Tokomane

OWLLON TNS-0117 Dobe Wireless Gamepad Bakeng sa Nintendo Switch Pro Controller Manual
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Selelekela sa tlhahiso:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Setšoantšo sa Setšoantšo:

Setšoantšo sa Sehlahisoa
Setšoantšo sa Sehlahisoa

Function Diagram:

Lebitso la Mosebetsi Is there a function? Mantsoeng a
Khokahano ea lithapo tsa USB E  
Khokahano ea Bluetooth Support  
Mokhoa oa ho kopanya N-S PC mode  
Six-axis gravity induction E  
Senotlolo E  
B senotlolo E  
X senotlolo E  
Y senotlolo E  
- senotlolo E  
+ senotlolo E  
L key E  
R senotlolo E  
ZL key E  
ZR key E  
Senotlolo sa lapeng E  
Print Screen key function E  
3D joystick (ts'ebetso e ka ho le letšehali ea 3D joystick) E  
Senotlolo sa L3 (tobetsa konopo ea 3D ka ho le letšehali) E  
R3 key (right 3D joystick press key function) E  
Cross key function E  
TUBRO speed regulation function E  
Connecting indicators E  
Motor vibration intensity adjustment E  
Ntlafatso ea taolo Support  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Charging Indication and Charging Characteristics:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Ho robala ka boithaopo:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Seta-automatic TURBO setting setting: tobetsa konopo ea TURBO ebe u e beha e le senotlolo sa ts'ebetso ea TURBO ha ho hlokahala, ebe u ka qeta litlhophiso ka katleho.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Hlakola linotlolo tsa ts'ebetso tsa TURBO tse behiloeng:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% amptsebo.

USB Connection Function:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Lisebelisoa tsa motlakase:

Item Reference value
Sebetsa voltage DC 3.6-4.2V
Ho sebetsa hona joale 24mA
Hona joale ea boroko 22.5uA
Vibration hona joale 82 mA~130 mA
Matla a ho kenya DC 4.5~5.5V/400mA
betri tlala 500mAh
Sebaka se sebetsang 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Litaba Tse Hlokang Tlhokomelo:

  • This product should be well kept when not in use.
  • Sehlahisoa sena se ke ke sa sebelisoa le ho bolokoa sebakeng se mongobo.
  • Sehlahisoa sena se lokela ho sebelisoa kapa ho bolokoa ka ho qoba lerole le meroalo e boima ho netefatsa bophelo ba eona ba ts'ebeletso.
  • Ka kopo u se ke ua sebelisa sehlahisoa se kolobisitsoeng, se soahlamaneng kapa se robehileng se nang le mathata a ts'ebetso ea motlakase a bakoang ke tšebeliso e fosahetseng.
  • Se ke oa sebelisa lisebelisoa tse futhumatsang tsa kantle joalo ka lionto tsa microwave bakeng sa ho omisa.
  • Haeba e senyehile, ka kopo e romelle lefapheng la tlhokomelo bakeng sa ho lahloa. U se ke ua e qhaqholla u le mong.
  • Basebelisi ba bana ba tla sebelisa sehlahisoa sena hantle tlas'a tataiso ea batsoali, 'me u se ke ua lemalla papali.

Tlhokomeliso ea FCC:

Sesebelisoa sena se latela karolo ea 15 ea Melao ea FCC. Ts'ebetso e latela maemo a mabeli a latelang:

  1. Sesebediswa sena se ke ke sa baka tshitiso e kotsi, mme
  2. sesebediswa sena se tlameha ho amohela tshitiso efe kapa efe e amohetsweng, ho kenyeletswa le tshitiso e ka bakang tshebetso e sa rateheng.

Liphetoho leha e le life kapa liphetoho tse sa amoheloeng ka ho hlaka ke mokha ea ikarabellang bakeng sa ho latela li ka hlokisa matla a mosebelisi ts'ebeliso ea lisebelisoa.

Hlokomela: Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo.
Sesebelisoa sena se hlahisa matla ebile se ka hlahisa matla a maqhubu a seea-le-moea, 'me haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi likhokahanong tsa seea-le-moea. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi kamohelong ea seea-le-moea kapa thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

  • Khutlisa kapa u fallise lenakana le amohelang.
  • Eketsa karohano lipakeng tsa lisebelisoa le seamohedi.
  • Kopanya lisebelisoa ka sehokelo sa potoloho e fapaneng le eo seamoheli se hokahantsoeng le eona.
  • Ikopanye le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea / TV bakeng sa thuso.

Sesebelisoa se se se lekantsoe ho fihlela tlhoko e akaretsang ea tlhahiso ea RF. Sesebelisoa se ka sebelisoa maemong a pepesehang habonolo ntle le thibelo.

Litokomane / Lisebelisoa

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Buka ea Mosebelisi
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa. masimo hlokahala di tšoauoa *