Marshall CV226 Lipstick HD Khamera e nang le 3G kapa HD-SDI Bukana ea Mosebelisi
1. Lintlha tse akaretsang
Re leboha ha u rekile Marshall Miniature kapa Compact Camera.
Sehlopha sa Marshall Camera se khothaletsa ho bala ka botlalo tataiso ena bakeng sa kutlwisiso e tebileng ea meno a skrineng (OSD), ts'ebetso ea thapo ea "breakout", "Tlhatlhobo ea litlhophiso", "ho rarolla mathata" le tlhaiso-leseling e ngoe ea bohlokoa.
Ka kopo tlosa ka botlalo litaba tsohle tsa lebokose, tse lokelang ho kenyelletsa likarolo tse latelang:
CV226 / CV228 e kenyelletsa:
- Khamera e nang le thapo ea ho phatloha (Matla/RS485/Audio)
- Phepelo ea motlakase ea 12V
Khamera ea CV226/CV228 e sebelisa 'mele o hlophisitsoeng oa maemo a leholimo ohle o nang le CAP e lekantsoeng ea IP67 e ka tlosoang (chelete ho ea ka nako ea oache) ho hlahisa lense ea M12 eo le eona e ka fetoloang ho lokisa boemo bo botle ba lense holim'a lense. Hape, e ka fetoloa ka lilense tse ling tsa M12 tse nang le bolelele bo ikhethileng ho fetola AOV.
Khamera e 'ngoe le e' ngoe e tla ea kamehla ho 1920x1080p @ 30fps ka ntle ho lebokose, e ka fetoloang ho OSD Menu ho ea ho liqeto tse fapaneng le liforeimi.
Ho RESET Khamera ho li-setting tsa kamehla (1920x1080p30fps) kh'amera e tsamaisang motlakase ka matla, ebe u sebelisa combo e latelang ho OSD Joystick: UP, DOWN, UP, DOWN, ebe o sutumelletsa le HO TŠOARA joystick ka metsotsoana e 5 ebe oa lokolla.
3. TAOLO EA WB
Khetha WB CONTROL o sebelisa konopo ea UP kapa DOWN. O ka fetola lipakeng tsa AUTO, ATW, PUSH, le MANUAL o sebelisa konopo ea LEFT kapa LETJANE
- AUTO: E laola tokiso ea othomathike ea mocheso oa 'mala oa mohloli oa leseli ho 3,000 ~ 8,000°K.
- ATW: E lula e fetola tekanyo ea mebala ea khamera ho latela phetoho leha e le efe ea mocheso oa 'mala. E lefella liphetoho tsa mocheso oa 'mala ka har'a sebaka sa 1,900 ~ 11,000°K.
- PUSH: Mocheso oa mocheso oa mebala o tla fetoloa ka letsoho ka ho tobetsa konopo ea OSD. Beha pampiri e tšoeu ka pel'a khamera ha konopo ea OSD e tobetsoa ho Fumana sephetho se nepahetseng.
- MOKHOA OA: Khetha White Balance ena ka letsoho. U ka fetola boemo ba molumo o moputsoa le o mofubelu ka letsoho.
»MALA TEMP: Khetha mocheso oa mebala ho tloha HO LOW, HARE, kapa HIGH.
» PUO E PUTSOA: Fetola molumo o Boputsoa oa setšoantšo.
» FUDUDU E FUBEDU: Fetola molumo o Mofubelu oa setšoantšo.
Fetola White Balance pele ka ho sebelisa mokhoa oa AUTO kapa ATW pele o fetohela ho mokhoa oa MANUAL. White Balance e kanna ea se sebetse hantle tlasa maemo a latelang. Tabeng ena, khetha mokhoa oa ATW. - Ha khanya e sa bonahaleng ea taba e le lerootho.
- Haeba khamera e lebisitsoe lebone la fluorescent kapa e kentsoe sebakeng seo khanya e fetohang haholo, tšebetso ea White Balance e ka fetoha e sa tsitsang.
4. TAOLO EA AE
Khetha AE CONTROL o sebelisa konopo ea UP kapa DOWN. O ka khetha AUTO, MANUAL, SHUTTER, kapa FLICKERESS mode ho tsoa ho sub menu.
- MOKHOA: Khetha mokhoa o lakatsehang oa ho pepeseha.
»AUTO: Boemo ba ho pepeseha bo laoloa ka bo eona.
» MANUAL: Fetola BRIGHTNESS, GAIN, SHUTTER, le DSS ka letsoho.
» SHUTTER: Shutter e ka hlophisoa ka letsoho mme DSS e laoloa ka bo eona.
TLHOKOMELISO: Shutter le DSS li laoloa ka bohona. - KHANYA: Fetola boemo ba ho kganya.
- AGC LIMIT: E laola amplification / gain process ka tsela e iketsang haeba khanya e oela tlas'a boemo bo ka sebelisoang. Khamera e tla phahamisa phaello ho moeli o khethiloeng oa phaello tlas'a maemo a lefifi.
- SHUTTER: Controls the shutter speed.
- DSS: Ha boemo ba khanya bo le tlase, DSS e ka fetola boleng ba setšoantšo ka ho boloka boemo ba khanya. Lebelo le butle la shutter le lekanyelitsoe ho x32.
5. MORAO LESENYA
Khetha BACK LIGHT u sebelisa konopo ea HO PHAHAMA kapa TLASE. U ka khetha mofuta oa BACK LIGHT, ACE, kapa ECLIPSE ho tsoa ho sub menu.
- LESEDI LA KA MORAO: E lumella kh'amera ho lokisa ponahatso ea setšoantšo sohle ho pepesa taba hantle ka pele.
»WDR: E nolofalletsa mosebelisi ho view ka bobeli ntho le semelo li hlakile haholoanyane ha semelo se khanya haholo.
»BLC: E nolofalletsa ts'ebetso ea matšeliso a mabone a morao.
»SPOT: E thusa mosebelisi ho khetha sebaka seo a se batlang setšoantšong le view sebaka ka ho hlaka ha bokamorao bo kganya haholo. - ACE: Tokiso ea khanya ea sebaka sa setšoantšo se lefifi.
- ECLIPSE: Totobatsa sebaka se khanyang ka lebokose la masking le nang le 'mala o khethiloeng.
6. TSAMAISO EA LITŠOANTŠO
Khetha IMAGE STABILIZER u sebelisa konopo ea HO PHAHAMA kapa TLASE. U ka khetha RANGE, FILTER, le AUTO C ho tsoa ho sub menu.
- IMAGE STABILIZER: E fokotsa ho fifala ha setšoantšo ka lebaka la ho thothomela ho bakoang ke ho tsukutla letsoho kapa ho sisinyeha ha khamera. Setšoantšo se tla atameloa ka mokhoa oa digital ho lefella lipikselse tse fetotsoeng.
» RANGE: Beha boemo ba katametso ea dijithale bakeng sa ho tsitsisa setšoantšo. Max 30% = x1.4 Digital Zoom.
»SEFELI: Khetha boemo ba sebatli sa tokiso bakeng sa boemo bo bobe ka ho fetesisa ba setšoantšo. Holimo = Ho Nyane Tokiso.
»AUTO C: Khetha boemo ba setšoantšo sa auto cantering ho latela mofuta oa vibrate. E Felletse = Ho thothomela ho matla, Halofo = Ho thothomela ho honyenyane.
7. TAOLO EA SETŠOANTŠO
Khetha IMAGE CONTROL o sebelisa konopo ea UP kapa TLASE. O ka fetola likarolo tsohle tse amanang le setšoantšo ho tsoa ho menu e nyane.
- BOEMO BA MALA: Fetola boleng ba boemo ba 'mala bakeng sa pina e ntle ea mebala.
- SHARPNESS: Fetola bohale ba setšoantšo bakeng sa polelo e boreleli kapa e bohale.
- MIRROR: Video e hlahisoang e pota-potiloe ka holimo.
- FLIP: Video e hlahisoang e potoloha ka holimo.
- D-ZOOM: Atometsa video e hlahisoang ka mokhoa oa 16x.
- DEFOG: E eketsa ponahalo maemong a leholimo a feteletseng, joalo ka moholi, pula kapa ka khanya e matla haholo.
- DNR: E fokotsa lerata la video maboneng a tlase.
- MOTION: E shebella motsamao oa ntho ka sebaka sa motsamao le kutlo tse seng li setiloe ka menyu e nyane. Letšoao la ho lemoha motsamao le ka hlahisoa.
- SHADING: Lokisa boemo ba khanya bo sa tsitsang setšoantšong.
- BLACK LEVEL: E fetola boemo ba video e ntšo ka mehato e 33.
- GAMMA: E fetola boemo ba video ea gamma ka mehato e 33.
- FRAME RATE: Fetola tlhahiso ea video.
Kgetha FRAME RATE u sebelisa konopo ea LEFT kapa LERIGHT. Litefiso tse teng tsa foreimi ke: 720p25, 720p29 (720p29.97), 720p30, 720p50, 720p60, 1080p25, 1080p30, 1080i50, 1080i60p 1080p50 1080p60 (720p59), 720p59.94 (1080p29), 1080i29.97 (1080i59), le 1080p59.94 (1080p59)
8. BONTŠA TAOLI
Khetha IMAGE STABILIZER u sebelisa konopo ea HO PHAHAMA kapa TLASE. U ka khetha RANGE, FILTER, le AUTO C ho tsoa ho sub menu.
- CAM VERSION: Bontša mofuta oa firmware oa khamera.
- CAN SEHLOOHO: Sehlooho sa khamera se ka kenngoa ho sebelisoa keyboard ea sebele 'me se tla koahela video.
- PRIVACY: Libaka tsa mask moo u batlang ho ipata skrineng.
- CAM ID: Khetha nomoro ea ID ea khamera ho tloha ho 0 ~ 255.
- BAUDRATE: Beha sekhahla sa khamera ea baud ea puisano ea RS-485.
- PUO: Khetha menu ea OSD ea Senyesemane kapa ea Sechaena.
- DEFECT DET: Fetola lipikselse tse sebetsang ka ho fetola boleng ba moeli.
Lense ea khamera e tlameha ho koaheloa ka botlalo pele o kenya menu ena.
9. SETA BOPHELO
Kgetha RESETA O sebedisa konopo ya UP kapa DOWN. U ka seta litlhophiso bocha ho FACTORY kapa USER litlhophiso tse bolokiloeng. Kgetha HO TSAMAA kapa FETOHA ka ho sebedisa konopo ya LETELE kapa HO LETSA.
- BUTSE: Beha tlhophiso ea ho seta botjha ho khamera ho FACTORY kapa USER litlhophiso tse bolokiloeng tse hlalosoang ho tsoa ho CHANGE menu.
Ka kopo etsa bonnete ba hore u khetha mokhoa o nepahetseng pele u seta khamera bocha. - FETOHA: Fetola mokhoa oa ho seta bocha kapa boloka maemo a hajoale joalo ka USER.
» fektheri: Khetha FACTORY haeba ho hlokahala hore ho be le maemo a kamehla a feme. FRAME RATE, CAM ID, le BAUDRATE li ke ke tsa fetoha.
USER: Khetha USER haeba USER tlhophiso e bolokiloeng e hloka ho kenngoa.
» BOLOKA: Boloka litlhophiso tsa hajoale joalo ka USER e bolokileng.
10. HO TS'EHLA MOLEMO
Warranty
Bakeng sa lintlha tsa Warranty ka kopo sheba ho Marshall webleqephe la sebaka: https://marshall-usa.com/company/warranty.php
20608 Madrona Avenue, Torrance, CA 90503 Mohala: (800) 800-6608 / (310) 333-0606 · Fekse: 310-333-0688
Www.marshall-usa.com
support@marshall-usa.com
Litokomane / Lisebelisoa
 |
Marshall CV226 Lipstick HD Khamera e nang le 3G kapa HD-SDI [pdf] Buka ea Mosebelisi CV226, CV228, CV226 Lipstick HD Khamera e nang le 3G kapa HD-SDI, Lipstick HD Khamera e nang le 3G kapa HD-SDI |
 |
Marshall CV226 Lipstick HD Khamera [pdf] Buka ea Mosebelisi CV226 Lipstick HD Khamera, CV226, Lipstick HD Khamera, HD Khamera |
References
-
Marshall Electronics - Professional Broadcast Miniature / Compact / Indoor 4K / UHD / HD lik'hamera, 4K Rack Mount / Desktop Monitors, Hardware le Lisebelisoa.
-
Marshall Electronics - Boitsebiso ba Tiisetso
