Instruction Manual for Aikerui models including: GOX 2BMJR, 2ADII-L9, GO X Phone Stand with Bluetooth Speaker, GO X, Phone Stand with Bluetooth Speaker, Stand with Bluetooth Speaker, Bluetooth Speaker, Speaker

GO X蓝牙音箱说明书

L9 Phone Stand With Bluetooth Speaker

Shenzhen Kingamei, L9, 2ADII-L9, 2ADIIL9, L9 Phone Stand, Phone Stand, Stand, L9 Phone Stand With Bluetooth Speaker, Phone Stand With Bluetooth Speaker, Stand With Bluetooth Speaker, User Manual

User Manual

Shenzhen Aikerui Electronics Co., Ltd. GOX 2BMJR-GOX 2BMJRGOX gox


File Info : application/pdf, 2 Pages, 1.31MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7891943
Note: Before using this product, please use a Type-C cable to connect it to the power source first.

Model: GO X

Adjust the angle and height of the phone stand

Unboxing Check
Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package List
Phone Stand Speaker x 1 USB cable x 1 User manual xl
Warnings
The power requirement of this product is USB DC 5V/1A. Once the range exceeded, please use the regulator device, otherwise it will affect its service life.

Product Specification
Product model: GO X Product material: ABS Product weight: 298g Type-c Input: DC 5V 1A Power of speaker: 45W Battery capacity: 1500mAh Bluetooth version: Bluetooth 5.0 Bluetooth name: GO X Charging time: about 2-3hours Product size: 4.92x3.35x1.97 inches
Features
· With a detachable phone stand, free your hands · Wireless Bluetooth connection support · Bluetooth hands-free audio · Portable speaker - enjoy music anywhere/anytime · Compatible with most smartphones/tablets/laptops

Unfold the phone stand

Activate Bluetooth & Pair with your cellphone
1. The device automatically enters Bluetooth mode after it is turned on.
2. Wait for `GO X' to appear on your Bluetooth device list. Click it to pair with your cellphone.
3. When you hear the voice "Bluetooth connected", your cellphone and the speaker Bluetooth connection is successful.

Pause/Play/Light Effect Short press - Pause/Play Long press - Change light effect
Previous/Light Off Short press - Previous song Long press - Turn off the lights
Microphone
Volume up/down Twist clockwise - Volume up Twist counterclockwise - Volume down

LED Lights
Next Song/Light Effect Short press - next song Long press - run all light effects.
Answer/Hang up/Power on/off Short press - Answer/Hang up Long press 2-3secends the Speaker ON/OFF
Speaker

When the phone stand is folded, this lever is locked. Please pull up this lever first, then you can adjust the height of the phone stand.

There are multiple lighting effects for you to choose. Long press æ to change the color and flash mode of the light.
When an incoming call rings, short press ì to answer through the built-in mic of the speaker. Music pauses during the call and plays again when the call ends.

Notice:
1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product is suitable for indoor use. 3. When listening to music, please keep a proper volume.

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.


Adobe PDF library 15.00