ROOF FOR AIR HEAT PUMP

OPERATING INSTRUCTIONS - Original instructions

Parts List

• A: Support Brackets (2x)
• B: Roof Panel (1x)
• C: Washers (6x)
• D: Screws (6x)
• E: Spacers (4x)
• F: Wall Plugs (4x)
• G: Wall Screws (4x)

Installation Instructions

Step 1: Attach Roof Panel to Brackets

Place the roof panel (B) onto the support brackets (A). Align the holes on the roof panel with the holes on the brackets. Insert screws (D) with washers (C) through the roof panel and into the brackets. Tighten the screws securely.

Diagram 1: Shows the roof panel (B) being attached to the support brackets (A) using screws (D) and washers (C).

Step 2: Mount to Wall

Position the assembled roof structure against the wall where it will be installed. Mark the mounting points through the holes in the support brackets. Drill holes at the marked locations and insert wall plugs (F). Insert spacers (E) into the wall plugs. Align the roof structure with the wall plugs and insert wall screws (G) through the brackets and into the spacers and wall plugs. Tighten the screws securely.

Diagram 2: Illustrates mounting the roof structure to the wall using wall plugs (F), spacers (E), and wall screws (G).

For the latest version of operating instructions, refer to the Jula website.

WWW.JULA.COM

JULA AB 2025-07-08

JULA AB

BOX 363, 532 24 SKARA, SWEDEN