WWP V3 MS Group Controller e Wired Wall Pad Controller
“
Litlhaloso tsa Sehlahisoa:
- Mohlala: WWP V3 MS_2024.V1
- Mesebetsi: Pholiso, Dehumidification, Ho futhumatsa, Ventilation,
Auto Mode - Taolo: Sehokelo sa pad pad
- Mesebetsi ea Sebapa-nako: Nako ea ho Qetella, Nako ea Nako
- Mesebetsi e Khethehileng: Mokhoa oa ho Robala, Ts'ebetso ea Swing, Lock Lock
Mosebetsi
Litaelo tsa Tšebeliso ea Sehlahisoa:
Ho theha Yuniti:
- Sebelisa screwdriver ho tlosa screw ka tlase ho
unit. - Latela setšoantšo sa wiring ho se hokahanya le FCU.
Ho sebetsana le Wall Pad:
- Ho khetha mokhoa: Pholiso, Dehumidification, Ho futhumatsa,
Ventilation, kapa Auto mode, tobetsa konopo e tsamaisanang le eona. - Ho fetola lebelo la fan, tobetsa konopo ea ho seta lebelo (0=Auto
lebelo, 1=Lebelo le tlase, 2=Lebelo le mahareng, 3=Lebelo le phahameng).
Seta Linako:
- Tobetsa 'me u tšoare metsotsoana e 5 ho seta letsatsi la hajoale la
beke. Sebelisa metsu ho fetola ho tloha Mantaha ho Sontaha. - Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa hang ho seta
nako ya jwale. Sebelisa metsu ho fetola nako. - Ho seta Timer ON mosebetsi:
- Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa habeli. Sebelisa
metsu ho beha letsatsi la beke le nako. - Tobetsa ho bulela kapa ho tima tshebetso ya Timer ON.
- Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa habeli. Sebelisa
- Ho seta ts'ebetso ea Timer OFF:
- Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa hakhutšoanyane makhetlo a mararo. Sebelisa
metsu ho beha letsatsi la beke le nako. - Tobetsa ho bulela kapa ho tima tšebetso ea Timer.
- Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa hakhutšoanyane makhetlo a mararo. Sebelisa
Mesebetsi e Eketsehileng:
- Ho seta yuniti ea mocheso, tobetsa makhetlo a 6 ho fihlela U00
e hlaha. - Ho notlela/ho notlolla skrine, tobetsa metsotsoana e 5.
- Ho kenya/ho tima tshebetso ya ho swing, tobetsa bakeng sa 5
metsotsoana. - Ho kenya tshebetsong/ho tima mokgwa wa ho robala, tobetsa metsotsoana e 5.
Ho Khetha Aterese ea Yuniti:
- Tobetsa o hatelle metsotsoana e 5, ebe o tobetsa hakhutšoanyane makhetlo a mahlano.
Tobetsa kapa ho fetola yuniti aterese (0 bakeng sa diyuniti kaofela kapa 1-32 bakeng sa
diyuniti tse itseng). - Hang ha li-unit li se li khethiloe, sebelisa pente ea lebota joalo ka
ho latela litaelo tsa mosebelisi tse kaholimo.
Lipotso Tse Botsoang Khafetsa (FAQ):
P: Nka fetola lebelo la fan joang?
A: Tobetsa konopo ea ho seta lebelo la fan ho potoloha Auto
lebelo, lebelo le tlase, lebelo le mahareng, le likhetho tse phahameng tsa lebelo.
P: Ke notlela/notlolla skrine joang?
A: Tobetsa 'me u tšoare metsotsoana e 5 ho notlela skrine. Pheta hape
ketso ya ho e notlolla.
P: Ke beha mesebetsi ea Timer joang?
A: Latela litaelo tse fanoeng bukeng ea mosebelisi ho seta
Mesebetsi ea Timer-ON le Timer-OFF e ipapisitse le seo u se batlang
kemiso.
"`
WWP V3 MS_2024.V1
Tshebetso Guide
# Tšōmo
#
S1 Mantaha
S16
S2 Labobeli
S17
S3 Laboraro
S18
S4 Labone
S19
S5 Labohlano
S20
S6 Moqebelo
S21
S7 Sontaha
S22
S8 Nako ea ho Qetella
S23
S9 Timer-ON nako S24 (Ha Selaela-nako se timile: Nako ea hajoale)
S10 Nako ea ho tima
S25
Nako ea S11 Nako ea S26
Mokhoa oa ho Pholisa oa S12
S27
S13 Dehumidification S28
Mokhoa oa ho futhumatsa oa S14 S29
S15 Ventilation Mode S30
Tšōmo
Auto Mode Moemo oa ho robala Mokhoa oa ho sisinyeha oa senotlolo sa LED Ho beha Mocheso Mocheso oa Kamore
Pontšo ea Lintlha
Fahrenheit degree Celsius Fan 0-Auto / 1-Low 2 Mahareng / 3 – Holimo.
connect@polarglobalgroup.com www.polaraircs.com
# Tšōmo
Aterese ea yuniti ea S31 S32 Unit No. / Khoutu ea phoso S33 Nako ea beke le beke S34 S35 S36 S37 S38 Konopo ea ho Bula/E tima S39 Mokhoa oa ho beha
S38 On/Off Button S39 Mode setting S40 Fan speed setting S41 Parameter setting S42 Up S43 Down
1
WWP V3 MS_2024.V1
connect@polaglobalgroup.com
www.polaraircs.com
2
Sebelisa screwdriver ho tlosa screw ka tlase
WWP V3 MS_2024.V1
Latela setšoantšo sa wiring ho se hokahanya le FCU
connect@polaglobalgroup.com
www.polaraircs.com
3
WWP V3 MS_2024.V1
[S38] Konopo YA HO TALA/TLOA Tobetsa konopo ho bulela. E tobetse hape ho e tima Konopo ea [S39] MODEHa lebone la lebota le buletsoe, tobetsa a) Cooling b) Dehumidification c) Ho futhumatsa
ho khetha ka tatellano: d) Ventilation kapa, e) Auto mode
[S40] Konopo ea LEbelo la FANTobetsa ho fetola ho tloha ho: a) 0=Lebelo la Auto b) 1=Lebelo le tlase
c) 2=Lebelo le mahareng d) 3=Lebelo le phahameng
[S41] TIMER PARAMETER Tlhophiso1. Tobetsa metsotsoana e 5 ho seta letsatsi la hajoale la beke, ebe o tobetsa
or
ho fetoha ho tloha
Mantaha ho isa Sontaha
2. Tobetsa metsotsoana e 5, ebe u e tobetsa hang ho seta nako ea hajoale. Tobetsa
or
ho
fetola nako
3. Tobetsa metsotsoana e 5, ebe u e tobetsa habeli ho seta tšebetso ea "Timer ON". Mosebetsi oa "Timer ON" o sebelisetsoa ho beha nako kapa letsatsi le itseng la hore yuniti e butsoe.
3.1. Tobetsa 3.2. Tobetsa
ho beha letsatsi la beke (ho tloha ka Mantaha ho fihlela Sontaha)
or
ho fetola nako ea "Timer ON".
3.3. Tobetsa ho bulela kapa ho tima tšebetso ea "Timer ON", 'me u tla hlokomela hore S8 (Timer ON Led) ea hlaha kapa ea nyamela.
4. Tobetsa metsotsoana e 5, ebe u e tobetsa hakhutšoanyane makhetlo a 3 ho seta tšebetso ea "Timer OFF". Mosebetsi oa "Timer OFF" o sebelisetsoa ho beha nako kapa letsatsi le itseng la ho tima yuniti.
4.1. Tobetsa 4.2. Tobetsa
ho beha letsatsi la beke (ho tloha ka Mantaha ho fihlela Sontaha)
or
ho fetola nako ea "Timer OFF".
4.3. Tobetsa ho bulela kapa ho tima tšebetso ea "Timer OFF", 'me u tla hlokomela hore S10 (Timer OFF Led) ea hlaha kapa ea nyamela.
connect@polaglobalgroup.com
www.polaraircs.com
4
WWP V3 MS_2024.V1
[S41] FETOHA DEGREE PARAMETER Setting1. Tobetsa metsotsoana e 5, ebe o tobetsa hakhutšoanyane
2. Tobetsa
or
ho fetola:
a. 0 = Degree C
b. 1 = Degree F
bakeng sa linako tse 6 ho beha yuniti ea mocheso. U00 e hlaha.
TS'OELETSO TLOTLISO
1) Tobetsa
bakeng sa metsotsoana e 5, S19 ea hlaha, 'me skrine se notletsoe.
2) Tobetsa
bakeng sa metsotsoana e 5 hape; S19 ea nyamela, 'me skrine e notletsoe.
MOKHATLO MOKHOA
1) Tobetsa
bakeng sa metsotsoana e 5, S18 ea hlaha, 'me swing e ON.
2) Tobetsa
bakeng sa metsotsoana e 5 hape; S18 ea nyamela, 'me swing e TIMA.
MOKHOA OA HO ROBALA 1) Tobetsa metsotsoana e 5, S17 ea hlaha, 'me mokhoa oa ho robala o ON 2) Tobetsa metsotsoana e 5 hape, S17 e nyamela,' me mokhoa oa ho robala o TLOHILE.
Ho khetha aterese ea yuniti e tla laoloa:
1) Tobetsa metsotsoana e 5, ebe o tobetsa hakhutšoanyane makhetlo a 5, tobetsa
or
aterese.
a) 0 sebelisoa ho laola likarolo tsohle
b) Ho tloha ho 1 - 32 ho sebelisoa ho laola karolo e itseng ea aterese
ho fetola yuniti
2) Hang ha yuniti kapa likarolo tsohle li khethiloe, sebelisa pampiri ea lebota joalo ka ha ho hlalositsoe ho litaelo tsa mosebelisi tse kaholimo.
TLHOKOMELISO EA BOHLOKOA:
WWP3-MS ha e khone ho fetola aterese ea yuniti. Haeba u hloka ho etsa joalo, ka kopo sebelisa WWP3 e tloaelehileng, ka BMS ho fetola paramethara ea Modbus 300004 kapa u sebelise e lokiselitsoeng esale pele ho tsoa fekthering.
connect@polaglobalgroup.com
www.polaraircs.com
5
WWP V3 MS_2024.V1
Tlhaloso ea Phoso
Phoso ea kutlo ea mocheso oa kamore
Indoor coil sensor 1 e hloleha
Indoor coil sensor 2 e hloleha
Phoso ea ho phaphamala
Tšireletso ea ka hare ea khoele ea mocheso o tlase oa mocheso oa ka tlung Tšireletso e feteletseng ea mocheso
Khoutu Lebaka
Tharollo
1. Sheba hore na Tr plug e hokahane kapa
Sensor ea kamore ha e hloekisoe.
E1 kapa e senyehile.
2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1. Sheba hore na plug ea Ti1 e hokahane kapa
E2
Sensor ea Ti1 e ntšitsoe kapa che.
senyehile.
2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1. Sheba hore na plug ea Ti2 e hokahane kapa
E3
Sensor ea Ti2 e ntšitsoe kapa che.
senyehile.
2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1. Hlahloba hore na phala ea metsi ea condensate
E4
Swipe ea float e butsoe.
e hokahane kapa che. 2. Sheba hore na pompo e sebetsa kapa
eseng.
E5 mocheso oa metsi. <3 ºC.
Sheba mocheso oa metsi.
E6 Mocheso oa metsi. > 70 ºC.
Sheba mocheso oa metsi
E7 Filter switch e butswe.
Fetola kapa hloekisa sefe.
Ho hloleha ha Heater ea Motlakase EC motor motor (CN4)
Ke tsa liyuniti tse nang le EH feela. E8 EH polokeho switjha ke
bula.
E9 Ha ho maikutlo a motlakase oa EC
1. Fetola lebelo la fan ho ea holimo. 2. Kenya sebaka sa sesebelisoa sa polokeho sa EH se senyehileng. 1. Sheba boemo ba Modbus.
2. Sheba motlakase oa EC.
EC motor failure (CN5)
Phoso ea ho beha koloi qty (S6 PCB) 1 Tšireletso e khahlanong le leqhoa
Ho hloleha ha coil sensor 3 ka tlung (S6 PCB) 1
E10 Ha ho maikutlo a motlakase oa EC
1. Sheba boemo ba Modbus. 2. Sheba motlakase oa EC.
E11 Motor Qty phoso ea ho beha 1: hlahloba boemo ba Modbus
E12
Ha yuniti e eme, Tr <2ºC.
1. Bulela yuniti ho boloka Tr e phahame ho feta 5ºC
1. Sheba hore na plug ea Ti3 e hokahane kapa
E13
Sensor ea Ti3 e hanngoe kapa e senyehile.
eseng. 2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1 E sebetsa feela ho Mefuta ea S6 PCB
connect@polaglobalgroup.com
www.polaraircs.com
6
WWP V3 MS_2024.V1
Tlhaloso ea Phoso
Ho hloleha ha coil sensor 4 ka tlung (S6 PCB) 2
Ho hloleha ha sensor ea PM2.5 (S6 PCB) 2
Ho hloleha ha sensor ea AQI (S6 PCB) 2
Ho hloleha ha Wired Wall Pad
Khoutu Lebaka
Tharollo
1. Sheba hore na plug ea Ti4 e hokahane kapa
E14
Sensor ea Ti4 e hanngoe kapa e senyehile.
eseng. 2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1. Sheba hore na plug ea PM2.5 e hokahane
E15
Sensor ea PM2.5 e ntšitsoe kapa che.
kapa e senyehile.
2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
1. Sheba hore na AQI plug e hokahane kapa
E16
Sensor ea AQI e ntšitsoe kapa che.
senyehile.
2. Sheba hore na khanyetso ea sensor e teng
e nepahetse kapa che.
WWP e ntšitsoe kapa che
E17 hantle
Sheba li-plug
connect@polaglobalgroup.com
www.polaraircs.com
7
Litokomane / Lisebelisoa
 | POLARAIR WWP V3 MS Sehlopha Taolo ea Sehlopha sa Wired Wall Pad Controller [pdf] Tlhophiso Tataiso WWP V3 MS, WWP V3 MS Group Controller Wired Wall Wall Pad Controller, Sehlopha sa Taolo ea Wired Wall Pad Controller, Controller Wired Wall Pad Controller, Wired Wall Pad Controller, Wall Pad Controller, Controller |