Micron Electronics Prime LS100 LTE Tracker

Selelekela

Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.

Sehlahisoa se Felileview

Ponahalo

Buttons Interface Description

Button /USB Interface Description

KEY/interface

Tlhaloso

Seta Senotlolo Power off     the Prime LS100
adaptara Connected to a Power supply socket can power on Prime LS100
Senotlolo sa Ts'ebetso Mokhoa oa SOS
Feature Key Play to do list audios.
TEST Key Mokhoa oa teko
Tlhaloso ea LED


Setšoantšo sa 1-2

There are 3 LED lights in Prime LS100 device, the description as following.

leseli Event State
Function Key LED Function Key pressed Solid when pressed
Feature Key LED Feature Key pressed Solid when pressed
Test Key LED Test Key pressed Solid when pressed
Breath Light Test Key long press Breath effect

Rea qala

likarolo List

lebitso

Picture

mantsoe

Prime LS100 Base Station The LTE Base Station.
Prime LS100 adapter It used to power on the Prime LS100.
A haha-ka Battery

The following items are suggestion for built-in battery usage, please pay more attention.

  • The device is Emergency call equipment, which is designed to be used by adapter always plugged.
  • There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.

Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.

Prime LS100 Adapter

Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).

Power on / Power tima


Setšoantšo sa 2-2

Matla ho: Plug in the power adapter and power on.
Ho tima: Unplugged the power adapter and press the Reset button.

Hlokomela: the user can not power off Prime LS100 if the adapter is plugged.

maqhubu

LTE: Band2/Band4/Band5/Band12/Band13
WIFI::2412MHz-2462MHz
BLE:2412MHz-2472MHz
433:433.92MHZ

Trouble shooting and Safety info

Ho batle phoso

Bothata

Lebaka le ka bang teng

tharollo

Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN.
The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet.
Unable to power off Prime LS100. The function of power key was disabled by AT+GTFKS. Enable the function of power key by AT+GTFKS.
Battery can not be charged The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
Safety info

The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.

Tlhokomeliso ea FCC.

§ Litlhoko tsa ho ngolla 15.19.
Sesebelisoa sena se latela karolo ea 15 ea Melao ea FCC. Ts'ebetso e latela maemo a hore sesebelisoa sena se se ke sa baka tšitiso e kotsi.

§ Tlhahisoleseling ho 15.21 ho mosebelisi.
Liphetoho leha e le life kapa liphetoho tse sa amoheloeng ka ho hlaka ke mokha ea ikarabellang bakeng sa ho latela li ka hlokisa matla a mosebelisi ts'ebeliso ea lisebelisoa.

Tlhahisoleseling ea 15.105 ho mosebelisi.
Tlhokomeliso: Sesebelisoa sena se lekiloe mme sa fumanoa se latela meeli ea sesebelisoa sa dijithale sa Class B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka ts'ireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo. Sesebelisoa sena se hlahisa matla ebile se ka hlahisa matla a maqhubu a seea-le-moea 'me, haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi lipuisanong tsa seea-le-moea. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi kamohelong ea seea-le-moea kapa ea thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:
-Ka nchafatsa kapa oa fallisetsa lenakana.
Eketsa karohano lipakeng tsa lisebelisoa le seamohedi.
Hokela thepa hore e be sehokelo sa potoloho e fapaneng le eo seamoheli se hokahantsoeng le eona.
-Botsa mohoebi kapa setsebi sa radio / TV se nang le boiphihlelo bakeng sa thuso.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.

Litokomane / Lisebelisoa

Micron Electronics Prime LS100 LTE Tracker [pdf] Buka ea Mosebelisi
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker

Leave ka tlhaloso

aterese ya hao ya imeile ke ke ho phatlalatswa.