User Guide for tp-link models including: UE306 USB to Ethernet Network Adapter, UE306, USB to Ethernet Network Adapter, Ethernet Network Adapter, Network Adapter, Adapter
Wired Networks: TP-LINK UE300 V5 USB 3.0 to Gigabit Ethernet Network Adapter Datasheet
File Info : application/pdf, 3 Pages, 240.58KB
DocumentDocumentUser Guide USB to Ethernet Network Adapter ATTENTION When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Keep the device away from water, fire, humidity or hot environments. Operating Temperature: 0¥~40¥ (32 ~104) This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS)defined in the standard of IEC 62368-1. Recycling This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/ For technical support, replacement services, the user guide and more information, please visit https://www.tp-link.com/support, or simply scan the QR code. FCC compliance information statement Product Name: USB 3.0 to RJ45 Gigabit Ethernet Network Adapter Model Number: UE306 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2024-04-01 This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Using the Adapter This adapter supports Plug and Play feature. Plug in and wait for seconds. Then this adapter is ready to use. For Windows 7/8 and Mac OS, please download and install a driver by visiting our official website www.tp-link.com and searching the model number. Note: UE306 only supports Mac OS X 10.9 and later versions. wired network RJ45 Port UE306 computer * Works with Nintendo Switch wired network RJ45 Port UE306 USB 3.0 USB USB Nintendo Switch LED Explanation LED White White Status On Flashing Indication Both the adapter and Ethernet cable are properly connected Network data is being transferred BSMI Notice nit PCB Lead (Pb) - Mercury Cadmium (Hg) (Cd) Hexavalent chromium Cr+6 Polybrominated Polybrominated biphenyls diphenyl ethers (PBB) (PBDE) 1. 0.1 wt %0.01 wt % Note 1"Exceeding 0.1 wt %"and"exceeding 0.01 wt %"indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2""indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The""indicates that the restricted substance corresponds to the exemption. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Explanation of the symbols on the product label Note: The product label can be found at the bottom of the product (and its .I.T.E power supply if any). Symbols may vary from products. Class II equipment Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector Dangerous voltage Caution, risk of electric shock Energy efficiency Marking Protective earth Earth Frame or chassis Functional earthing Caution, hot surface Caution Operator's manual Stand-by "ON"/"OFF" (push-push) Operator's manual Operator's manual RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Caution, avoid listening at high volume levels for long periods Disconnection, all power plugs m Switch of mini-gap construction µ Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US) Switch without contact gap (Semiconductor switching device)