PWM-60-KN Series 60W Constant Voltage PWM Output KNX LED Driver
Litlhaloso
- Mohlala: PWM-60-12, PWM-60-24
- DC Moqtage: 12V, 24V
- E Fanoe Hajoale: 5A, 2.5A
- Rated Power: 60W
- Output Dimming Range: 0 - 100%
- PWM Frequency (Mofuta.): 200 - 4000Hz (mosebelisi
e ka fetoloang ka ETS) - Seta, Nako ea ho Phahamisa: 500ms, 80ms / 115VAC kapa
230VAC - Nako ea ho ema (Mofuta): 16ms / 115VAC kapa
230VAC - Moqtage Range: 90 - 305VAC, 127 - 431VDC
- Marang-rang: 47 - 63Hz
- Power Factor (Mofuta.): PF > 0.97 / 115VAC, PF
> 0.95 / 230VAC, PF > 0.92 / 277VAC @ mojaro o felletseng - Kakaretso ea Khopamiso ea Harmonic: THD <20%
- Sebetsa (Mofuta.): 86%
- AC Hajoale (Mofuta.): 0.8A / 115VAC, 0.4A /
230VAC, 0.32A / 277VAC - Inrush Current (Mofuta.): Ho qala ho batang 50A
(twidth=350s e lekantsoe ho 50% Ipeak) ho 230VAC - Max. Nomoro ea li-PSU ho 16A Circuit Breaker: 9
li-unit (circuit breaker ea mofuta oa B) / 16 units (circuit breaker of
mofuta C) ho 230VAC
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Etsa bonnete ba hore mohloli oa matla o kopana le voltage le khafetsa
litlhoko tse boletsoeng bukeng ea tataiso. - Hokela mokhanni oa LED mohloling oa matla ka mor'a mohala
setšoantšo se fanoeng. - Beha mokhanni oa LED sebakeng se nang le moea o pholileng hole le ho otloloha
khanya ea letsatsi le mongobo.
Setupo sa Dimming
Ho lokisa sebaka sa dimming, latela mehato ena:
- Fumana litlhophiso tsa dimming ka sebopeho sa ETS.
- Khetha liperesente tse batloang tsa dimmingtage ka hare ho sebaka sa 0 ho
100%. - Netefatsa ts'ebetso ea ho fifala ka ho lekola LED e hokahaneng
lisebelisoa.
Ho batle phoso
Haeba u kopana le mathata leha e le afe ka mokhanni oa LED, sheba ho
karolo ea ho rarolla mathata ea bukana kapa ikopanye le ts'ehetso ea bareki
bakeng sa thuso.
LBH
P: A na nka sebelisa mokhanni ona oa LED o nang le lisebelisoa tsa LED tse sa bonahaleng?
A: E, PWM-60-KN letoto la lihlooho tse mokhanni LED tšehetsa dimmable LED
lisebelisoa tse ka har'a sebaka se boletsoeng sa dimming.
P: Nka fetola maqhubu a PWM joang?
A: Lebelo la PWM le ka fetoloa ka sebopeho sa ETS joalo ka
ho latela litaelo tsa tataiso tsa mosebelisi tse fanoeng.
Q: Ke palo e ka holimo ho palo ea bakhanni ba LED e ka bang
e hokahane le sekhechana sa potoloho sa 16A?
A: Palo e kholo ea bakhanni ba LED e itšetlehile ka mofuta oa
sekhetla se sebedisoang. Ka kopo sheba bukana ea litaelo bakeng sa lintlha tse tobileng
lintlha.
PWM – 6 0 – KN 60W Constant Voltage PWM Output KNX LED Driver
letoto
Buka ea Mosebelisi
– ()
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
Letoto la lihlooho tse PWM-60-KN
TS'ELISO
MOHLALA
EA-60-PW
EA-60-PW
DC VOLTAGE
12V
24V
RETŠELISITSOE NKHOANE
5A
2.5A
REKETSO MATLA
60W
60W
SEHLOOHO DIMMING RAELE
0 ~ 100%
PWM FREQUENCY (Mofuta) 200 ~ 4000Hz mosebedisi o ka fetoha ka ETS
SETUP, TSOHA NAKO Hlokomela.2 500ms, 80ms/ 115AC kapa 230VAC
NAKO EA HO PHETHA (Mofuta.)
16ms / 115VAC kapa 230VAC
TLHOKOMELOTAGE RANGE Hlokomela. 3
90 ~ 305VAC 127 ~ 431VDC (Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC")
MOEKETSENG MAKOANE
47 ~ 63Hz
SEBETSO SA MATLA (Typ.)
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ full load (Ka kopo, sheba karolo ea “POWER FACTOR (PF) CHARACTERISTIC”)
PHETHAHETSO EA HARMONIC
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Ka kopo, sheba karolo ea "TOTAL HARMONIC DISTORTION")
KEKETSO
SEBELISA (Mofuta) AC CURRENT (Mofuta) INRUSH CURRENT (Mofuta.)
86%
89%
0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC COLD QALA 50A (twidth = 350s e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410
MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER
Li-unit tse 9 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 16 (sekheo sa potoloho sa mofuta oa C) ho 230VAC
LEAKAGE NKHOANE
<0.25mA / 277VAC
<0.5W
KHAHLISA
108 ~ 130% e lekantsoe matla a tlhahiso ea Hiccup mode, e hlaphoheloa ka bo eona kamora hore boemo ba phoso bo tlosoe
POTOLOHO E KHUTSOANE
Koala o/p voltage, matlafatsa hape ho fola
TS'IRELETSO MOLULATAGE
15 ~ 17V Koala o/p voltage, matlafatsa hape ho fola
28 ~ 34V
HO EKETSEHILENG HO EKETSEHILENG Koala o/p voltage, matlafatsa hape ho fola
MOSEBETSI TEMPELA.
Tcase=-35 ~ +85 (Ka kopo, sheba karolo ea ” OUTPUT LOAD vs TEMPERATURE”)
MAX. TLHALOSO TEMPE.
Tcase=+85
MOSEBETSI MOKOBELO
20 ~ 95% RH e sa lumellaneng
POLOKO EA TIKOLOHO TEMP., MONATE -35 ~ +80, 10 ~ 95% RH
MOEKETSI. TIISETSO MOKHOA
± 0.03% / (0 ~ 50)
TSIETSO
10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z
TS'IRELETSO MAEMO
Hlokomela. 5
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 EAC TP TC 004 e amohetsoe
e ikemetseng, GB19510.14,GB19510.1,
MAEMO KHOTSO
Protocol e netefalitsoeng
EMELANG KOLOKOTAGE
TŠIRELETSO LE EMC
HO IKAOA KHANYETSO
TLHOKOMELISO EA EMC.6
I/PO/P:3.75KVAC
I/PO/P:100M Ohms / 500VDC / 25/70% RH
Ho lumellana le BS EN/EN55015, BS EN/EN61000-3-2 Sehlopha sa C (@load60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
EMC IMMUNITY MTBF
Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV),EAC TP TC 020
Lihora tse 2135.2K mets. Telcordia SR-332 (Bellcore); Lihora tse 247.7K min. EA-HDBK-217F (25)
BANGWE KHOLO
150*53*35mm (L*W*H)
PAKA
0.45Kg;30pcs/16.0Kg/1.0CUFT
HLOKOMELA
1. Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ka 230VAC, e lekantsoe hona joale le 25 ea mocheso o potolohileng. 2. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaasetages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. 3. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka baka keketseho ea nako ea ho seta. 4. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla ameha
ka ho kenya ka ho feletseng, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho boela ba tšoaneleha EMC Directive mabapi le ho kenya ka ho feletseng hape. (joalokaha e fumaneha ho https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Letoto lena le kopana le tebello e tloaelehileng ea bophelo ea > lihora tse 50,000 tsa ts'ebetso ha Tcase, haholo-holo tc point (kapa TMP, ho ea ka DLC ), e ka ba lilemo tse 75 kapa ka tlaase ho moo. 6. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's webSebaka sa marang-rang ho http://www.meanwell.com 7. Thempereichara ea tikoloho ea 3.5/1000m ka mefuta e se nang fan le ea 5/1000m e nang le mefuta ea fene bakeng sa bophahamo ba ho sebetsa ho feta 2000m(6500ft). 8. Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea bopaki ba metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
MOSEBETSI OA DIMMING
Letoto la lihlooho tse PWM-60-KN
AC/L(Sootho) AC/N(Putsoa)
PWM-60-KN
Molao-motheo oa dimming bakeng sa tlhahiso ea setaele sa PWM Dimming e fihlelleha ka ho fetola potoloho ea mosebetsi oa tlhahiso ea hajoale.
Output DC jwale ON
Io=0A
TLOA TONA
T
TON Duty cycle(%) =
×100%
T
Phatlalatso ea PWM ho fihla ho 4KHz
Vo+(Red) Vo-(E Ntsho) KNX+(Red) KNX-(E Ntsho)
KNXInterface Sebelisa lets'oao la KNX lipakeng tsa KNX+ le KNX-. Lenaneo la kopo(database) le ka khoasolloa ka Li-Catalogs tsa Marang-rang ho tsoa ho ETS kapa ka http://www.meanwell.com/productCatalog.aspx
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
OUTPUT LOAD vs TEMPERATURE
Letoto la lihlooho tse PWM-60-KN
Moroalo (%)
THD LOAD (%)
100
80 230VAC Kenyo feela
60 50 40
20
-35 -25 -10
0
15
30
50
60
AMBIENT TEMPERATURE,Ta ()
70 (HORIZONTAL)
Moroalo (%)
100
80 230VAC Kenyo feela
60
40
20
-35 -25 0
20
45
60
70
80
85 (HORIZONTAL)
Tcase ()
TŠOANELO STATIC
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
KEKETSO MOLAPOTAGE (V) 60Hz De-rating e ea hlokahala tlas'a phallo e tlaase ea voltage.
PUSELETSO EA TSOHLE EA HARMONIC (THD)
24V Model, Tcase ho 75
25
20
15
10
5
0
50%
60%
70%
80%
90%
MOJALO
115VAC 230VAC 277VAC
100%
SEBELISA(%)
PF
MATLA (PF) TŠEBELETSO
Tcase ka 75
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
MOJALO
115V 230V 277V
KATLEHO vs MOJARO
Letoto la PWM-60-KN le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 89% lits'ebetsong tsa masimong. 24V Model, Tcase ho 75
95
90
85
80
75
115V
70
230V
65
277V
60
55
50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
MOJALO
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
BOPHELONG
Letoto la lihlooho tse PWM-60-KN
BOPHELO NAKO(Kh)
120
100
80
60
40
20
0
25
35
45
55
65
75
85
Tcase()
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
Letoto la lihlooho tse PWM-60-KN
Setšoantšo se Thibeloang
SEFETA EMI
Ke / P
&
MOTS'ELISI
Fosc ea PFC: 50 ~ 120KHz PWM fosc : 60 ~ 130KHz
PFC TS'ELISO
HO FETOHA MATLA
OTP
OLP
PWM & PFC LAOLI
LITLHAKISO LE
MOHLASI
OLP
TS'ELISO TS'OOLO
LEMOHANG LETS'OA
OVP
Vo+ VoKNX+ KNX-
Tlhokomeliso: PWM fosc mona ha e amane le ho fifala ha PWM
Tlhaloso ea Mechini
Case No. PWM-60KN Unit: mm
AC/L(Sootho) AC/N(Putsoa)
300±20
150 KNX konopo ea lenaneo le LED 5
SJTW 18AWG×2C
4.5
tc 35
5
tc: max. Case Mocheso
Sehokelo sa KNX se kenyelelitsoe ka lebokoseng
300±10 Ul2464 18AWG×2C(Vo+,Vo-)
Ul2464 20AWG×2C(KNX+,KNX-) 350±10
Vo+(Red) Vo-(E Ntsho) KNX+(Red) KNX-(E Ntsho)
5 53
13 5
35
Mechini view ea ka kopo
AC/L(Sootho) AC/N(Putsoa)
Vo+(Red) Vo-(E Ntsho) KNX+(Red) KNX-(E Ntsho)
File Lebitso: PWM-60-KN-SPEC 2024-03-12
60W PWM Output KNX LED Driver
Khothaletsa Tataiso ea ho Nyoloha
Letoto la lihlooho tse PWM-60-KN
Tlhophiso ea Manual Connection bakeng sa mofuta oa KNX
AC/L(BROWN) AC/N(BUPUTSO)
Vo+(RED)
+
–
Vo-(BLACK)
KNX+(RED)
LED strip kapa kamehla voltagle bulb ea LED
KNX-(BLACK) PWM KN series e ka ba ETS adressing/programming KA NTLE ho hokela ho mains a AC.
Bese ea KNX
Litlhokomeliso Pele u qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, hakolla phepelo ea motlakase setsing sa motlakase. Netefatsa
hore e ke ke ea kopanngoa hape ka phoso! Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape, sebaka sa 10-15 cm se tlameha ho bolokoa neng
sesebelisoa se haufi ke mohloli oa mocheso. Ho phahamisa litloaelo ntle le mokhoa o tloaelehileng kapa ho sebetsa tlas'a mocheso o phahameng oa tikoloho ho ka eketsa
mocheso oa karolo e ka hare 'me o tla hloka ho fokotsa tekanyo ea tlhahiso ea hona joale. Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo, sheba
ho ea ka tlhaloso ea eona. Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli. U SE KE UA hokela "KNX- ho Vo-". Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Ho tloha ka EMC
ts'ebetso e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho tšoaneleha hape EMC Directive mabapi le ho kenya ka botlalo hape.
File Lebitso: PWM-60-KN-SPEC 2024-03-12
Litokomane / Lisebelisoa
 |
HO BOLELA HONA PWM-60-KN Series 60W Constant Voltage PWM Output KNX LED Driver [pdf] Buka ea Mong'a PWM-60-KN Series, PWM-60-KN Series 60W Constant Voltage PWM Output KNX LED Driver, 60W Constant Voltage PWM Output KNX LED Driver, Moqtage PWM Output KNX LED Driver, PWM Output KNX LED Driver, KNX LED Driver, LED Driver, Driver |