User Manual for MAXVIEW models including: MXL003 Seeker Wireless Satellite System, MXL003, Seeker Wireless Satellite System, Wireless Satellite System, Satellite System, System
Software Updates | Maxview Ltd
File Info : application/pdf, 4 Pages, 5.97MB
DocumentDocumentPC users Seeker Wireless - software update procedure for PC users Please follow these instructions to update your MXL003 Seeker Wireless Satellite System STEP 1 - Download file 1. You need an empty/blank USB flash memory stick, no larger than 32Gb, to copy the file onto. Please make sure it is formatted to FAT. See page 4 for more details. 2. Insert your USB memory stick into an empty slot on your Mac desktop or laptop. 4. Click on the `DOWNLOAD' button on the screen to begin downloading the HEX File onto your system. 3. Find the software update section on the Maxview website https://maxview.co.uk/software-updates/ Click on the Seeker Update File link to go do a separate download page. 5. Once downloaded, the file will appear in the bottom left hand side of the box (on google chrome) as shown above. Click `Show in Folder'. 6. Next locate HEX file, right click and select copy. 7. Paste the file onto the USB drive (SEEKER) Please continue on the next page STEP 2 - Update file to control box Power on SYNC/ SYNC/ USB Update Update port button LED 1. Turn on Control Box. Push in and hold for 7 seconds 2. Press and hold the SYNC/Update button on the front of the Control Box for approximately 7 seconds until SYNC/update LED illuminates RED. LED goes out Turn off power Remove USB stick 3. Insert the USB flash memory stick. The SYNC LED will flash GREEN whilst data is being transferred. Transfer can take between 10-60 seconds. 4. When the SYNC LED goes out turn off the Control Box power and remove the USB flash memory stick. Power on LED will flash Red & Green 5. Turn power on, update LED will flash RED and GREEN whilst data is written to Control Box memory. STEP 3 - Pairing Update complete 6. When SYNC LED goes out update is complete. LED lights green Press and release button Press for 1 second 1. The Control Panel will read ERROR RF so you will need to pair the Control Panel and Control Box. Please continue for Troubleshooting 2. Briefly press (1 second) and release the SYNC/update button on the front of the Control Box. The Status LED will illuminate green. 3. Press Satellite UP or Down button on the panel to pair. Your control box and control panel are now paired. You are now ready to use your Seeker Wireless Satellite System. Please Note: Once the update is complete the Control Box will default back to ASTRA 19. If you use ASTRA 28 then press the SAT button up then press Search. Troubleshooting Formatting USB stick 1. Right click removable disk option (USB stick) in `computer' Select FAT or FAT32 2. Right click and select format Select start 3. Format USB Stick by selecting FAT or FAT32 (Please note any files on USB stick will be erased) Select OK 4. Your USB stick is ready for the update file. SeekerupdatePC Iss 8 07/11/2023