T35 Wireless Earphones

Product Overview

This document provides comprehensive details regarding the T35 Wireless Earphones, manufactured by Shenzhen Anshengye Technology Co., Ltd. It covers product specifications, operational guidance, and warranty information.

Dimensions: 75.00 mm (height) x 75.00 mm (width)

Product Parameters

• Working distance: 10m
• Impedance: 32Ω
• Sensitivity: 109±1.5dB
• Frequency Response: 20Hz-20KHz
• Play time: 7H
• Standby time: 50H

Packing List

• Headset: 2
• Charging compartment: 1
• Type-C charging cable: 1
• Instructions: 1

Wearing Guide

1. Rotate the earphones backward and fasten them securely, ensuring the earloop is comfortable and fits the curve of the back of the ear.
2. Adjust the sound output position for a comfortable fit.

Operating Instructions

• Power on: Long press for 2 seconds / Long press for 5 seconds
• Shutdown: Long press the touch area
• Voice Assistant: Press and hold for 2 seconds in the touch area
• Answer/End Call: Touch click
• Reject calls: Press and hold for 2 seconds in the touch area
• Suspend/Play music: Touch click
• Previous song: Double click on left ear
• Next song: Double click on the right ear (single ear use can only achieve this function)
• Volume increase: 3 strikes on the right ear
• Volume decrease: Left ear 3 hits (single ear use can only achieve volume increase)
• Switching between Chinese and English: Main function key for 4-touches headphones when not connected to the phone

Pairing and Connection

1. After opening the charging compartment, remove the headphones. The left and right headphones will automatically connect. For new device connections, open the device's Bluetooth and search for "T35" to pair. A "successful connection" prompt will be heard upon successful pairing.
2. The pairing status lasts for 5 minutes. If pairing fails, the device will automatically shut down.
3. Use the supplied charging cable for charging.
4. The device automatically shuts down after 5 minutes of disconnection.
5. A "Low battery, please charge in a timely manner" prompt will appear when the earphone battery is below 10%.
6. The device will automatically reconnect if it returns within the effective distance within 5 minutes after exceeding it.
7. If the product is not used for a long time, it should be fully charged first, and ensure the device is in a shutdown state.
8. Unplug the charging cable after charging to avoid equipment damage from prolonged charging.

Notes and Maintenance

• When the charging box cover is opened, the headphones automatically turn on and connect or pair. When placed in the charging box and the cover is closed, the headphones will be charged and turned off.
• Regular cleaning ensures a long lifespan. For long-term non-use, it is recommended to charge once every 15 days to extend battery life. Clean the charging contacts on the earphone tail plug with an alcohol-soaked cotton swab to ensure smooth charging and prevent poor contact.
• The battery pack or battery combination should not be exposed to direct sunlight, baking, or similar overheating environments.
• Due to the wireless connection and factors like environment, phone brand, and usage behavior, slight sound lag during music playback is normal.

Warnings

• Prolonged use of headphones at high volume may damage your hearing. Listen to calls and music at an appropriate volume.
• Do not rinse or immerse the product in water to avoid damage.
• Do not disassemble products and accessories without authorization to avoid damage and warranty failure.
• Do not subject the product to strong impact or vibration to avoid damage.
• Do not use chemical solvents or cleaning agents to clean the product.

Product Warranty Card

Warranty Details

1. Within three months from the date of purchase, if the machine malfunctions and is confirmed by Shenzhen Anshengye Technology Co., Ltd.'s technical personnel to have occurred under normal use, free repair and spare parts replacement services will be provided.
2. Shenzhen Anshengye Technology Co., Ltd. will refuse warranty services in the following situations:
   • Damage due to incorrect operation, negligent use, or unexpected events (natural or man-made disasters).
   • Repairs or modifications by non-authorized personnel.
   • Product serial number altered, modified, or removed.
   • Product not installed according to the original factory instructions.
3. The free service provided by this warranty card does not cover product accessories or decorative items.
4. Shenzhen Anshengye Technology Co., Ltd. is not responsible for any direct or indirect losses incurred due to equipment damage.
5. The content of this warranty card is subject to modification without prior notice.

Warranty Certificate

Please fill out and keep this warranty certificate properly.

• Model:
• Disposition Date:
• Purchase Store:
• After sales phone number:

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2BGHP-T35