Instruction Manual for rapidine models including: Profile Leg Back to Back Workstations, Profile, Leg Back to Back Workstations, Back to Back Workstations, Back Workstations, Workstations
Deluxe Infinity Profile Leg 6 Person Back To Back Workstation - No Scr
Infinity Back to Back Profile Leg Workstation | Rapidline
Assembly Instructions:
Deluxe Infinity Profile Leg Back to Back Workstations
Time Required:
40-45 minutes
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required:
Easy
Hard
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
NOTE · As this is a commercial product, some intermediate skills may be required.
· No pre-drill holes or markings are provided on our table or desk tops. · Please check you have all hardware before assembling.
· If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
· Please retain your receipt as proof of purchase to validate your warranty. · Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
· Remove all wrapping materials, including staples and packing straps before you start to assemble · Keep all hardware parts out of reach of children. CAUTION
· Heavy product. Do not attempt to lift or move without help · Do not tighten screws and bolts until completely assembled. · Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING · If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
· Failure to follow these warnings could result in serious injury.
Assembly Instructions
MODEL NO: Profile Leg Back to Back - 2 Person
Screw
STEP1
0
0
A{T187)
2PCS
2PCS
STEPS
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2
[i+ l
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2
[i+ l
Assembly Instructions
MODEL NO: Profile Leg Back to Back - 4 Person
STEP1
0
0
A(T187)
4PCS
2PCS
STEP4
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2
[i+ l
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2
[i+ l
Assembly Instructions
MODEL NO: Profile Leg Back to Back - 6 Person
STEP1
0
0
A{T187)
6PCS
1
CfP
STEPS
STEP4
2PCS
6D
M=4PCS
2PCS
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2
[i+ l
IMPORTANT NOTE:
· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don't tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2
[i+ l
Acrobat Pro DC 22.2.20191 Acrobat Pro DC 22.2.20191