS ULAOO Equipment™
- 24-0605 © Icon Process Controls Ltd.
Litokomane / Lisebelisoa
 | ProCon TB800 Series Low Range Turbidity Sensor [pdf] Bukana ea Mosebelisi Series-T, Series-B, TB800 Series Low Range Turbidity Sensor, TB800 Series, Low Range Turbidity Sensor, Range Turbidity Sensor, Turbidity Sensor, Sensor |
