Installation Guide for PHANTEKS models including: REVOLT 1000, REVOLT 1000 Power Supplies, Power Supplies, Supplies
Phanteks Revolt | 1000 | White
01 CHOOSE YOUR CABLES 02 INSTALL POWER SUPPLY INTO CHASSIS 03 CONNECT CABLES TO POWER SUPPLY INSTALLATION GUIDE The Revolt power supply comes as a cable free model, cables are purchased separately. Make sure the cables are compatible with the Phanteks Revolt
Phanteks Revolt – 1000 | White
INSTALLATION GUIDE SUPPORTS PH-P1000PR_BK01C PH-P1000PR_WT01C PH-P1200PR_BK01C PH-P1200PR_WT01C PH-P1600PR_BK01C PH-P1600PR_WT01C PH-P1300TR_BK01C PH-P1300TR_WT01C PH-P1600TR_BK01C PH-P1600TR_WT01C PH-P2200PR_BK01C ACCESSORIES INCLUDED INCLUDED ACCESSORIES User Manual POWER SUPPLY REVOLT Installation Guide PSU Bag Zip Tie Bag Velcro Bag ZIP TIE BAG Screw Pack Power Cable MANUAL WARRANTY VELCRO BAG POWER CABLE 1500MM SCREW PACK AVAILABLE OUTPUT CONNECTORS MOTHERBOARD 10+18-PIN CPU | PCIe 8-PIN PCIE GEN5.1 12V-2X6 SATA | MOLEX 6-PIN CONNECTOR QUANTITY Motherboard 10+18-PIN CPU | PCIe 8-PIN PCIe GEN5.1 12V-2x6 SATA | MOLEX 1000/1200 watt models 1300 watt models 1600/2200 watt models 1 1 1 5 9 9 1 1 2 5 6 6 FOLLOW US ON SOCIAL MEDIA Instagram Phanteks Facebook Phanteks YouTube Phanteks Twitter @phanteks SUPPORT US & Canada support@phanteksusa.com International support@phanteks.com INSTALLATION GUIDE 01 CHOOSE YOUR CABLES The Revolt power supply comes as a cable free model, cables are purchased separately. Make sure the cables are compatible with the Phanteks Revolt power supply before proceeding. 03 CONNECT CABLES TO POWER SUPPLY Connect all needed cables to the power supply according to the overview below. The exact connector lay-out and quantity may be different depending on the model. 05 ULTIMATE SILENCE WITH HYBRID FAN CONTROL Activate the 0 RPM mode with the Hybrid Fan button on the rear to go for absolute silence when under low load. The Revolt will control the fan speed intelligently based on load and temperature. Cables sold separately 02 INSTALL POWER SUPPLY INTO CHASSIS Install the Revolt PSU in the computer chassis using the 4x PSU screws. Follow the chassis instruction manual. INSTALL PSU SCREW 4x 04 PCIE GEN5.1 GPU CONNECTOR The Revolt is equipped with the PCIe GEN5.1 (12V-2x6) GPU connector. Make sure it is fully seated and clicked in to prevent any damage to your system. Note that a compatible GPU is required. Hybrid Fan Mode is turned on when the button is in the `OUT' position and turned off when pushed `IN'. 06 CONNECT POWER CABLE Connect the power cable to the power supply and a grounded power outlet respectively. Make sure the power supply is turned off `O' before connecting it to a power outlet. PCIE GEN5.1 12V-2X6 CABLE PRO TIP Pre-connect all needed cables to the PSU before installing it into the chassis. See step 3 07 BE SAFE! Switch the power button to the `I' position to turn on your system. When making any changes to the hardware, be sure that the power button is switched from the `I' to the `O' position so the power supply is turned off. Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.Adobe PDF Library 17.0 Adobe InDesign 19.5 (Windows)