www.muoeng.com

Bukana ea Mosebelisi

9 ho 1 Multi-Sensor
A8-9

MCOHome A8-9 ke Z-Wave e nolofallelitseng li-sensors tse ngata tsa ho lekola tikoloho, ka 3.5 inch TFT e hlakileng e bonts'ang le e lumellanang le maemo a Z-Wave Plus. E hahiloe kahare ka mocheso, mongobo, PM2.5, CO2, VOC, PIR, khanya, Lerata, li-sensors tsa mosi. Sesebelisoa se ka kenyelletsoa marang-rang afe kapa afe a Z-Wave, 'me se tsamaisana le lisebelisoa life kapa life tse netefalitsoeng tsa Z-Wave.

• Mocheso: 0 ~ 50 ℃
• Mongobo: 0%RH~99%RH
• PM2.5: 0 ~ 500ug / m3
• CO2: 0 ~ 5000ppm
• VOC: 0-64000ppb
• PIR: 0 kapa 1 Detection angle ho fihlela ho 120 °
• Ho bonesoa: 0 ~ 40000Lux
• Lerata: 30dB ~ 100dB
• Mosi: 0 kapa 1

Tlhaloso

• Phepelo ea Matla: DC12V
• Boitlhopho: <3W
• Tikoloho ea mosebetsi: -20 ~ + 60 ℃ <99% RH (E seng condensation)
• Teba: 110 * 110 * 32mm
• Lesoba sekontiri se metsi: 60mm kapa 82mm
• Bolulo: Khalase e bonolo + PC Alloy
• Tlhomamiso: Wall-mounted (Lathe)

Boitsebiso ba Tšireletseho

Ho itšireletsa le ba bang kotsing le ho sireletsa sesebelisoa hore se se ke sa senyeha, ka kopo bala tlhahisoleseling ea polokeho pele u e sebelisa

Bohlokoa!

• Motlakase ea tšoanelehang ea nang le kutloisiso ea litšoantšo tsa wiring le tsebo ea polokeho ea motlakase o lokela ho phethela ho kenya ho latela litaelo.
• Pele o kenya, ka kopo netefatsa voltagE ikamahanya le lintlha tsa sesebelisoa. Khaola phepelo efe kapa efe ea motlakase ho tiisa polokeho ea batho le sesebelisoa.
• Ka nako ya ho instola, sireletsa sesebelisoa hore se se ke sa senyeha 'meleng ka ho se dihela kapa ho thula. Haeba ho etsahala, ka kopo ikopanye le mofani oa thepa bakeng sa tlhokomelo.
• Boloka sesebelisoa hole le acid-base le lintho tse ling tse senyehang, lintho tse metsi, likhase ho qoba tšenyo.
• Qoba ho itšunya-tšunya nakong ea ts'ebetso, ho sireletsa sesebelisoa ho senyeha ha mochini.
• Bala litaelo tsohle le litokomane tsohle 'me u li boloke bakeng sa ts'upiso ea nako e tlang.

Ho kenya & Wiring

Sebaka:
Sesebelisoa se khothalletsoa hore se kenngoe ka tlung, sebaka se nang le bophahamo ba 1.5m kaholimo ho fatše moo se emelang mohopolo oa kakaretso oa CO2. E lokela ho ba hole le mahlaseli a letsatsi, sekoaelo leha e le sefe, kapa mohloli ofe kapa ofe oa mocheso, ho qoba lets'oao la bohata la taolo ea mocheso.

Hlokomela!

1. Sesebelisoa se tlameha ho hlomelloa ka lebota se shebile holimo. U se ke ua e beha fatše kapa ua e phethola ha u ntse u sebetsa.
2. Se ke oa e beha ka lekhalo la moea, kapa ua e koahela ka tlase, e ka amang data e fumanoeng.

Mohato oa 1: Tlosa foreime ea tšepe ka morao ho sesebelisoa, ebe u e lokisa holim'a lebokose la ho kenya ka li-screws tse 2.
Mohato oa 2: Tlanya adapter.
Mohato oa 3: Khutlisetsa sesebelisoa ho foreime ea tšepe, e tla hokela le foreimi ka thata ka limakete tse hahelletsoeng.
Hata 4: Lekola ho kenya le matla, sesebelisoa se se se loketse mosebetsi.

Tshebetso

Koala / tima motlakase
Terata adaptara mme sesebelisoa se buletsoe. E tla bonts'a leseli lohle le fumanoeng ke li-sensor.

Sehokelo se bonts'ang
Hold Key F1 e ka chencha har'a li-interface tse 4 tse latelang:
1. Ho fumana lintlha: bonts'a lintlha tsohle tsa li-sensor
2. Marangrang: Z-Wave Eketsa / Tlosa
3. Ts'ebetso ea data: ho lekola lintlha tse fumanoeng ka letsoho
4. Nako ea sebaka sa heno

Ts'ebetso ea Z-Wave
Tlhokomeliso: Molaoli oa Z-Wave o nolofalitsoeng ke ts'ireletso o tlameha ho sebelisoa ho sebelisa sehlahisoa ka botlalo.
• Kenya & Tlosa marang-rang a Z-Wave
• Sebelisa mokhoa oa ho eketsa / ho tlosa tseleng. Ha sesebelisoa se sebelisoa, tšoara F1 ho khetha sebopeho bakeng sa marang-rang a Eketsa kapa a Tlose Z-Wave.

→ Tlanya F2 makhetlo a mahlano ho fihlela e fetoha putsoa.
→ Tšoara F2 'me sesebelisoa se kenelle molemong oa ho ithuta, ka nako eo e fetoha putsoa 'me sesebelisoa se eketsoa marang-rang a Z-Wave.
→ Latela mehato e ts'oanang ho tlosa sesebelisoa marang-rang.

Sehlopha sa Mokhatlo
Sesebelisoa se tšehetsa sehlopha sa mokhatlo o le mong:

AG se tsebahatsang	Max Node ID	Litlelase tsa Taelo	Boemo bo bakang
0x01	1	MELAO_Class _SENSOR_MULTIL MOTSOALLE_V5, SENSOR_MULTILE KHOTSO_V5	Boleng bo fumanoeng bo tla tlalehoa ho latela: 1, PM2.5 Phapang ea boleng lipakeng tsa boleng ba hajoale le boleng bo tlalehiloeng bo fetileng> 0x01 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 2, CO2 Phapang ea boleng lipakeng tsa boleng ba hajoale le boleng bo tlalehiloeng bo fetileng> 0x02 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 3, Mocheso Phapang ea boleng lipakeng tsa boleng ba hona joale le boleng bo tlalehiloeng bo fetileng> 0x03 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 4, Phokotso ea boleng ba mongobo lipakeng tsa boleng ba hajoale le boleng bo tlalehiloeng ba pejana> 0x04 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 5, VOC Phapang ea boleng lipakeng tsa boleng ba hajoale le boleng bo tlalehiloeng ba pejana> 0x05 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 6, Illumination Phapang ea boleng lipakeng tsa boleng ba hona joale le boleng bo tlalehiloeng bo fetileng> 0x06 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 7, Lerata Phapang ea boleng lipakeng tsa boleng ba hajoale le boleng bo tlalehiloeng ba pejana> 0x07 boleng bo behiloeng, boleng bo behiloeng ≠ 0; 8, PIR Boemo ba hajoale bo fapane le mmuso o tlalehiloeng pejana, boleng bo behiloeng ≠ 0; 9, Mosi Boemo ba hajoale bo fapane le maemo a fetileng a tlalehiloeng, beha boleng ≠ 0; 10, Smoke IntervalReport Timer sete value: 0x0A le boleng bo behiloeng ≠ 0; 11, PIR IntervalReport Timer sete boleng: 0x0B le boleng bo behiloeng ≠ 0; 12, PM2.5 IntervalReport Timer sete boleng: 0x0C le boleng bo behiloeng ≠ 0; 13, CO2 IntervalReport Timer set set value: 0x0D le boleng bo behiloeng ≠ 0; 14, Temperature IntervalReport Timer set set value: 0x0E le boleng bo behiloeng ≠ 0; 15, Humidity IntervalReport Timer set set value: 0x0Fand set boleng ≠ 0; 16, VOC IntervalReport Timer sete boleng: 0x10 le boleng ba sete ≠ 0; 17, Illumination IntervalReport Timer sete boleng: 0x11 le boleng bo behiloeng ≠ 0; 18, Noise IntervalReport Timer sete boleng: 0x12 le boleng ba sete ≠ 0;
		MELAO_Class _DEVICE_RESET_L HLOKO, DEVICE_RESET_LO LEBITSA_NOTIFICAT ION	Sethala sa fektheri se khutlisitsoe

Sehlopha sa Command se tšehelitsoe ke sesebelisoa: (E tšehetsa boemo ba S2 bo sa netefatsoang)
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_SENSOR_MULTILEVEL ，
COMMAND_CLASS_FIRMWARE_UPDATE_MD

Sehlopha sa Command se tšehelitsoe ke sesebelisoa: (Ha e tšehetse S2)
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_SECURITY_2,
TAOLO-LITLHAKU_TS'EBELETSO

Khutlisa Setting Factory

1, Tobetsa o tšoare F1 ho kenya Z-Wave setting interface, ebe o tobetsa & ts'oara F1 hape ho kenya paramethara setting interface;
2, Tobetsa o tšoare F2 ho kenya setting interface ebe o khetha "default";
3, Tobetsa F2 makhetlo a 3 ebe o bonts'a "OFF" -> "ON" -> "Ho lokile" -> "OFF", setlhophiso sa fektheri se khutlisitsoe.
Tlhokomeliso: Ka kopo sebelisa ts'ebetso ena ha feela molaoli oa mantlha oa marang-rang a le sieo kapa a sa sebetse

Ts'ebetso ea data
Tšoara F1 ho khetha sebopeho sa ho lekanya data. Ebe o ts'oara F2 ho chencha har'a li-sensor.
Khetha e le 'ngoe ebe u tobetsa F2, F1 ho fetola data. Kamora ho qeta, ts'oara F1 e ka khutlisa sebopeho sa ho fumana lintlha.

Ho ipehela nako ea lehae
Tšoara F1 ho khetha sebopeho sa nako ea lehae. Ebe o ts'oara F2 ho chencha "Hour-Minute-Second-Year-Month-Date". Tobetsa F2, F1 e ka fetola data ea ntho e halimang. Kamora ho qeta, ts'oara F1 e ka khutlisa sebopeho sa ho fumana lintlha.

Mefuta ea tafole

Eketsa	Paramethara		Dikgetho	Ea kamehla	Range
0x01	Lekala la PM25 Delta	1	= 0 Tima tlaleho > = 1 Tlaleha ha phetoho> N * 1ug / m3
0x02	Lekala la CO2 Delta	I	= 0 Tima tlaleho > = 1 Tlaleha ha phetoho> N * 5ppm	0	0-127
0x03	Temp_Delta_Level	1	= 0 Tima tlaleho > = 1 Tlaleha ha phetoho> n * 0.5 ° C	0	0-127
0x04	Mongobo_Delta_Level	I	= 0 Tima tlaleho > = 1 Tlaleha ha phetoho> n%	0	0-127
0x05	Lekala la VOC Delta	I	= 0 Tima tlaleho > = I-127 * 5ppb Phetoho ea Tlaleho	0	0-127
6	Lerato	2	= 0 Tima tlaleho > = Ke tlaleha ha phetoho> n * 1 Lux	0	0-32707
0x07	Lebelo la dB Delta	1	= 0 Tima tlaleho > = 1 Tlaleha ha phetoho> n * I dB	0	0-127
EA-08-TS	LETSATSI	I	= 0 Tima tlaleho = 1 Tlaleha phetoho	0	0- ke
0x09	Mosi oa Delta _ _ Boemo	I	= 0 Tima tlaleho = 1 Tlaleha phetoho	I	0-1
OxOA	Smoke_Timer		= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	60	0.35-3_7o7
MOKHATLO	Nako ea PIR	2 Clrl	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * Na karohano	60	0,35-32767
OxOC	PM25_Timer		= 0 Tima tlaleho - = 35 Tlaleha karohano e 'ngoe le e' ngoe ea n * 1 s	120	0,35-32767
LIEKETSENG	CO2_Timer	2	= 0 Tima tlaleho > = 35 Tlaleha karohano e 'ngoe le e' ngoe ea n * 1s	120	0,35-32767
LIEKETSENG	Temp_Timer	2	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	180	0,35-32767
LIHLOOHO	Mongobo_Timer	2	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	180	0,35-32767
Oxl 0	VOC_Timer	2	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	180	0,35-32767
EA-11-TS	Lebohang	2	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	300	0,35-32767
EA-12-TS	dB_Timer	2	= 0 Tima tlaleho > = 35 Tlaleha mong le e mong n * 1 s karohano	300	0,35-32767
Ox2F	Temp. unit	1	= 0 ° C = Ke ° F	0	0-1
0x32	T_OffSet	1	0 ~ 127: ((n-100) / 10) - (- 10-2.7) ° C -128-KE: (156 + n) / 10 (2.8-15.5) ° C	100	-128-127
0x33	RH_OffSet	1	n-20 = (- 20-20)%	20	0-40
0x34	CO2_OffSet	2	(n-500 (-500-500) ppm	500	0-1000
0x35	PM2.5OffSet	1	0 ~ 127: n-100 = (- 100-27) ug / m3 EA -128--1: 156 + n = (28-155) ug / m3	100	-128-127
0x36	Lux_OffSet	2	N-500-5000-5000) 1ux	5000	0-10000
0x37	VOC_Corileng	I	0 ~ 127: n-I00 = (- 100-27) maq -128-KE: 156 + n- (28-155) maq	100	-128-127
0x38	dB_Corileng	I	(N-50) = - 50-50	50	0- IOU
MOKHATLO	Ngola Feela	1	=== 0x55 Khutlisa setaele sa feme === OxAA Khutlisa default para.

Tiisetso e Lekanyelitsoeng ea selemo se 1

MCOHome e tiisa hore sehlahisoa sena ha se na liphoso tsa thepa le tšebetso tlas'a tšebeliso e tloaelehileng le e nepahetseng ea selemo se le seng ho tloha ka letsatsi la theko la moreki oa mantlha. MCOHome, ka khetho ea eona, e ka lokisa kapa ea nkela karolo efe kapa efe ea lihlahisoa tsa eona e ipakileng e fosahetse ka lebaka la mosebetsi o sa nepahalang kapa thepa. TIISETSO EE E MALILELE HA E KOPANE KOTSI EO E HLAHALITSOANG KE SETSO SE SEBETSANG, KOTSI, Tlhekefetso, Tlhekefetso, Tlokotsi ea Tlhaho, BATHO BA SEBETSANG KAPA BOPHELO BA motlakase Tiisetso ena e lekanyelitsoeng e ke ke ea sebetsa haeba: (i) sehlahisoa se ne se sa sebelisoe ho latela litaelo tse tsamaeang le sona, kapa (ii) sehlahisoa se ne se sa sebelisetsoe mosebetsi oa sona. Tiisetso ena e na le moeli hape ha e sebetse ho sehlahisoa sefe kapa sefe moo tlhaiso-leseling ea boitsibiso ea mantlha e fetotsoeng, e felisitsoeng kapa e tlositsoeng, e sa sebetsoang kapa e pakiloeng ka nepo, e rekisitsoeng e le letsoho la bobeli kapa e rekisitsoeng bocha khahlanong le Naha le melaoana e meng e sebetsang ea kantle ho naha.

MCOHome Technology Co, Ltd.

Litokomane / Lisebelisoa

MCO HOME 9 ho 1 Multi-Sensor [pdf] Bukana ea Mosebelisi 9 ho 1 Multi-Sensor

Litšupiso

• Bukana ea Mosebelisi