Chicco Baby Monitor Video Deluxe

Package Contents

• 1 Baby Unit
• 1 Parent Unit
• 2 Switching Mains Adapters (100-240V~ 50/60Hz / 5Vdc, 1A)
• 1 Instruction Manual

General Warnings & Safety

WARNING! Read the instructions before use.

The Deluxe Video Baby Monitor is intended as a monitoring aid and not as a substitute for adult supervision. Keep packaging materials away from children.

General Safety Precautions:

• Do not use if the product or components are damaged. Contact qualified personnel or dealer.
• Do not attempt to repair the product yourself. Contact Artsana S.p.A. Customer Service.
• Do not open the devices; they contain no user-serviceable parts and opening may cause electric shock.
• Place units out of reach of children on a flat, stable surface.
• Keep units and adapters out of reach of children; cords can pose a strangulation hazard.
• Regularly check signal reception, especially before each use and at maximum intended distance.
• Maximum operating distance is approximately 220 meters in open space; range may be reduced indoors due to walls, furniture, metal structures, and electromagnetic interference.
• Do not expose units, batteries, or adapters to weather (rain, sun). Use parent unit on battery power only outdoors; adapters are not for outdoor use.
• Keep units and adapters away from heat sources (radiators, stoves, direct sunlight) to prevent overheating.
• Never use units near water (bathtubs, sinks, wet surfaces). Do not immerse or wet the units/adapters. If dropped in water, contact expert personnel.
• Ensure adequate ventilation for units and adapters to prevent overheating.
• Avoid use near fluorescent lamps or other electrical appliances (TVs, computers, radios, microwaves) that may cause interference.
• Use only supplied AC/DC adapters or identical types. Using other adapters may damage the unit and pose a danger.
• Ensure adapter voltage matches your mains supply and plug is compatible.
• Connect adapters to accessible sockets, out of children's reach. Position cords to prevent tripping, entanglement, or access by children.
• Units and adapters may become warm during operation; this is normal.
• Periodically inspect adapters for damage; do not use if damaged.
• Unplug adapters when not in use or when units are disconnected.
• Adapter power cords are non-replaceable; replace the entire adapter if damaged.
• The baby unit has a photosensitive sensor that activates infrared LEDs for night vision. Infrared LEDs are not visible and are not harmful. Check night vision by observing the parent unit display in low light.
• Risk of Explosion: Do not replace batteries with incorrect types.
• It is not advisable to look directly at infrared radiation with the naked eye or optical devices.
• WARNING: The transmitter, adapter, and power cord must be kept out of reach of children.
• When lullabies play, sounds from the baby may be less audible; monitor the parent unit attentively.
• Night vision alters image colors; images appear black and white in darkness, which is normal.
• When using the 'Talk to Me' function, avoid speaking too close to the parent unit microphone to prevent excessively loud sounds reaching the child.
• Do not press 'Talk to Me' if units are too close (within 3 meters) to avoid noise or rustling.
• Product performance may be reduced if multiple monitoring devices are used simultaneously.
• If parent unit volume and display are deactivated, speaker volume automatically resets to level 1 for continuous monitoring.
• Adjusting or deactivating parent unit volume also adjusts/deactivates acoustic alarms; pay closer attention to the parent unit in such cases.
• Battery Disposal Warnings: Do not dispose of batteries in fire, hot ovens, or crush/cut them (risk of explosion). Avoid extremely high temperatures or low air pressure environments for batteries. Do not expose batteries to excessive heat.

Configuration and Features

1.1 Baby Unit

Power Supply: External via 100-240V~50/60Hz / 5Vdc, 1A switching mains adapter.

Transmission:

• Frequency Band: 2412~2469MHz
• Signal Strength: < 19dBm

Components:

• 1. Switching Mains Adapter
• 2. Power Indicator Light: Steady green (on), OFF (off).
• 3. Power Connector
• 4. Camera
• 5. Infrared Lighting System
• 6. Photosensitive Sensor
• 7. Microphone
• 8. Pairing Button
• 9. Speaker
• 10. Temperature Sensor

1.2 Parent Unit

Power Supply: External via 100-240V~50/60Hz / 5Vdc, 1A switching mains adapter. Internal: 3.7V 2000mAh lithium battery (non-replaceable).

Reception:

• Frequency Band: 2412~2469MHz
• Signal Strength: <19 dBm

Components:

• 1. Switching Mains Adapter
• 2. On/Off Button
• 3. Power Indicator Light: Steady green (on), Flashing green (low battery), OFF (off).
• 4. Charge Indicator Light: Steady green (charged), Steady red (charging), OFF (adapter not connected).
• 5. Sound Indicator Bar: Lights indicate sound intensity (green for lower, red for higher).
• 6. Power and/or Charging Connector
• 7. Speaker
• 8. Microphone
• 9. 4.3" Color Display
• 10. Setting/Browsing Buttons
• 11. Menu Access and Setting Confirmation Key
• 12. Menu Exit and "Talk to Me" Key
• 13. Digital Zoom Key
• 14. RESET Key
• 15. Base
• Non-replaceable rechargeable lithium battery

Operation

2.1 Unit Positioning

Place Baby Unit 1-1.5 meters from the child, camera facing the child. Place Parent Unit at least 3 meters from Baby Unit, preferably in a different room, to avoid feedback.

2.2 Baby Unit On/Off

Connect the mains adapter to the Baby Unit's power connector (3) and a wall socket. The unit turns on automatically (green indicator light 2). Disconnect the adapter to turn off.

2.3 Parent Unit On/Off and Charging

Press and hold the On/Off button (2) for ~3 seconds to turn on/off. Connect the mains adapter (1) to the Parent Unit's connector (4) and a wall socket to charge. Charging indicator (4) shows red (charging) or green (charged).

For faster charging, connect the Parent Unit while it is off. The unit can be used while charging, but charging will take longer.

2.4 Automatic Night Vision

The photosensitive sensor (6) activates infrared lighting (5) in low light conditions for night vision. An icon appears on the display bar (9).

2.5 Deactivating the Display

Press the Parent Unit's On/Off button (2) once to turn off the display for energy saving. Press again to reactivate.

2.6 Adjusting Parent Unit Volume

Use buttons (10) to adjust volume (5 levels). The speaker turns off at the minimum level.

2.7 Adjusting Display Brightness

Use buttons (10) to adjust display brightness (5 levels).

2.8 2X Digital Zoom

Press zoom key (13) to activate 2x zoom. Use navigation buttons (10) to pan. Press zoom key (13) again to return to normal view.

2.9 Reset

If the Parent Unit locks up, press the reset key (14) with a pointed tool. Press On/Off button (2) to restart if necessary.

2.10 'Talk to Me' Function

Hold button (12) to speak through the Parent Unit's microphone (8). Release to stop. When active, sounds from the Baby Unit are not heard on the Parent Unit, and an icon is displayed.

2.11 Function Setting Menu

Access the main menu by pressing menu key (11). Navigate with buttons (10) and confirm with (11). Exit with (12) or after 30 seconds.

• 2.11.1 Pairing: If units fail to communicate, initiate pairing from the menu. Press Baby Unit pairing button (8) within 30 seconds of screen prompt.
• 2.11.2 Voice Activation: Choose between continuous transmission or Voice Activation (VOX) mode. VOX saves energy by activating the display/speaker only when sound exceeds a set threshold. Select sensitivity levels (low, medium, high) using icons: ⚪ (low), ? (medium), ? (high).
• 2.11.3 Reminder Function: Set timed reminders for child care (1.5 to 3.5 hours). A reminder icon appears on the display.
• 2.11.4 Lullaby Function: Play two lullabies and three relaxing sounds. Select single tracks or play them cyclically. Set playback duration (15-90 minutes).
• 2.11.5 Temperature Alarm Setting: Set ideal temperature range and measurement unit (°C). Receive an acoustic alarm if temperature goes outside the set range.
• 2.11.6 Factory Settings: Reset all settings to default values.

2.12 Acoustic Alarms

• Link Loss Alarm: An audible alarm sounds on the Parent Unit if the connection with the Baby Unit is lost. An icon H appears. Alarm stops when connection is restored.
• Low Battery Alarm: An audible alarm sounds, power indicator (3) flashes green, and a low battery icon appears in red on the display (9) when the battery is low. Charge the battery to silence the alarm.
• Reminder Alarm: An audible alarm sounds when a set reminder expires. An icon appears on the display (9). Press any key to deactivate.
• Temperature Alarm: An audible alarm sounds if the room temperature falls below or rises above the set range. An icon appears on the display (9). Press any key to deactivate.

Technical Data

• Transmission: Audio/video via FHSS digital technology.
• Operating Range: Approx. 220 meters in open space without obstacles. (Range reduced indoors by environmental factors).
• Mains Adapter: Model K05S050100G, Input: 100-240V~ 50/60Hz 0.2A, Output: 5Vdc, 1A.
• Rechargeable Battery: Li-Polymer, 2000mAh, 3.7V.
• Battery Performance: Best at normal room temperature (20°C ± 5°C).
• Battery Charging Temperature: 10°C to 40°C.

Index of Symbols

• AC: Alternating Current
• DC: Direct Current
• Indoor Use Only: For indoor use exclusively.
• Class II: Double insulation equipment.
• CE Compliance: Complies with relevant EC directives.

Disposal

This product complies with EU Directive 2012/19/EU (WEEE). Do not dispose of with domestic waste. Take to designated collection points for electrical and electronic equipment.

Batteries comply with EU Directive 2006/66/EC. Do not dispose of batteries with domestic waste. Return to collection points or retailers. Symbols Hg, Cd, Pb indicate battery contents (Mercury, Cadmium, Lead).

Declaration of Compliance

Shenzhen Videotimes Technology Co.,Ltd declares that the radio equipment MOD. 06949 complies with Directive 2014/53/EU. Full text available at: www.chicco.com/declarations.

This product is Class 1 and can be used freely in all European Union countries.

Warranty

The product is guaranteed against conformity defects under normal use. Warranty void for improper use, wear, or accidents. Refer to national laws for warranty duration.

Artsana S.p.A. reserves the right to modify manual contents without notice. Reproduction or translation without written consent is prohibited.